• Maxillofacial Plastic and Reconstructive Surgery
• /
• 제30권2호
• /
• pp.165-171
• /
• 2008

The aim of this study was to evaluate the incidence of panoramic radiological risk signs related with mandibular third molar extraction, and the relationship between these risk signs and inferior alveolar nerve (IAN) injury after tooth extraction. Cases were defined as 1000 mandibular third molars extracted by surgical approach at Samsung Medical Center during the period from March 2001 to December 2006. Seven radiological risk signs were assessed on the panoramic radiogram by three expert oral surgeons. Clinical demographic data and severity of IAN injury were examined on medical records. Bivariate analyses were completed to assess the relationship between radiological risk signs and IAN injury. The radiological risk signs showed in 381 cases(38.1%). The incidence of each radiological risk signs were; interruption of IAN white line, 152 cases(15.2%); deflected roots, 141 cases(14.1%); darkening root, 119 cases(11.9%); diversion of IAN, 57 cases(5.7%) ; IAN narrowing, 37 cases(3.7%); root narrowing, 17 cases(1.7%); dark and bifid apex, 10 cases(1.0%). The incidence of IAN injury in cases with risk signs were: in the case of any sign, 3.6%; interruption of IAN white line, 2.6%; deflected roots 5.7%; darkening root. 3.4%; diversion of IAN, 5.7%; IAN narrowing, 3.7%; root narrowing, 5.9%; dark and bifid apex, 0%. No IAN injury was showed in 619 cases without risk sign (p<0.05). In conclusion, the presence of panoramic risk signs was associated with an increased risk for IAN injury during mandibular third molar extraction, whereas the absence of risk signs was associated with a minimal risk of nerve injury.

• 보존과학회지
• /
• 제5권1호
• /
• pp.20-40
• /
• 1996

For obtaining the basic data for establishing plan on the conservation of the Gameunsa 3-story and Naweonri 5-story Pagodas located at the Kyeongju city, the characteristics of the rock and weathering phenomena have been investigated. The former consists of quartz-rlch granite containing small amount of biotite, and the latter of alkali granite with abundant perthite, These rock phases are nearly identical to the marginal phase of medium-grained hornblende-biotite granodiorite and alkali granite respectively, which are distributed around the Kyeongju city. The rock weathering may be governed mainly by chemical weathering of feldspar following physical segregation of quartz grains and pervasive moss. The feldspar easily dissolve In the solution with pH<7 to precipitate clay mineral such as a kaolinite as a secondary phase on the feldspar surface. However, the chemical weathering of feldspar may continue when the surface is washed by the rain according to removal of the reprecipitated phase. On forwarding, the weathering may be greatly Influenced by the acid rain. Exfoliation and weathering along igneous lineation resulting in exfoliating along the structural line are the characteristic weathering phenomena. Also the secondary small cracks are irregularly developed on the rocks due to different strain on places by the overall structural unbalance of the pagodas. Along these cracks, the rain water intrudes deeply into the rocks and weathering occurs intensively compared to other parts. Weathering may be artificially promoted by the grinding or sculpturing when the pagodas were made. Because it may influence on the physical properties of the rocks as well as destruct the surface of the feldspar crystals, the major constituents of the rocks, it results in providing the environment of easy chemical weathering along time. For conservation, the pagodas must be structurally balanced by compacting the soil basement and supplementing rocks on the destroyed part. On the exfoliated part it is better not to be artifically treated as using cementing material. But the cracks may be filled up by cementing material to avoid the intrusion of acidic water. To supplement the rocks on the destroyed part, it may be better to use similar rock phases from identical biotite granite and alkali granite masses around the Kyeongju city.

