• 한국정보디스플레이학회:학술대회논문집
• /
• 2005.07a
• /
• pp.562-566
• /
• 2005

Toshiba Matsushita Display Technology (TMD) has firstly succeeded in mass production of OCB (Optically Compensated Bend) mode liquid crystal display panels which have excellent moving picture quality almost the same as CRT. We have newly developed 32 -inch diagonal HD ($1366{\times}768\;pixels$) panels using OCB mode and low temperature p-Si TFT (LTPS) array substrates. High performance of brightness of $600cd/m^2$ and contrast ratio of 600 : 1 was obtained by using pseudo-impulse driving method to insert a black period between continuous two frames, and also by using blinking backlight method. Furthermore, moving picture response time (MPRT) 6.5ms has been obtained by optimization of black insert driving and backlight blinking, without the great sacrifices of contrast ratio and luminance.

• Steel and Composite Structures
• /
• v.2 no.6
• /
• pp.411-428
• /
• 2002

Non-linear large-displacement elasto-plastic finite element analyses are used to propose design recommendations for the eaves bracket of a cold-formed steel portal frame. Owing to the thinness of the sheet steel used for the brackets, such a structural design problem is not trivial as the brackets need to be designed against failure through buckling; without availability of the finite element method, expensive laboratory testing would therefore be required. In this paper, the finite element method is firstly used to predict the plastic moment capacity of the eaves bracket. Parametric studies are then used to propose design recommendations for the eaves bracket against two potential buckling modes of failure: (1) buckling of the stiffened free-edge into one-half sine wave, (2) local plate buckling of the exposed triangular bracket area.The results of full-scale laboratory tests on selected geometries of eaves bracket demonstrate that the proposed design recommendations are conservative. The use of the finite element method in this way exploits modern computational techniques for an otherwise difficult structural design problem.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2000.10a
• /
• pp.550-556
• /
• 2000

Three floating islands were constructed on the surface of the reservoir, each consisting of 10 16-㎡ (4${\times}$4 m) segments, made of wood frames and floats. Three species of aquatic macrophytes were planted in each island on June, 1998. Phragmites australis was considered as the suitable aquatic macrophyte for the floating islands since it maintained the most efficient root and shoot balance among the macrophytes. The net primary productivity of P. Australis was 3,604 g/㎡ based on dry weight in 1999, with uptake rates of nitrogen and phosphorus estimated at 77.4 g/㎡/yr and 5.7 g/㎡/yr, respectively. The result of water quality simulation for the floating islands showed that, through adsorption of nutrients and light screening, they could reduce the amount of phytoplankton, thereby decreasing COD concentration.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.24 no.8B
• /
• pp.1438-1443
• /
• 1999

In this paper, we propose detection methods for gradual scene changes such as dissolve, pan, and zoom. The proposal method to detect a dissolve region uses scene features based on spatial statistics of the image. The spatial statistics to define shot boundaries are derived from squared means within each local area. We also propose a method of the camera motion detection using four representative motion vectors in the background. Representative motion vectors are derived from macroblock motion vectors which are directly extracted from MPEG streams. To reduce the implementation time, we use DC sequences rather than fully decoded MPEG video. In addition, to detect the gradual scene change region precisely, we use all types of the MPEG frames(I, P, B frame). Simulation results show that the proposed detection methods perform better than existing methods.

• BMB Reports
• /
• v.55 no.3
• /
• pp.125-135
• /
• 2022

Continuously renewing the proteome, translation is exquisitely controlled by a number of dedicated factors that interact with the ribosome. The RNA helicase DDX3 belonging to the DEAD box family has emerged as one of the critical regulators of translation, the failure of which is frequently observed in a wide range of proliferative, degenerative, and infectious diseases in humans. DDX3 unwinds double-stranded RNA molecules with coupled ATP hydrolysis and thereby remodels complex RNA structures present in various protein-coding and noncoding RNAs. By interacting with specific features on messenger RNAs (mRNAs) and 18S ribosomal RNA (rRNA), DDX3 facilitates translation, while repressing it under certain conditions. We review recent findings underlying these properties of DDX3 in diverse modes of translation, such as cap-dependent and cap-independent translation initiation, usage of upstream open reading frames, and stress-induced ribonucleoprotein granule formation. We further discuss how disease-associated DDX3 variants alter the translation landscape in the cell.

• Computational Structural Engineering : An International Journal
• /
• v.1 no.2
• /
• pp.137-137
• /
• 2001

The reliability/redundancy of structural system has become a serious concern among engineers and researchers after structural failures in Northridge and Kobe earthquakes. The reliability/redundancy factor, ρ, in current codes considers only member force and floor area and has received much criticism from dissatisfied engineers. Within a reliability framework. the redundancy is investigated for dual systems of primary shear walls and secondary moment frames and steel moment frame systems. Probabilistic performance analyses are carried out baled on nonlinear responses under SAC ground motion. The effects of structural configuration, ductilily capacity, 3-D motion, and uncertainty of demand verses capacity are investigated. Important redundancy-contributing factors are identified and a uniform-risk redundancy factor is developed for design. The result are compared with the p factor and its inconsistency is pointed out.

