• Journal of the Korean Arthroscopy Society
• /
• v.5 no.1
• /
• pp.22-26
• /
• 2001

Purpose : To confirm the efficacy of arthroscopic synovectomy fur the pigmented villonodular synovitis in the knee. Materials and Methods : Between October 1996 and February 2000, the arthroscopic synovectomy had been performed in six patients(six knee joints), whose diagnoses were confirmed by pathologist. All patients complained of painful swelling in involved knee and four of the six patients had trauma history. There were three male and three female patients. Average age was 35.8 years ranging from 16 to 67 years. Follow up period was average 22.7 months(range, $13\~53$ months). Results : According to arthroscopic findings, there were three localized forms and three diffuse forms. At their last follow-up examinations, all patients had improvement in pain, swelling and range of motion and there was no evidence of recurrence. Conclusion : Complete arthroscopic excision is the definitive treatment for localized pigmented villonodular synovitis and meticulous arthroscopic excision through all portals including posterior portal can be considered as a valid alternative to traditional open synovectomy for the patients with diffuse pigmented villonodular synovitis.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.28 no.1
• /
• pp.23-30
• /
• 1995

This study was undertaken to clarify the effects of electrical stimulation on physicochemical and rheological properties of the plaice (Paralichthys olivaceus) muscle at early period after death. The plaices were electrically stimulated in seawater bath (110V/60Hz) for 15sec., 35sec., and 60sec. and killed instantly with spiking at the head. Killed samples were stored at $5^{\circ}C$, and the changes in rigor index, ATP breakdown, lactate accumulation, and breaking strength of muscle through storage were investigated. Electrical stimulation effectively accelerated rigor-mortis, lactate accumulation , and ATP breakdown. As the time of electrical stimulation was lengthened, the onset of rigor-mortis of all samples were accelerated Just after killing, and the amount of lactate was rapidly increased, But, significant differences were not observed in variance of rigor-mortis and lactate concentration. Electrically stimulated plaices showed decreasing in ATP to $4.58{\mu}mole/g$ for 15sec., $4.13{\mu}mole/g$ for 35sec., and $2.39{\mu}mole/g$ for 60sec. samples as compared with $5.5{\mu}mole/g$ of unstimulated samples. As the time of electrical stimulation was lengthened, ATP in samples were decomposed more rapidly. The rate constant of ATP breakdown were $0.244hr^{-1}$ for 15sec., $0.358hr^{-1}$ for 35sec., and $0.479hr^{-1}$ for 60sec.. The level of breaking strength in muscle of the plaice was $1050.30\pm50.23g$ immediately after killing. Values of breaking strength in samples electrically stimulated for 35sec. increased rapidly just after killing among all samples. However, the breaking strength was not increased through the whole storage time in samples stimulated for 60sec.. The value and time roaching to the maximum breaking strength for each samples stimulated electrically for 15, 35 and 60 second were $1264.43\pm35.76g$ and 2hr, $1357.68\pm22.50g$ and Ohr, and $1012.18\pm57.36g$ and Ohr. Breaking strength in all samples electrically stimulated decreased significantly (P<0.05) after reaching the maximum values.

• Clinics in Shoulder and Elbow
• /
• v.15 no.2
• /
• pp.123-129
• /
• 2012

Objective: To evaluate if acromial locking in hook plate is necessary for surgical treatment of acromioclavicular dislocation by compare Wolter plate and AO hook plate. Methods: Seventy one patients who have Rockwood type III to V acromioclavicular joint dislocation treated with AO hook plate and Wolter plate were involved. Among them, 39 patients were treated with Wolter hook plate and 32 patients with AO hook plate. The Constant-Murley score and the range of motion of shoulder joint were measured on postoperative 1st ,$3^{rd}$, $6^{th}$ and $12^{th}$ months, and the radiological complications involving plate and bone were investigated. Results: Constant-Murley score of postoperative one year were $83.2{\pm}6.8$ in AO hook plate group and $85.2{\pm}5.3$ in Wolter plate group without statistical difference (p<0.05). Faster recover of forward elevation and external rotation were examined in Wolter plate group at first and third months after surgery than those of AO hook plate group, but there were no significant difference between after six months or later after surgery. Four cases of loosen or broken screws and one case of pull-out of plate were found in Wolter plate group. Seven cases of subacromial bony erosion and one periprosthetic fracture were found in AO hook plate group. Conclusion: Although clinical outcomes of both two methods were same, no matter if acromial locking system was or not. More radiological complication of plate and bone were found in AO hook plate than that of Wolter plate. However also had disadvantage like larger incision during surgery.

