• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.18 no.1
• /
• pp.42-63
• /
• 1992

In order to investigate the effect of nonionic surfactants on the antimicrobial activity of preservatives in the presence and absence of p.0.E(20) Sorbitan fatty acid ester commonly used in cosmetics and pharmaceutical systems, these experiments were carried out by determining Minimum Inhibitory Concentration(MIC) values and MIC values of adaptation against test organisms. And also the inactivation of the preservative against each microorganism in formula added with various concentrations of P.0.E(20) Sorbitan monostearate were measured by use of a preservative death time curve The results obtained were as fort low : 1) Nonionic surfactant inactivated Methylparaben to varying extents, but not Imidazolidinyl urea. 2) A combined preservative system was inactivated to a little extent (range of 0.16-0.20% Conc.), no adaptation was observed for the 5. aureus ATCC 6538. Imidazolidinyl urea complex combined with Methylparaben had a broad antibacterial spectrum against the Gram(.) and the Gram(-) bacteria It was found that preservatives had a synergistic effect by use of mixed form of preservatives, 3) In formula preserved with 0.2% Methylparaben containing 0.5, 1.0 and 2.0% P.0.E(20) Sorbitan monostearate, E. coli ATCC 10s36 and P. aeruginosa NCTC 10490 died quickly within in 2hr 4) However, from Fig.5, S. aereus ATCC 6538 died more slowly within increasing surfactant concentration and the D-values(Decimal reduction time) were 5.2, 8 and 14 hr. for samples containing 0.5, 1 0 and 2.0% P 0. E(20) Sorbitan monostearate, respectively. 5) In the case of Methylparaben, no adaptation for the E. coli ATCC 10536 6) All of the nonionic surfactant, p.0. E(20) Sorbitan fatty acid ester used in the experiments decreased the effectiveness of Methylparaben, but not of Imidazolidinyl urea.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.3
• /
• pp.505-509
• /
• 2001

This study was carried out to evaluate the application of food irradiation technology as a method for reducing milk allergies. Bovine $\alpha$-casein, $\beta$-casein, $textsc{k}$-casein, $\alpha$-lactalbumin(ALA), $\beta$-lactoglobulin (BLG) and serum albumin (BSA) were used as model allergens of milk proteins and the proten solution (2.0 mg/mL) with 0.01 M phosphate buffered saline (pH 7.4) was irradiated at 3, 5 and 10 kGy. Using milk-hypersensitive patients IgE (MHP-IgE), the changes of binding ability to irradiated proteins were observed by competitive indirect enzyme-linked immunosorbent assay (Ci-ELISA). Affinity of MHP-IgE to milk proteins was higher in ALA and BLG than that of other proteins. Standard curve to each non-irradiated protein could be made with MHP-IgE for quantifying milk allergens. Binding abilities of MHP-IgE to the irradiated proteins, however, decreased with different slopes of the standard curves. Sensitivity of gamma irradiation was higher in ALA and BLG than of other proteins. These results indicated that irradiation technology can be used to reduce the milk hypersensitivity.

• Korean Chemical Engineering Research
• /
• v.44 no.4
• /
• pp.350-355
• /
• 2006

Growth curves of microbes were examined to evaluate decomposition of metal-working fluids and decomposition properties of metal-working fluids were experimented using controled microbes such as E. coli and K. pnemoniae. According to the results of growth curve of microbes, the growth period depended on species of microbes, 2 h of E. coli, 3 h of K. pneumoniae, 4 h of P. aeruginosa and 3 h of P. oleovarans after incubation. The colony count of E. coli and K. pneumoniae controled to OD of 0.5 ranged from $4.4{\sim}10.0{\times}10^5CFU/mL$ and $1.8{\sim}9.5{\times}10^7CFU/mL$, respectively. The decomposition of metal-working fluids was excellently progressed in the range of pH 6~8 than below pH 4 and above pH 10. In the case of controled fluids to pH 6~8, the decomposition of the fluid containing ester group was more accelerated than that of the fluid containing ethylene glycol.

• Proceedings of the Korean Society of Agricultural Engineers Conference
• /
• 2003.10a
• /
• pp.171-174
• /
• 2003

The relationships between compression index, $C_c$, which is the slope of the e-log p curve from consolidation test, and other physical properties of remolded and undisturbed clays were examined. After examined, it is clarified that the $C_c$-initial porosity, $n_0$, relationship is better correlation than the $C_c$-other factors relationship, and a new $C_c$ equations using $n_0$ for remolded and undisturbed clays were suggested.

