• 한국식품과학회지
• /
• 제36권5호
• /
• pp.823-827
• /
• 2004

본 연구에서는 식중독 유발세균에 대한 항균활성이 우수한 천연 항균성 물질을 검색하기 위해 예로부터 민간과 한방에서 널리 이용되어 온 지치를 각종 유기용매로 추출하여 식중독 유발세균에 대한 항균활성을 조사해 보았다. 지치를 methanol로 추출한 후, petroleum ether, chloroform, ethly acetate를 이용하여 실온에서 각각 용매별로 계통 분획하고, 열수추출물을 얻은 후, 9종의 식중독 유발세균(S. aureus, B. cereus, Sal. enteritidis, S. flexneri, E. coli, Sal. typhimurium, S. dysenteriae, P. aeruginosa, S. sonnei)에 대하여 항균효과를 조사하였다. 지치 추출물의 농도별 항균 활성 검색에서는 지치의 ethyl acetate 추출물이 가장 큰 항균 효과를 보였으며 S. aureus와 S. dysenteriae가 가장 민감하게 반응하는 균주였다. 지치의 ethyl acetate 추출물과 산두근의 ethyl acetate 추출물을 혼합하여 항균력을 측정해 본 결과 두 추출물을 섞어 첨가했을 경우가 단독으로 사용했을 시 보다 상승효과를 나타내었다. 또한 지치의 ethyl acetate 추출물이 식중독 유발세균의 성장에 미치는 효과를 검정하기 위해 S. aureus 및 S. dysenteriae의 배양액에 지치의 ethyl acetate 추출물을 각각 4,000ppm 농도로 첨가했을 시, S. aureus의 생육이 48시간 이상까지 억제됨을 관찰할 수 있었고, S. dysenteriae의 생육도 12시간까지 지연시킬 수 있었다.

• Journal of Magnetics
• /
• 제21권2호
• /
• pp.286-292
• /
• 2016

This study evaluates the change of computer tomography (CT) number in the case of the metal artifact reduction (MAR) algorithm, using the phantom. The images were obtained from dual CT using a gammex 467 tissue characterization phantom, which is similar to human tissues. The test method was performed by dividing pre and post MAR algorithm and measured CT values of nonmagnetic materials within the phantom. In addition, the changes of CT values for each material were compared and analyzed after measuring CT values up to 140 keV, using the spectral HU curve followed by CT scan. As a result, in the cases of N rod (trabecular bone) and E rod (trabecular bone), the CT numbers decreased as keV increasing but were constant above 90 keV. In the cases of I rod (dense bone) and K rod (dense bone), the CT numbers also decreased as keV increased but were uniform above 90 keV. The CT numbers from 40 keV to 140 keV were consistent in the cases of J rod (liver), D rod (liver), L rod (muscle), and F rod (muscle). For A rod (adipose), G rod (adipose), B rod (breast) and O rod (breast), the CT numbers increased as keV increased but were constant after 90 keV. The CT numbers from 40 keV to 140 keV were consistent in the cases of C rod (lung (exhale)), P rod (lung (exhale)), M rod (lung (inhale)) and H rod (lung (exhale)). Conclusively, because dual CT exhibits no changes in image quality and is able to analyze nonmagnetic materials by measuring the CT values of various materials, it will be used in the future as a useful tool for the diagnosis of lesions.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2000년도 추계학술발표회 초록집
• /
• pp.1-2
• /
• 2000