• Journal of Applied Biological Chemistry
• /
• v.52 no.4
• /
• pp.180-186
• /
• 2009

Whole plants of Vitex rotundifolia were extracted for 2 days with methylene chloride ($CH_2Cl_2$) followed by extraction of the residue for an additional 2 days. The same procedure was also applied using methanol (MeOH). The two crude extracts were combined and partitioned between $CH_2Cl_2$ and $H_2O$. The organic layer was further partitioned between n-hexane and 85% aq. MeOH, and the aqueous layer was also further fractionated with n-BuOH and $H_2O$, successively. From the 85% aq. MeOH fraction, one compound was isolated through the repeated HPLC. According to the results of physicochemical data including NMR and MS, the chemical structure of the compound was determined as artemetin (1). The antiproliferative effects of the crude extracts, fractions, and compound against HT1080, AGS, MCF-7 and HT-29 human cancer cells were compared with the control by using MTT assay. In the comparative analysis, the 85% aq. MeOH fraction exhibited the strongest antiproliferative effects on human cancer cell lines in a dose-dependent manner (p<0.05). In addition, exposure of compound 1 isolated from 85% aq. MeOH fraction led to strong antiproliferative effect in HT1080 cancer cell lines. These results suggest that the extracts and compound isolated from V. rotundifolia may be used as potential chemopreventive and chemotherapeutic agents.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.21 no.3
• /
• pp.104-120
• /
• 1979

I. Title of the Study Studies on the Development of Improved Subsurface Drainage Methods. -Drainage Performance of Various Subsurface Drain Materials- II. Object of the Study Studies were carried out to select the drain material having the highest performance of drainage; And to develop the water budget model which is necessary for the planning of the drainage project and the establishment of water management standards in the water-logged paddy field. III. Content and Scope of the Study 1. The experiment was carried out in the laboratory by using a sand tank model. The drainage performance of various drain materials was compared evaluated. 2. A water budget model was established. Various parameters necessary for the model were investigated by analyzing existing data and measured data from the experimental field. The adaptability of the model was evaluated by comparing the estimated values to the field data. IV. Results and Recommendations 1. A corrugated tube enveloped with gravel or mat showed the highest drainage performance among the eight materials submmitted for the experiment. 2. The drainage performance of the long cement tile(50 cm long) was higher than that of the short cement tile(25 cm long). 3. Rice bran was superior to gravel in its' drain performance. 4. No difference was shown between a grave envelope and a P.V.C. wool mat in their performance of drainage. Continues investigation is needed to clarify the envelope performance. 5. All the results described above were obtained from the laboratory tests. A field test is recommended to confirm the results obtained. 6. As a water balance model of a given soil profile, the soil moisture depletion D, could be represented as follows; $$D=\Sigma\limit_{t=1}^{n}(Et-R_{\ell}-I+W_d)..........(17)$$ 7. Among the various empirical formulae for potential evapotranspiration, Penman's formular was best fit to the data observed with the evaporation pans in Jinju area. High degree of positive correlation between Penman;s predicted data and observed data was confirmed. The regression equation was Y=1.4X-22.86, where Y represents evaporation rate from small pan, in mm/100 days, and X represents potential evapotranspiration rate estimated by Penman's formular. The coefficient of correlation was r=0.94.** 8. To estimate evapotranspiration in the field, the consumptive use coefficient, Kc, was introduced. Kc was defined by the function of the characteristics of the crop soil as follows; $Kc=Kco{\cdot}Ka+Ks..........(20)$ where, Kco, Ka ans Ks represents the crop coefficient, the soil moisture coefficient, and the correction coefficient, respectively. The value of Kco and Ka was obtained from the Fig.16 and the Fig.17, respectively. And, if $Kco{\cdot}Ka{\geq}1.0,$ then Ks=0, otherwise, Ks value was estimated by using the relation; $Ks=1-Kco{\cdot}Ka$. 9. Into type formular, $r_t=\frac{R_{24}}{24}(\frac{b}{\sqrt{t}+a})$, was the best fit one to estimate the probable rainfall intensity when daily rainfall and rainfall durations are given as input data, The coefficient a and b are shown on the Table 16. 10. Japanese type formular, $I_t=\frac{b}{\sqrt{t}+a}$, was the best fit one to estimate the probable rainfall intensity when the rainfall duration only was given. The coefficient a and b are shown on the Table 17. 11. Effective rainfall, Re, was estimated by using following relationships; Re=D, if $R-D\geq}0$, otherwise, Re=R. 12. The difference of rainfall amount from soil moisture depletion was considered as the amount of drainage required. In this case, when Wd=O, Equation 24 was used, otherwise two to three days of lag time was considered and correction was made by use of storage coefficient. 13. To evaluate the model, measured data and estimated data was compared, and relative error was computed. 5.5 percent The relative error was 5.5 percent. 14. By considering the water budget in Jinju area, it was shown that the evaporation amount was greater than the rainfall during period of October to March in next year. This was the behind reasonning that the improvement of surface drainage system is needed in Jinju area.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.27 no.4
• /
• pp.327-334
• /
• 1994