• 유기물자원화
• /
• 제4권2호
• /
• pp.55-62
• /
• 1996

본 연구에서는 중금속에 대한 지렁이 분변토의 흡착특성을 활성탄과 비교함으로서 중금속 함유폐수처리를 위한 경제적인 흡착제로서 활용가능성을 평가하기 위한 연구를 수행하였다. 지렁이를 이용한 퇴비화에 사용된 슬러지는 피혁슬러지와 우분슬러지를 7:3으로 혼합하여 부숙시킨 것을 사용하였다. 분변토의 물리화학적 특성을 평가하기 위한 용출실험으로부터 분변토는 약간의 pH의 완충능력과 55.1me/100g의 양이온교환능력을 가지는 것으로 평가되었다. 분변토의 중금속에 대한 흡착평형시간은 90분 이내로서 활성탄과 큰 차이가 없었으며, Pb, Cu, Cd, Cr, Zn의 제거효율은 활성탄이 각각 98%, 93%, 94%, 89%, 82%, 분변토는 95%, 90%, 88%, 80%, 66%로 평가되었다. 흡착제 양의 변화에 따른 흡착특성을 Freundlich 등온 흡착식으로 해석한 결과 1/n값은 분변토의 경우 0.28~0.74로서 활성탄의 0.29~0.56에 근접하는 결과를 얻을 수 있었으며, 이 결과로부터 분변토를 경제적인 중금속흡착제로 사용 가능한 것으로 평가되었다. 또한, 분변토의 중금속 성분별 흡착선호성향을 활성탄과 비교 분석한 결과 분변토는 Pb>Cu>Cd>Cr>Zn의 순이었으며, 활성탄은 Pb>Cd>Cu>Cr>Zn의 순이었다.

• 유기물자원화
• /
• 제20권1호
• /
• pp.61-70
• /
• 2012

본 연구에서는 하수슬러지, 돈분뇨, 음식물쓰레기 탈리액을 단독 또는 혼합 주입한 회분식 혐기성 소화를 수행하여 바이오가스 생산 및 유기물 저감 효율 비교 평가를 통해 병합소화의 타당성을 검토하였다. 타당성 검토 대상은 M시에서 발생하는 하수슬러지 178 톤/일, 돈분뇨 해양 투기량 및 축산폐수처리장 유입량 150 톤/일, 음식물쓰레기 탈리액 소각량 8톤/일이다. 유기성 폐기물 별 혐기성 소화 특성을 회분식 실험을 통해 고찰한 결과, 검토된 보조기질(돈분뇨, 음식물쓰레기 탈리액)이 메탄수율, 메탄 생산성, 유기물 제거 효율 측면에서 하수슬러지에 비해 우수한 성능을 나타내었다. 하수슬러지, 돈분뇨, 음식물쓰레기 탈리액의 병합 소화를 수행한 결과, 대상 유기성 폐기물 전량을 하수처리장 소화조로 투입하는 경우, 하수슬러지 단독 소화 대비, 5.6 배$(530\;m^{3}\;CH_{4}/d\;{\rightarrow}\;2,968\;m^{3}\;CH_{4}/d)$ 높은 메탄생산 잠재량을 보일 것으로 나타났다. 다만 소화조 유출수가 기존에 비해 1.88 배 증가하고, 유출수 내 오염물질 부하(COD, T-N, T-P)가 3.79-4.92배 증가하는 것으로 나타났다. 병합소화는 하수처리장 에너지 자립화에 큰 기여를 할 수 있으나, 적용 시 하수처리장으로의 반송 등 소화조 유출수 처리 방안의 확보 방안이 함께 마련되어야 할 것으로 사료된다.

• 대한족부족관절학회지
• /
• 제20권3호
• /
• pp.112-115
• /
• 2016

Purpose: We aimed to investigate the safety zone for Achilles tendon insertion in the posterior aspect of the calcaneus via the use of magnetic resonance imaging (MRI) when planning for insertional Achilles tendinopathy. Materials and Methods: This study included 95 patients. The MRI of midsagittal plane of the ankle joint was used to measure the proximal and distal insertion point for the Achilles tendon in the posterior aspect of the calcaneus. Patients were divided into three groups according to the proportion of the distal insertion point out of the entire calcaneal length: the proximal, middle, and distal insertion groups. Results: The mean proximal and distal insertion points for the Achilles tendon were measured as 1.05 cm (0~2.11 cm) and 2.36 cm (1.60~2.93 cm), respectively. When the posterior aspect of the calcaneus was used as the reference plane, none of the patients was in the proximal insertion group, while 75 and 20 patients were in the middle and distal insertion groups, respectively. The insertion portion was longer in the distal insertion group ($1.47{\pm}0.25cm$) than in the middle insertion group ($1.27{\pm}0.35cm$). Statistically significant differences with respect to the length of the insertion portion were observed between the two groups (p=0.008). Conclusion: Removal of more than 1 cm below the superior margin of the posterior calcaneus may be dangerous. An MRI study on the Achilles tendon of patients without hindfoot deformity or tendinopathy revealed various insertional characteristics. Preoperative MRI evaluation is safer than relying solely on the simple radiological assessment when planning for insertional Achilles tendinopathy.