In chip plating, several parameters must be taken into consideration. Current density, solution concentration, pH, solution temperature, components volume, chip and media ratio, barrel geometrical shape were most likely found to have an effect to the process yields. The 3 types of barrels utilized in chip plating industry are the onventional rotating barrel, vibrational barrel(vibarrel), and the centrifugal type. Conventional rotating barrel is a close type and is commonly used. The components inside the barrel are circulated by the barrel's rotation at a horizontal axis. Process yield has known to have higher thickness deviation. The vibrational barrel is an open type which offers a wide exposure to electrolyte resulting to a stable thickness deviation. It rotates in a vertical axis coupled with multi-vibration action to facilitate mixed up and easy transportation of components. The centrifugal barrel has its plated work centrifugally compacted against the cathode ring for superior electrical contact with simultaneous rotary motion. This experiment has determined the effect of barrel vibration intensity to the plating thickness distribution. The procedures carried out in the experiment involved the overall plating process., cleaning, rinse, Nickel plating, Tin-Lead plating. Plating time was adjusted to meet the required specification. All other parameters were maintained constant. Two trials were performed to confirm the consistency of the result. The thickness data of the experiment conducted showed thatbthe average mean value obtained from higher vibrational intensity is nearer to the standard mean. The distribution curve shown has a narrower specification limits and it has a reduced variation around the target value. Generally, intensity control in vi-barrel facilitates mixed up and easy transportation of components. However, it is desirable to maintain an optimum vibration intensity to prevent solution intrusion into the chips' internal electrode. A cathodic reaction can occur in the interface of the external and internal electrode. 2H20 + e $\rightarrow$M/TEX> 20H + H2.. Hydrogen can penetrate into the body and create pressure which can cause cracks. At high intensity, the chip's motion becomes stronger, its contact between each other is delayed and so plating action is being controlled. However, the strong impact created by its collision can damage the external electrode's structure there by resulting to bad plating condition.

• 자원ㆍ환경경제연구
• /
• 제20권4호
• /
• pp.761-796
• /
• 2011

본 연구는 발전부문에서 에너지 정책의 목표인 에너지 안보와 기후변화 대책 간의 상호보완성을 고려하면서 최저 비용을 기준으로 도출된 발전 구성비를 나타내었다. 에너지 안보의 수준을 측정하기 위해 에너지 안보 가격지수를 도입하여 화석연료의 공급 집중도에서 비롯된 안보 위협을 평가하였다. CSC 방법론의 적용을 통해 원자력과 육상풍력이 석탄가스화 복합발전 및 미분탄 화력발전을 대체하는 경우가 비용효율적인 대체안으로 나타났으며, 잠재적인 탄소 감축 가능량 및 안보 개선폭을 확인하였다. 또한 이러한 대체안이 탄소 감축뿐만 아니라 에너지 안보의 개선을 달성하는 상호보완성을 확인하였다. 추가적인 에너지 안보의 개선을 위해서는 화석연료의 해외자원개발을 통한 에너지 자급률을 제고하는 것이 최선의 대안으로 나타났으며, 이를 기반으로 2020년의 특정 목표치를 달성하기 위해 최저 비용을 나타내는 발전구성비를 도출하였다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2009년도 제38회 동계학술대회 초록집
• /
• pp.174-174
• /
• 2010

Gallium Nitride(GaN) attracts great attention due to their wide band gap energy (3.4eV), high thermal stability to the solid state lighting devices like LED, Laser diode, UV photo detector, spintronic devices, solar cells, sensors etc. Recently, researchers are interested in synthesis of polycrystalline and amorphous GaN which has also attracted towards optoelectronic device applications significantly. One of the alternatives to deposit GaN at low temperature is to use Single Source Molecular Percursor (SSP) which provides preformed Ga-N bonding. Moreover, our group succeeds in hybridization of SSP synthesized GaN with Single wall carbon nanotube which could be applicable in field emitting devices, hybrid LEDs and sensors. In this work, the GaN thin films were deposited on c-axis oriented sapphire substrate by MBE (Molecular Beam Epitaxy) using novel single source precursor of dimethyl gallium azido-tert-butylamine($Me_2Ga(N_3)NH_2C(CH_3)_3$) with additional source of ammonia. The surface morphology, structural and optical properties of GaN thin films were analyzed for the deposition in the temperature range of $600^{\circ}C$ to $750^{\circ}C$. Electrical properties of deposited thin films were carried out by four point probe technique and home made Hall effect measurement. The effect of ammonia on the crystallinity, microstructure and optical properties of as-deposited thin films are discussed briefly. The crystalline quality of GaN thin film was improved with substrate temperature as indicated by XRD rocking curve measurement. Photoluminescence measurement shows broad emission around 350nm-650nm which could be related to impurities or defects.