This study was undertaken to clarify the effect of killing methods on the morphological and histological changes of plaice, Paralichthys olivaceus muscle at early stage after killing. Killed samples by the three different methods were stored at $5^{\circ}$, and the changes in breaking strength of muscle, morphological observation of myofibrils and histological observation of extracellular spaces through storage were monitored. Samples killed by electrifying in sea water showed the maximum value of breakin strength immediately after killing and then it dropped significantly(p<0.05) until 2.5hrs passed. Breaking strength of samples killed by spiking at the head instantly and dipping in sea water including anesthetic rose steadily over 10hrs and 15hrs after killing, respectively. In myofibrills prepared from dorsal muscles immediately after spiking at the head instantly, A-band, H-band, I-band, and Z-line in sarcomere were clearly distinguishable each other. Due to muscle contraction by electrical stimulation, it was impossible to distinguish H-band from I-band observed in sarcomere immediately after killing for samples killed by electrifying. But, in the cases of samples killed by spiking and dipping, H-band could be observed dimly until 10hrs and 15hrs storage. No extracellular space was observed among muscle cells immediately after spiking at the head instantly. Samples killed by spiking at the head instantly and dipping in sea water including anesthetic showed extracellular spaces among all muscle cells after 15hrs and 25hrs storage, respectively. The other hand, samples killed by electrifying in sea water (110V, 30sec.) showed a few extracellular spaces immediately after killing and then it showed extracellular spaces among all muscle cells after 2.5hrs storage.

• The korean journal of orthodontics
• /
• v.38 no.6
• /
• pp.397-406
• /
• 2008

Objective: The purpose of this study was to provide clinical guidelines to indicate the best location for mini-implants as it relates to the cortical bone thickness and root proximity. Methods: CT images from 14 men and 14 women were used to evaluate the buccal interradicular cortical bone thickness and root proximity from mesial to the central incisor to the 2nd molar. Cortical bone thickness was measured at 4 different angles including $0^{\circ}$, $15^{\circ}$, $30^{\circ}$, and $45^{\circ}$. Results: There was a statistically significant difference in cortical bone thickness between the second premolar/first permanent molar site, central incisor/central incisor site, between the first/second permanent molar site and in the anterior region. A statistically significant difference in cortical bone thickness was also found when the angulation of placement was increased except for the 2 mm level from the alveolar crest. Interradicular spaces at the 1st/2nd premolar, 2nd premolar/1st permanent molar and 1st/2nd permanent molar sites are considered to be wide enough for mini-implant placement without root damage. Conclusions: Given the limits of this study, mini-implants for orthodontic anchorage may be well placed at the 4 and 6 mm level from the alveolar crest in the posterior region with a $30^{\circ}$ and $45^{\circ}$ angulation upon placement.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2010.06a
• /
• pp.375-375
• /
• 2010

