• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.154-159
• /
• 2004

In this study, in order to perform more efficiently reliability design and integrity assessment of structural members, the relational database management program on the engineering plastics was constructed. This program contained 476 grades for 14 kinds of the engineering plastics and was developed using MS-access and MS-visualbasic. This program consists of 3 modules; search condition, probabilistic characteristics of material property, evaluation of P-S-N curve. We perform fatigue test for probabilistic durability analysis and this results input the database program to estimate P-S-N.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2010.03a
• /
• pp.390-400
• /
• 2010

BNWF(Beam on Nonlinear Winkler Foundation) method has long been adopted for lateral behavior analysis of pile foundation and widely recognized for its simplicity and accuracy up until now. However, due to lateral load tests which were done in limited conditions and theory-based input Parameter estimation, the applicbility of p-y curve has not been fully examined. Accordingly, we researched on the applicability of conventional input parameter estimation and the p-y curve to be determined by the estimation through inverse analysis based on lateral load tests.

• Asian-Australasian Journal of Animal Sciences
• /
• v.4 no.1
• /
• pp.67-71
• /
• 1991

The purpose of this study was to investigate the possibility of using the buffer index curve as a criterion of silage quality evaluation. The buffer index (or buffer capacity, $\beta$) value is the amount of 0.1N NaOH consumed in titrating from the beginning to the end of the chosen pH step. This value equals the slope of the titration curve at the chosen pH range (${\beta}={\Delta}NaOH/{\Delta}pH$). There were two patterns of buffer index curve. Poorly preserved silages had a peak at pH 5.0, whereas with well preserved silages the peaks tended to rise to the pH 3.75 or 4.00. Well preserved, wilted silages with high pH also appeared to have peak values at pH 3.75 or 4.00. There was a high positive correlationship between the concentration of lactic acid and peak value of good quality silage (r = 0.994, p < 0.01). Also a high positive correlationship (r = 0.899, p < 0.001) was found between the sums of concentration of acetic and butyric acids and the peak values of poor quality silages. The results of these experiments verified the value of the buffer index method as a criterion of silage quality evaluation.

• Korean Journal of Applied Biomechanics
• /
• v.23 no.2
• /
• pp.109-116
• /
• 2013

The purpose of this study was to provide fundamental information for the enhancement of performance through kinematic analysis of cornering according to the radius of curve course in short track speed skating. To perform this study, six skaters: three narrow radius players(N, body mass: $56.0{\pm}7.2$ kg, height: $163.7{\pm}5.1$ cm, age: $21.3{\pm}1.5$ yrs) and three wide radius players(W, body mass: $61.0{\pm}9.5$ kg, height: $169.0{\pm}4.4$ cm, age: $20.0{\pm}1.7$ yrs). Three-dimensional motion analysis was performed on the section from the forth block starting to show the change of radius to the sixth block using eight infrared cameras(sampling frequency of 100 Hz for N and W players). The time of push-off was greater for N than for W(p<.05) while the radius of center of mass was greater for W than for N(p<.05). The flexion and extension of knee and hip joint were greater for N than for W(p<.05). The external rotation of left knee joint was greater for N than for W(p<.05). Based on the findings, a small radius by increasing the range of the flexion and extension of knee and hip joint with greater external rotation of left knee joint would be related to more efficient run at curve. It is expected that these results will be useful in developing a training program for enhancing performance of short track speed skating athletes.

• Korean Journal of Soil Science and Fertilizer
• /
• v.33 no.6
• /
• pp.405-415
• /
• 2000

To determine application rate of elemental sulfur to adjust pH of alkaline soil, buffer curve method was investigated. The elemental sulfur required to control pH 8.3 to pH 6.3 by buffer curve calculation was treated in two soils of silty loam and sandy loam, and the sulfur-mixed soils were moistened with 50% of water holding capacity during incubation of 6 weeks at $30^{\circ}C$. Soil pH was lowered with incubation and reached to target point after 4 weeks of incubation, and elemental sulfur was oxidised entirely to sulfate. This means that buffer curve has the accuracy to determine sulfur application rate in alkaline soil. However it is estimated that application rate of sulfur should be carefully determined in the field scale. Excess application of elemental sulfur resulted in extremely low soil pH and caused the hinderance of lettuce growth by nutritional imbalance and ion toxicity. To simplify the determination procedure of sulfur requirement, buffer curve method by addition of 0.1N-HCl solution as unit of mL was developed, it was compared with theroutine methods which diluted $H_2SO_4$ solution and $Ca(OH)_2$ are added as cmolc per kg soil to adjust each pH step. Buffer capacities, cmolc kg $soil^{-1}$ $pH^{-1}$, calculated from two buffer curves were not significantly different. The result indicates that buffer curve method by 0.1N-HCl can be used to adjust high pH of alkaline soil.