• 한국의상디자인학회지
• /
• 제23권4호
• /
• pp.57-71
• /
• 2021

The purpose of the study is to derive an appropriate knitting method that can increase the appearance, wearability, and functionality through empirical research on the sleeve height knitting ratio of seamless knit wear. The study was conducted by producing seven types of experiment clothes according to knitting ratio to examine the characteristics according to the body armhole and sleeve height ratio. Specifically, after fit evaluatins, variance analysis (ANOVA) was performed to analyze the results of the evaluation, and the evaluated contents were converted into data. Among them, the items with significant results were intensively studied using the Duncan-test. The result showed that the height and the width of the sleeves vary depending on the knitting ratio. Test sweater A was the highest at 16cm, followed by test sweater B, test sweater C, test sweater D, test sweater E, test sweater F, and test sweater G at 4cm. The 1:1 ratio of test sweater A, was the highest, which is knitted in the same course as the body. The larger the difference in the ratio of body and sleeve, the lower the height of the sleeves. As a result of the appearance sensory evaluation, a significant difference was confirmed in the result values (p<0.001) from all items on the front, side, and rear. Specifically, the appearance of the test sweater B(2:4:2) on the front and test sweater C(2:4:3) on the side and rear side was the best. When the sleeves height is properly set, the ratio of the arm line to fit the design with a natural curve is analyzed as a very important factor. The results of this study are expected to be of practical use in product development and production that can increase the feeling when wearing and design satisfaction.

• Journal of Veterinary Science
• /
• 제22권5호
• /
• pp.47.1-47.10
• /
• 2021

Background: Due to multiple similarities in the structure and physiology of human and pig skin, the pig model is extremely useful for biological drug testing after subcutaneous administration. Knowledge of the differences between subcutaneous injection sites could have a significant impact on the absorption phase and pharmacokinetic profiles of biological drugs. Objectives: This study aimed to analyze the impact of administration site on pharmacokinetics and selected biochemical and hematological parameters after a single subcutaneous administration of ustekinumab in pigs. Drug concentrations in blood plasma were analyzed by enzyme-linked immunosorbent assay. Pharmacokinetic analyses were performed based on raw data using Phoenix WinNonlin 8.1 software and ThothPro v 4.1. Methods: The study included 12 healthy, female, large white piglets. Each group received a single dose of ustekinumab given as a 1 mg/kg subcutaneous injection into the internal part of the inguinal fold or the external part of the inguinal fold. Results: The differences in absorption rate between the internal and external parts of the inguinal fold were not significant. However, the time of maximal concentration, clearance, area under the curve calculated between zero and mean residence time and mean residence time between groups were substantially different (p > 0.05). The relative bioavailability after administration of ustekinumab into the external part of the inguinal fold was 40.36% lower than after administration of ustekinumab into the internal part of the inguinal fold. Conclusions: Healthy breeding pigs are a relevant model to study the pharmacokinetic profile of subcutaneously administered ustekinumab.

• Clinical and Experimental Pediatrics
• /
• 제51권3호
• /
• pp.323-328
• /
• 2008

목 적 : 천식은 하부기도의 만성 염증으로 정의될 수 있으며, 기관지과민성은 천식의 병태생리적인 특징이다. 하부기도를 직접적으로 평가할 수는 없지만 최대호기중간유량(forced expiratory flow between 25 and 75 percent, $FEF_{25-75}$)이 하부기도의 직경을 비교적 잘 반영하는 것으로 알려져 있다. 본 연구에서는 1초간호기량(forced expiratory volume in 1 second, $FEV_1$)과 $FEF_{25-75}$를 이용하여 얻어진 이들의 차이(difference between $FEV_1$ and $FEF_{25-75}$, DFF)와 비(ratio between $FEV_1$ and $FEF_{25-75}$, RFF)를 분석하여 기관지과민성과의 연관성을 알아보고자 하였다. 방 법 : 만 6세에서 15세 사이의 583명을 대상으로 하였다. 전체 대상자에서 폐기능 검사, 메타콜린 흡입 유발시험을 시행하였고, 혈액 내 호산구수, 혈청 총 IgE 농도, 혈청 ECP 농도를 측정하였다. 메타콜린 흡입 유발시험으로 얻어진 $PC_{20}$을 기준으로 기관지과민성 양성군($PC_{20}$>16 mg/mL)과 음성군($PC_{20}=16mg/mL$)을 정의하였으며, 그 중증도에 따라 4군으로(Group 1: <1 mg/mL; Group 2: 1-4 mg/mL; Group 3: 4-16 mg/mL; Group 4: >16 mg/mL, by American Thoracic Society, 1999) 분류하여 분석하였다. 결 과 : DFF는 기관지과민성 양성군에서 4.0 (-6.0-13.0), 음성군에서 -5 (-18.0-6.0)로 양성군에서 음성군에 비해 유의하게 높게 나타났다 (P<.001). RFF도 기관지과민성 양성군에서 1.07 (0.93-1.21), 음성군에서 0.95 (0.84-1.07)로 양성군에시 음성군과 비교하여 의미있게 높았다(P<.001). 또한 기관지과민성 중증도에 따라 나눈 4군 사이에서도 DFF (P<.001)와 RFF (P<.001) 모두 유의한 차이를 나타내었다. $PC_{20}$은 DFF ($\gamma$=0.337, P< .001) 및 RFF ($\gamma$=0.337, P<.001)와 의미있는 음의 상관 관계를 보였다. 결 론 : $FEF_{25-75}$를 이용하여 얻어진 DFF와 RFF는 기관지과민성과 밀접한 연관성을 보였고 이를 반영하는 지표가 될 수 있는 가능성을 보여주었다.