• Steel and Composite Structures
• /
• v.50 no.6
• /
• pp.643-658
• /
• 2024

The main aim of this study is to quantify the code seismic design coefficients of the RCS system, which consisted of reinforced concrete columns and steel beams, based on the FEMA P-695 methodology. The underlying intention is to evaluate the seismic performance of the RCS system at the system level rather than the connection level. A set of 24 archetype buildings with a various number of stories, beam span lengths, gravity load levels, and seismic load levels are selected and designed based on the prevailing code requirements. Nonlinear analytical models are developed and validated by experimental tests. The pushover and response history dynamic analyses are conducted to evaluate the required data in the performance quantification process. The results show that the design coefficients suggested by the code are acceptable. However, the level of conservatism is very high. Thus, it is possible to use a larger R-factor in the design process or make some relaxations in the design requirements related to this structural system.

• Journal of radiological science and technology
• /
• v.36 no.4
• /
• pp.291-297
• /
• 2013

This study is aimed to evaluate the effect of $T_{1/2}$ upon count rates in the analysis of dynamic scan using NaI (Tl) scintillation camera, and suggest a new quality control method with this effects. We producted a point source with $^{99m}TcO_4^-$ of 18.5 to 185 MBq in the 2 mL syringes, and acquired 30 frames of dynamic images with 10 to 60 seconds each using Infinia gamma camera (GE, USA). In the second experiment, 90 frames of dynamic images were acquired from 74 MBq point source by 5 gamma cameras (Infinia 2, Forte 2, Argus 1). There were not significant differences in average count rates of the sources with 18.5 to 92.5 MBq in the analysis of 10 to 60 seconds/frame with 10 seconds interval in the first experiment (p>0.05). But there were significantly low average count rates with the sources over 111 MBq activity at 60 seconds/frame (p<0.01). According to the second analysis results of linear regression by count rates of 5 gamma cameras those were acquired during 90 minutes, counting efficiency of fourth gamma camera was most low as 0.0064%, and gradient and coefficient of variation was high as 0.0042 and 0.229 each. We could not find abnormal fluctuation in $x^2$ test with count rates (p>0.02), and we could find the homogeneity of variance in Levene's F-test among the gamma cameras (p>0.05). At the correlation analysis, there was only correlation between counting efficiency and gradient as significant negative correlation (r=-0.90, p<0.05). Lastly, according to the results of calculation of $T_{1/2}$ error from change of gradient with -0.25% to +0.25%, if $T_{1/2}$ is relatively long, or gradient is high, the error increase relationally. When estimate the value of 4th camera which has highest gradient from the above mentioned result, we could not see $T_{1/2}$ error within 60 minutes at that value. In conclusion, it is necessary for the scintillation gamma camera in medical field to manage hard for the quality of radiation measurement. Especially, we found a tendency that count rate changes over time at this study, and we proved that it can effect $T_{1/2}$. And also, there is need of appropriate phantoms and the method of quality management like this study, because there are not any advice or limitation degrees for domestic medical purpose scintillation camera.

• Journal of East-West Nursing Research
• /
• v.24 no.1
• /
• pp.28-35
• /
• 2018

Purpose: The purpose of this study was to investigate the image of nurses portrayed in the internet photographs. Methods: A total of 184 photographs were extracted through the Google portal site using a search term, 'nurse'. Based on the findings of previous studies, a content analysis was conducted with three categories: appearance characteristics, photographic scene, and photographic source. Results: The result revealed that in the photos of appearance characteristics, 237 (98.3%) out of 241 nurses had a normal or less frame, 235 (97.5%) were well-groomed, and 103 (42.7%) wore pants. In addition, 51 (21.2%) wore a cap (21.2%) and 12.0% were male. In the photographic scene, 69 (37.5%) portrayed nursing activities and 36 (19.6%) suggestiveness. In the suggestive photos, all of nurses were female (${\chi}^2=7.63$, p=.021) and they were more likely to have small frames (${\chi}^2=48.40$, p<.001) and wear caps (${\chi}^2=113.54$, p<.001) and skirts (${\chi}^2=39.96$, p<.001). Conclusion: This study showed that the photographs of the nurses wearing a cap and expressing the nurse as a sexual object still appeared. There is a need for a systematic image enhancement strategy so that actual images of nurses can be projected on the internet photographs.

• The Korean Journal of Mycology
• /
• v.25 no.3 s.82
• /
• pp.167-175
• /
• 1997

The PCR fragments of two distinct chitin synthase genes, PdCHSl and PdCHS2, were cloned from Penicillium diversum KCTC 6786. The nucleotide sequences of PdCHSl and PdCHS2 contained uninterrupted open reading frames (ORFs) of 570 bp excluding the primer sequence. The similarity analysis of the deduced amino acid sequences using BLASTP indicated that the possible evolutionary relationship between P. diversum and ascomycetous fungi. Multialignment of the deduced amino acid sequences of PdCHSs using CLASTAL W revealed that the PdCHSs fell into two different classes: PdCHSl into Class I and PdCHS2 into Class II of chitin synthase defined by Bowen et al. (1992). By Southern blot analysis, it was shown that each of the two genes is present as a single copy in the genome of P. diversum KCTC 6786.