• Asian Pacific Journal of Cancer Prevention
• /
• v.15 no.13
• /
• pp.5395-5399
• /
• 2014

Purpose: This study was designed to evaluate the outcomes of laparoscopic colorectal resection in a period of learning curve completed by surgeons with different experience and aptitudes with a view to making clear whether seniors had a better learning curve compared with juniors. Methods: From May 2010 to August 2012, the first twenty patients underwent laparoscopic colorectal resection completed by each surgeon were selected for analysis retrospectively. A total of 240 patients treated by 5 seniors and 7 juniors were divided into the senior group (n=100) and the junior group (n=140). The short-term outcomes of laparoscopic surgery of the two groups were compared. Results: The mean numbers of lymph nodes harvested were $21.2{\pm}11.0$ in the senior group and $17.3{\pm}11.5$ in the junior group (p=0.010); The mean operative times were $187.9{\pm}60.0min$ as compared to $231.3{\pm}55.7min$ (p=0.006), and blood loss values were $177.0{\pm}100.7ml$ and $234.0{\pm}185ml$, respectively (p=0.001); Conversion rate in the senior group was obviously lower than in the junior group (10.0% vs 20.7%, p=0.027) and the mean time to passing of first flatus were $3.3{\pm}0.9$ and $3.8{\pm}0.9$ days (p=0.001). For low rectal cancer, the sphincter preserving rates were 68.7% and 35.3% (p=0.027). Conclusions: Seniors could perform laparoscopic colorectal resection with relatively better oncological outcomes and quicker recovery, and seniors could master the laparoscopic skill more easily and quickly. Seniors had a better learning curve for laparoscopic colorectal cancer resection compared to juniors.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.201-206
• /
• 2003

This study is test for STS304 specimen using bending and torsion state. Rounded specimen and notched specimen including fracture surface investigation was comparatively experimented, fatigue life according to degree of surface finishing was examined. Fatigue fracture probability of notched canilever specimens were predicted by P-S-N curve, median rank and Weibull distribution. And at the relation with the rotational speed and stress, the fatigue life of the test specimen was higher at high speed than low speed If summarize STS304 torsion result of fatigue test, is as following. Fatigue life prediction was available by Weibull statistics distribution, and 50% breakdown probability correlation equation was appeared as following.

• Proceedings of the KSME Conference
• /
• 2001.06a
• /
• pp.199-204
• /
• 2001

Big accidents of flyings, vessel, subways, gas equipments, buildings and bridge happens frenquently. Therefore many people are suffering harm of property. The destruction cause of macaine components is almost accused by fatigue. This study is test for STS304 specimen using pure and cantilever bending state. Rounded specimen and notched specimen including fracture surface investigation was comparatively experimented, fatigue life according to degree of surface finishing was examined. Fatigue fracture probability of notched canilever specimens were predicted by P-S-N curve, median rank and Weibull distribution. And at the relation with the rotational speed and stress, the fatigue life of the test specimen was higher at high speed than low speed.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.9
• /
• pp.707-712
• /
• 2008

The fatigue characteristics of a material or a structure are generally derived from fatigue tests of standard specimens. However, test results of standard specimens are different from those of real structures or components. Therefore, to calculate more accurate fatigue life, the geometrical effect and surface condition must be considered by comparing test results of standard specimens with those of real structures or components. Thus the object of this paper is to evaluate the fatigue characteristics of a real waterwork pipe. Also, to evaluate fatigue characteristic based on life distribution, the statistical fatigue characteristics were analyzed by the normal distribution and related data of P-S-N curve.

• Journal of Welding and Joining
• /
• v.28 no.2
• /
• pp.91-95
• /
• 2010

Stress distribution and deformation on the CT-type(Cross Tension type) spot welded lap joint subjected to out of plane tensile load were investigated by finite element method. Using the maximum principal stresses at the nugget edge obtained by FEM analysis, evaluated the fatigue strength of the CT-type spot welded lap joints having various dimensions and materials. and also, the influence of the geometrical parameters of CT-type spot welded lap joints on stress distribution and fatigue strength must be evaluated. thus, in this paper, ${\Delta}P-N_f$ curve were obtained by fatigue tests. Using these results, ${\Delta}P-N_f$ curve were systematically rearranged in the $\Delta\sigma-N_f$ relation with the hot spot stresses at the CT-type spot welded lab joints. It was found that the proposed $\Delta\sigma-N_f$ relation could provide a more reasonable fatigue design criterion for the CT-type spot welded lap joints.