• The Korean Journal of Malacology
• /
• v.29 no.2
• /
• pp.121-127
• /
• 2013

In this study, growth-line analysis was carried out on the hard clam (Meretrix petechialis) collected from the Neolithic shell middens in Daejuk-ri, Seosan, Korea, to reconstruct palaeoenvironment. Growth increments of 206 specimens of the clam were examined. The ages of the specimens were determined from the rings on the shells. The relationship between shell length and ring radius in each ring group was expressed as a regression line, indicating a correspondence in each ring formation. Growth pattern of the midden specimens was compared to that of modern ones collected from Gimje, Jeonbuk. Growth curves for shell length fitted to the von Berta anffy's growth curve were expressed respectively as follows: $SL_t=102.9025[1-e^{-0.18657(t+1.0906)}]$ in the shell midden specimens, $SL_t=104.2583[1-e^{-0.2277(t+0.7499)}]$ in the modern ones. The relationship between shell length (SL; mm) and shell height (SH; mm) was expressed by the following equations: SH = 0.7791 SL + 3.6636 ($R^2$ = 0.946) in the midden specimens, SH = 0.8103 SL + 0.5145 ($R^2$ = 0.991) in the modern ones. The results of the tests regarding the differences between regression coefficients and elevations of growth curves of these two populations demonstrate that the slopes were not significantly different (p < 0.05), but the elevations were (p > 0.05). However, overall growth curves of the midden and modern populations were not significantly different, indicating that shell growth environments of the two areas are similar. Therefore, it is likely that sea temperature near the midden area could be similar to that of present Gimje area, and thus temperature during the period of the midden formation could be higher than presently known.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1997.04a
• /
• pp.338-341
• /
• 1997

According to reports, it is impossible to make Ohmic Contact with high resistivity p type CdTe or CdZnTe semiconductor theoretically. But it is in need of making Ohmic Contact to fabricate semiconductor radiation detector By electroless deposition method using gold chloride solution, we made Ohmic Contact of Au and p-Cd$_{80}$Zn$_{20}$Te which grown by High Presure Bridgman Method in Aurora Technologies Corporation. We investigated the interface with Rutherford Backscattering Spectrometry and Auger electron spectroscopy. And we evaluated the degree of Ohmic Contact for the Au/CdZnTe interface by the I/V characteristic curve. As a result, we concluded that it showed excellent Ohmic Contact property by tunneling mechanism through the interface.e.

• Proceedings of the Korean Society of Soil and Groundwater Environment Conference
• /
• 2006.04a
• /
• pp.216-219
• /
• 2006

Water retention curve (WRC), one of soil hydraulic properties, is often approximated by property-transfer models (PTMs). Using the PTMs, we can estimate the WRCs from other physical properties such as particle-size distribution (PSD). The objective of this work was to investigate the performance of two PTMs with different origins for numerical simulations on transport of Benzo[a]pyrene in a soil. To do this, we chose both PTMs with different origins, i.e., (1) the lognormal distribution model (L anti NL models), and (2) the modified $Kov\'{a}cs$ model (MK model). The MK model showed tile worse performance in estimation of the WRCs. When transport of B[a]P was simulated, the MK model predicted to move farther than the L and NL models did, indicating that transport of B[a]P in a soil can be greatly influenced by the choice of PTMs.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.71-74
• /
• 2000

Pt/Pb$TiO_3$/$SrTiO_3$/p-Si films were prepared by metallo-organic solution deposition(M0SD) method and investigated its structure and ferroelectric properties. Crystallinity of specimen as a funtions of post annealing temperature and the thickness of $SrTiO_3$(STO) buffer layer was studied using XRD and AFM. Based on C-V and P-E curve, $PbTiO_3$(PTO) capacitors showed good ferroelectric hysteresis arising from the polarization switching properties. When the thickness of ST0 buffer layer between PTO and Si substrate was 260 nrn and the post annealing temperature was $650^{\circ}C$, it was showed that production of the pyrochlore phase due to interdiffusion of Si into FTO was prevented. The dielectric constant of FTO thin films calculated from a maximum Cma in the accumulation region was 180 and the dielectric loss was 0.30 at 100 kHz frequency. The memory window in the C-V curve is 1.6V at a gate voltage of 5V.

• Journal of the Korean Geotechnical Society
• /
• v.23 no.6
• /
• pp.37-51
• /
• 2007

In this study, pile load tests have been carried out to develop new P-y curves and then, to investigate the effects of pile rigidities on laterally loaded offshore drilled shafts in Incheon marine clay. This paper consists mainly of two parts: the first part, performance of a series of lateral load tests on small- and full-scale piles under one- and two-way loadings and the second part, comparison between the measured and predicted results by using O'Neill's and Matlock's clay models. Based on the results obtained, it is shown that relatively good agreements in bending moments and lateral displacements were obtained between the measured results using calculated P-y curves and predicted ones by O'Neill's and Matlock's clay models. The cases were considered with varying rigidity factors based on pile diameter, length and subgrade soil reaction. Through comparisons, it is found that soil P-y curve influences highly the behavior of flexible pile rather than that of rigid pile.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.7 no.1
• /
• pp.70-75
• /
• 1997

An improved technique based upon an electron beam evaporation system has been developed to prepare cubic thin films In crystalline semiconductors. Zinc blonde CdSe epilayers were grown on GaAs(100) substrate by an e-beam evaporation method. The lattice parameter obtained from (400) reflection is $6.077\AA$, which is in excellent agreement with the value reported in the literature for zinc blonde CdSe. The orientation of the as-grown CdSe epilayer is determined by electron channeling patterns. The crystallinity of epitaxial CdSe layers were investigated on the double crystal X-ray rocking curve. The carrier concentration and mobility of epilayers deduced by Hall effect measurement are about $10^{18}{\textrm}{cm}^{-3}$, $10^2\textrm{cm}^2/V{\cdot}sec$ at room temperature, respectively. The photocurrent spectrum peak of the epilayer at 30 K exhibits a sharp change at 1.746 eV due to the free exciton of cubic CdSe.