• 설비공학논문집
• /
• 제9권2호
• /
• pp.171-179
• /
• 1997

During the day time in summer, peak of air conditing load, and electric power management system lies under overloaded condition. The reason is the enlarged peak load value of electric power caused by increased air-cooling load in summer. To prevent load concentration during day time and overloaded condition of power management system, some energy storage methods are suggested. One of these methods is ice storage system. Water has some good properties as P.C.M.(Phase Chang Material) : Its melting point is the range of required operation temperature. It has large specific latent heat and is chemically stable compared to other organic or inorganic substances. It is cheap and easy to treat. This study represents experimental results of heat transfer characteristics of P.C.M. under the outward melting process in a vertical cylinder. We experimented with twelve combinations of conditions, i.e., three different inlet temperatures($7^{\circ}C,\;4^{\circ}C\;and\;1^{\circ}C$), two working fluid directions(upward and downward), and two aspect ratios, H/R(4 and 2). At the inlet temperature of $7^{\circ}C$ and $4^{\circ}C$, there was temperature stagnation region where the temperature of P.C.M. remains constant at $4^{\circ}C$ regardless of aspect ratio and direction of working fluid. This temperature stagnation occurs as the water, at its maximum density, flows down to the lower region. The phase change interface formed bell-shaped curve as the melting process continued. With a new set of conditions(4H/R, inlet temperature $4^{\circ}C$ and $1^{\circ}C$, downward/upwerd inlet direction), the movement of phase change interface was faster when the working flued inlet direction was downward. With the same set of conditions, melting rate and total melting energy were larger when the working fluid inlet direction was downward. The results were reversed when the other sets of conditions were applied.

• Journal of Breast Cancer
• /
• 제21권4호
• /
• pp.363-370
• /
• 2018

Purpose: Breast cancer is the most commonly occurring cancer among women worldwide, and therefore, improved approaches for its early detection are urgently needed. As microRNAs (miRNAs) are increasingly recognized as critical regulators in tumorigenesis and possess excellent stability in plasma, this study focused on using miRNAs to develop a method for identifying noninvasive biomarkers. Methods: To discover critical candidates, differential expression analysis was performed on tissue-originated miRNA profiles of 409 early breast cancer patients and 87 healthy controls from The Cancer Genome Atlas database. We selected candidates from the differentially expressed miRNAs and then evaluated every possible molecular signature formed by the candidates. The best signature was validated in independent serum samples from 113 early breast cancer patients and 47 healthy controls using reverse transcription quantitative real-time polymerase chain reaction. Results: The miRNA candidates in our method were revealed to be associated with breast cancer according to previous studies and showed potential as useful biomarkers. When validated in independent serum samples, the area under curve of the final miRNA signature (miR-21-3p, miR-21-5p, and miR-99a-5p) was 0.895. Diagnostic sensitivity and specificity were 97.9% and 73.5%, respectively. Conclusion: The present study established a novel and effective method to identify biomarkers for early breast cancer. And the method, is also suitable for other cancer types. Furthermore, a combination of three miRNAs was identified as a prospective biomarker for breast cancer early detection.