• 한국초지조사료학회지
• /
• 제33권1호
• /
• pp.39-44
• /
• 2013

In Korea, wide spread use of whole cottonseed, which is primarily a GMO plant imported from foreign countries and being fed to animals as raw state, has aroused concern that it may disturb the existing ecology of the country unless dispersion of the seed is under proper control. The objective of this study was to elucidate the changes in various nutritive parameters due to heat treatment and to determine the effective condition for removing germination ability of whole cottonseed (WCS). Of the various temperatures applied (76, 78, 80, 85, $100^{\circ}C$/30 min) $85^{\circ}C$ for 30 min was confirmed to be the lowest temperature treatment which resulted in a complete removal of the germination ability of WCS. Therefore, based on the determined temperature condition ($85^{\circ}C$ 30 min) we tried to examine the changes of various nutritional parameters, including nutrient composition, in vitro digestibilities and ruminal protein degradabilities, comparing raw whole cotton seed (RWCS) and heated whole cotton seed (HWCS). Some changes in amino acid composition were observed with heat treatment of WCS, but these were regarded to originate from the variation in plant quality and seed morphology, which are usually affected by different environmental factors during the vegetation period. As for fatty acid composition, no significant differences were observed to occur during heat treatment. However, WCS heated at $85^{\circ}C$ for 30 min in a circulating oven showed a significant decrease (p<0.05) of in situ rumen degradability in both dry matter (DM) and crude protein (CP), as compared to raw WCS. Overall results obtained in the study indicate that the heating condition used in this study, which was proven to be the most appropriate and economic to remove germination ability of WCS, may also improve the nutritional value of the ruminant with regard to reducing its protein degradability within the rumen.

• 한국축산시설환경학회지
• /
• 제18권1호
• /
• pp.25-34
• /
• 2012

1. 돈사의 유형별 시간대에 따른 공기품질의 변화패턴을 알아본 결과 돈사 실내의 온 습도, 먼지농도, 실내기체의 조성 등이 주간과 야간의 편차가 크게 나타났으며, 대부분의 돈사는 주간시간대인 12:00경의 실내 환경조건이 가장 양호하였고 00:00~06:00 사이의 공기조성이 가장 불량한 것으로 나타났다. 2. 돈사의 유형별 공기품질이 양호한 곳은 임신돈사와 분만돈사였으며, 불량한 돈사는 육성돈사와 비육돈사 이었다. 공기의 품질이 양호하였던 임신돈사의 경우, 슬러리 형태로서 분과 뇨의 분리가 잘 이루어진 결과였으며, 분만돈사의 경우는 돈사당 사육두수에 비하여 포유자돈의 배설량이 적었기 때문이었다. 반면, 공기품질이 불량한 육성돈사 및 비육돈사는 분뇨배설량이 많을 뿐 아니라 분뇨의 적체시간이 긴 구조적 특성이 작용한 결과였다. 또한 분만돈사의 경우, 심야시간대인 00:00 부터 06:00 사이에 일산화탄소와 이산화탄소의 함량이 크게 증가하는 현상을 보였는데 이것은 이 시간대의 공기품질이 자돈폐사율의 증가요인이 될 수 있음을 시사한다. 3. 그러므로 돈사의 환경을 개선하려면, 실내 악취발생을 최소화할 수 있는 시설구조, 적합한 사육밀도의 조절 및 자동감지 환기 시설 등이 매우 중요한 요소라고 하겠다.

• 공업화학
• /
• 제23권5호
• /
• pp.450-455
• /
• 2012

수용액으로부터 유독한 플루오레세인 염료 성분을 제거하는데 있어서 활성탄의 활용가능성을 살펴보았다. 회분식 실험을 통해 입상 활성탄에 대한 플루오레세인 염료의 흡착특성을 초기농도, 접촉시간 및 흡착온도를 변수로 하여 조사하였다. 실험결과는 활성탄이 수용액으로부터 플루오레세인 염료를 고효율로 제거할 수 있는 것으로 나타났다. 흡착 평형관계는 298~318 K의 온도범위에서 Freundlich 등온식이 잘 적용되었다. 흡착동력학적 연구로 부터 플루오레세인 염료의 흡착공정은 유사이차속도식에 잘 맞았으며 유사이차속도상수($k_2$)는 플루오레세인 염료 초기농도가 높을수록 감소하였다. 흡착자유에너지변화${\Delta}G^0$), 엔탈피변화${\Delta}H^0$), 엔트로피변화${\Delta}S^0$)를 계산하여 본 결과, 표준자유에너지 변화량이 -17.11~-20.50 kJ/mol로 자발적인 공정임을 알았다. 엔탈피변화량은 33.2 kJ/mol로 양의 값을 나타내어 활성탄에 대한 플루오레세인 염료의 흡착이 흡열반응임을 알 수 있었다.

• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1999년도 춘계학술대회 및 발표대회 강연 및 발표논문 초록집
• /
• pp.5-5
• /
• 1999

The Principal deficiency of the existing notion about the sintering-mixtures consists in the fact that almost no attention is focused on the Phenomenon of alloy formation during sintering, its connection with dimensional changes of powder bodies, and no correct ideas on the driving force for the sintering process in the stage of establishing chemical equilibrium in a system are available as well. Another disadvantage of the classical sintering theory is an erroneous conception on the dissolution mechanism of solid in liquid. The two-particle model widely used in the literature to describe the sintering phenomenon in solid state disregards the nature of the neighbouring surrounding particles, the presence of pores between them, and the rise of so called arch effect. In this presentation, new basic scientific principles of the driving forces for the sintering process of a two-component powder body, of a diffusion mechanism of the interaction between solid and liquid phases, of stresses and deformation arising in the diffusion zone have been developed. The major driving force for sintering the mixture from components capable of forming solid solutions and intermetallic compounds is attributed to the alloy formation rather than the reduction of the free surface area until the chemical equilibrium is achieved in a system. The lecture considers a multiparticle model of the mixed powder-body and the nature of its volume changes during solid-state and liquid-phase sintering. It explains the discovered S-and V-type concentration dependencies of the change in the compact volume during solid-state sintering. It is supposed in the literature that the dissolution of solid in liquid is realised due to the removal of atoms from the surface of the solid phase into the melt and then their diffusicn transfer from the solid-liquid interface into the bulk of liquid. It has been shown in our experimental studies that the mechanism of the interaction between two components, one of them being liquid, consist in diffusion of the solvent atoms from the liquid into the solid phase until the concentration of solid solutions or an intermetallic compound in the surface layer enables them to pass into the liquid by means of melting. The lecture discusses peculimities of liquid phase formation in systems with intermediate compounds and the role of the liquid phase in bringing about the exothermic effect. At the frist stage of liquid phase sintering the diffusion of atoms from the melt into the solid causes the powder body to grow. At the second stage the diminution of particles in size as a result of their dissolution in the liquid draws their centres closer to each other and makes the compact to shrink Analytical equations were derived to describe quantitatively the porosity and volume changes of compacts as a result of alloy formation during liquid phase sinteIing. Selection criteria for an additive, its concentration and the temperature regime of sintering to control the density the structure of sintered alloys are given.

• Restorative Dentistry and Endodontics
• /
• 제22권1호
• /
• pp.358-373
• /
• 1997

Resin modified glass ionomers were introduced in 1988 to overcome the problems of moisture sensitivity and low early mechanical strength of conventional glass ionomers and to maintain their clinical advantages. The purpose of this study was to evaluate the color stability of four resin modified glass ionomers(Fuji II LC, Vitremer, Dyract and VariGlass), one resin composite material(Z-100), and one conventional glass ionomer(GC Fuji II) under several conditions. These conditions were as follows: 1) before curing, 2) after curing, 3) after polishing, 4) after 500 thermocycling, 5) after 1,000 thermocycling, 6) after 1,500 thermocycling and 7) after 2,000 thermocycling. Three specimens of each material/shade combination were made. Materials were condensed into metal mold with a diameter of 10 mm and a thickness of 2.0 mm, and were pressed between glass plates. The material was polymerized using a light polymerizing unit(Visilux II, 3M, USA). After removal of excess, the surface was polished sequentially on wet sandpapers. A reflection spectrophotometer(Model TC-6FX, Tokyo Denshoku Co., Japan) was used to determine CIELAB coordinates($L^*,a^*$ and $b^*$) of each specimen. CIE standard illumination C was used as the light source. The results were as follows : 1. In comparing different shades of same material, CIELAB color difference(${\Delta}E^*$) value was not significantly different from each other(p>0.05). 2. CIELAB color difference(${\Delta}E^*$) values between after-curing and after-polishing were ranged from 5.53 to 27.08. These values were higher than those of other condition combinations. 3. CIELAB color difference(${\Delta}E^*$) values between before-thermocycling and after-thermocycling were ranged from 1.40 to 7.81. Despite the number of thermocycling increased, CIELAB color difference(${\Delta}E^*$) value was low. 4. The color stability of resin modified glass ionomers was more stable than that of conventional glass ionomers but less stable than that of Z100.