CdTe as an absorber material is widely used in thin film solar cells with the heterostructure due to its almost ideal band gap energy of 1.45 eV, high photovoltaic conversion efficiency, low cost and stable performance. The deposition methods and preparation conditions for the fabrication of CdTe are very important for the achievement of high solar cell conversion efficiency. There are some rearranged reports about the deposition methods available for the preparation of CdTe thin films such as close spaced sublimation (CSS), physical vapor deposition (PVD), vacuum evaporation, vapor transport deposition (VTD), closed space vapor transport, electrodeposition, screen printing, spray pyrolysis, metalorganic chemical vapor deposition (MOCVD), and RF sputtering. The RF sputtering method for the preparation of CdTe thin films has important advantages in that the thin films can be prepared at low growth temperatures with large-area deposition suitable for mass-production. The authors reported that the optical and electrical properties of CdTe thin film were closely connected by the thickness-uniformity of the film in the previous study [1], which means that the better optical absorbance and the higher carrier concentration could be obtained in the better condition of thickness-uniformity for CdTe thin film. The thickness-uniformity could be controlled and improved by the some process parameters such as vacuum level and RF power in the sputtering process of CdTe thin films. However, there is a limitation to improve the thickness-uniformity only in the preparation process [1]. So it is necessary to introduce the external or additional method for improving the thickness-uniformity of CdTe thin film because the cell size of thin film solar cell will be enlarged. Therefore, the authors firstly applied the chemical mechanical polishing (CMP) process to improving the thickness-uniformity of CdTe thin films with a G&P POLI-450 CMP polisher [2]. CMP process is the most important process in semiconductor manufacturing processes in order to planarize the surface of the wafer even over 300 mm and to form the copper interconnects with damascene process. Some important CMP characteristics for CdTe were obtained including removal rate (RR), WIWNU%, RMS roughness, and peak-to-valley roughness [2]. With these important results, the CMP process for CdTe thin films was performed to improve the thickness-uniformity of the sputtering-deposited CdTe thin film which had the worst two thickness-uniformities of them. Some optical properties including optical transmittance and absorbance of the CdTe thin films were measured by using a UV-Visible spectrophotometer (Varian Techtron, Cary500scan) in the range of 400 - 800 nm. After CMP process, the thickness-uniformities became better than that of the best condition in the previous sputtering process of CdTe thin films. Consequently, the optical properties were directly affected by the thickness-uniformity of CdTe thin film. The absorbance of CdTe thin films was improved although the thickness of CdTe thin film was not changed.

• Journal of Magnetics
• /
• v.20 no.4
• /
• pp.381-386
• /
• 2015

The purpose of this study is to improve diagnostic efficiency of clinical study by setting up guidelines for more precise examination with a comparative analysis of signal intensity and image distortion depending on the location of X axial of object when performing magnetic resonance diffusion weighted imaging (MR DWI) examination. We arranged the self-produced phantom with a 45 mm of interval from the core of 44 regent bottles that have a 16 mm of external diameter and 55 mm of height, and were placed in 4 rows and 11 columns in an acrylic box. We also filled up water and margarine to portrait the fat. We used 3T Skyra and 18 Channel Body array coil. We also obtained the coronal image with the direction of RL (right to left) by using scan slice thinkness 3 mm, slice gap: 0mm, field of view (FOV): $450{\times}450mm^2$, repetition time (TR): 5000 ms, echo time (TE): 73/118 ms, Matrix: $126{\times}126$, slice number: 15, scan time: 9 min 45sec, number of excitations (NEX): 3, phase encoding as a diffusion-weighted imaging parameter. In order to scan, we set b-value to $0s/mm^2$, $400s/mm^2$, and $1,400s/mm^2$, and obtained T2 fat saturation image. Then we did a comparative analysis on the differences between image distortion and signal intensity depending on the location of X axial based on iso-center of patient's table. We used "Image J" as a comparative analysis programme, and used SPSS v18.0 as a statistic programme. There was not much difference between image distortion and signal intensity on fat and water from T2 fat saturation image. But, the average value depends on the location of X axial was statistically significant (p < 0.05). From DWI image, when b-value was 0 and 400, there was no significant difference up to $2^{nd}$ columns right to left from the core of patient's table, however, there was a decline in signal intensity and image distortion from the $3^{rd}$ columns and they started to decrease rapidly at the $4^{th}$ columns. When b-value was 1,400, there was not much difference between the $1^{st}$ row right to left from the core of patient's table, however, image distortion started to appear from the $2^{nd}$ columns with no change in signal intensity, the signal was getting decreased from the $3^{rd}$ columns, and both signal intensity and image distortion started to get decreased rapidly. At this moment, the reagent bottles from outside out of 11 reagent bottles were not verified from the image, and only 9 reagent bottles were verified. However, it was not possible to verify anything from the $5^{th}$ columns. But, the average value depends on the location of X axial was statistically significant. On T2 FS image, there was a significant decline in image distortion and signal intensity over 180mm from the core of patient's table. On diffusion-weighted image, there was a significant decline in image distortion and signal intensity over 90 mm, and they became unverifiable over 180 mm. Therefore, we should make an image that has a diagnostic value from examinations that are hard to locate patient's position.

• The Korean Society of Law and Medicine
• /
• v.16 no.1
• /
• pp.3-82
• /
• 2015

This paper is concerned in the theme of the liability for the breach of duty to inform(Haftungszurechnung der $Aufkl{\ddot{a}}rungspflichtverletzung$) and the malpractice of cosmetic surgery. Here, the terms, treatments for healing purposes and purely medical-technical cosmetic operations are well integrated in the category of "medical conduct(medizinische Handlung)" within the meaning of the public and administrative 'Medical Law'. In the judgment of 6. 13. 2013 Az. 2012DA94865 provides the KHGH(Korean Highest Court of Justice) to inform the patient about the prospects and risks of cosmetic surgery(Infrabrow Excision Blepharoplasty) stringent requirements, similar to the judicature of BGH(cf. BGH, Urt. v. 6. 11. 1990, Az.: VI ZR 8/90). Even in the judgment of 5. 12. 2014 Az. 2013GASO865646 the SZLG(Seoul Central Regional Court) recognizes the physician contract for 'cosmetic septoplasty' as a sort of contract for work. The medical treatment(${\ddot{a}}rztliche$ Heilbehandlung) is still regarded as a prototype of the medical activity, therefore in the meaning of the 'Civil Law(KBGB)', its term needs to be used immediately for healing purposes. The cosmetic operation, desired by a patient, differs from the healing treatment by the element of "indication" and the fact that the "healing purpose(Heilzweck)" itself is missing. In comparative context - methodically fully aware that the unreflective term transfer between different laws might contradict their legal purposes - a series of judgments BSG(BSGE 63, 83, BSGE 72, 96, BSGE, 82, 158, BSGE 93, 252 etc.) and some judgments of LSG are reviewed. In addition, also the dogmatic topic for the "legal natur of a medical treatment contract" is to reconsider by comparative introducing BGHZ 63, 306. Now in view of the current state of greater popularity of artificial cosmetic surgery still indeed is the sentences: The doctor is minister naturae, a helper of nature. A doctor promises regularly only the proper treatment of the patient, but the contractual liability for work should not be excluded in medical conditions for cosmetic surgeries altogether. "With cosmetic operations, seeking to eliminate the external deformities, the doctor may miss the medical profession entirely." - A. Laufs, Medical Law, 5th ed. P. 18.