• 정보보호학회지
• /
• 제3권1호
• /
• pp.86-90
• /
• 1993

Finite field GF$(2^n)5에서 정의된 elliptic curve가 있을때 그 curve위의 어떤 point p를 k배하는 연산은 암호론에서 매우 자주 쓰여진다. 이때 optimal normal bases를 이용하여 GF$(2^n)의 element를 표현하고, 또 elliptic curve를 선택할 때 animalous curve가 되도록 한다면, 기존이 방법 보다 매우 빠르게 k P를 구할 수 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2006년도 춘계학술대회 논문집
• /
• pp.429-430
• /
• 2006

To estimate the fatigue life of flange-shaft assembly, fatigue test for flange material and bending fatigue test for flange-shaft assembly were conducted. Also, finite element analysis for flange-shaft assembly was conducted. Then, we have changed the obtained P-N curve to S-N curve using the finite element analysis results which were stress values at the location of fracture. The S-N curve of flange material itself was almost consistent with that of flange-shaft assembly, so it seems that the fatigue life of flange-shaft assembly could be estimated by using S-N curve for flange material and the stress at the location of fracture calculated by finite element methods.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 춘계학술대회논문집A
• /
• pp.217-222
• /
• 2001

For the life evaluating of notched members, it is the best way that performing the real fatigue test of structure containing notch. But this method required generally much times and costs to evaluate fatigue life. So, generally we use the modified S-N curve or several methods to predict fatigue life. In this study, crack initiation life was evaluated by fatigue testing the SAE keyhole specimen and smooth specimen made of Al 7075-T6 alloys using the constant load then obtained S-N curve of smooth specimen and P-N curve of SAE keyhole specimen. And, fatigue lives of keyhole specimen are predicted using some life prediction methods (Nominal range I method, Nominal range II method, FEM analysis) for investigating experimented results, and that were compared with experimental data. Predicted fatigue lives by FEM analysis were corresponded with experimental data between 1/3times and 3times on the whole, and predicted fatigue lives using modified S-N curve (Nominal range I method, Nominal range II method) were nonconservative compared with that of FEM analysis.

• 호남수학학술지
• /
• 제33권2호
• /
• pp.153-161
• /
• 2011

Greg([Greg]) considered that $$N_k= \sum\limits_{i=1}^k(-1)^{i+1}P_{i,k}(p)N_1^i$$ where the $P_{i,k}$'s were polynomials with positive integer coefficients. In this paper, we will give the equations for $\sum\limits{P_{i,k}$ modulo 3. Using this, if we send a information for elliptic curve to sender, we can make a new checksum method for Manchester coding in IEEE 802.3 or IEEE 802.4.

• 환경영향평가
• /
• 제22권4호
• /
• pp.319-327
• /
• 2013

This study was conducted to identify runoff characteristics of pollutants using flow duration curve(FDC) and load duration curve(LDC) in Youngbon A watershed during 2009~2011. A flow rate and pollutant load in the study watershed were estimated by equation of stage-discharge and discharge-loads rating curve. From these methods, BOD, T-N, and T-P have evaluated whether water quality standards would have attained. Results showed that BOD loads of about 50% plotted above the LDC, while T-N and T-P loads of about 50% plotted below the curve. It means that BOD of about 50% have exceeded the water quality criteria, while T-N and T-P of about 50% have complied with the water quality standards. Meanwhile, BOD, TN and T-P loads plotted above the LDC of low flows, implying that they were more affected by point pollution sources than nonpoint pollution sources in the study watershed.

• 대한기계학회논문집A
• /
• 제39권12호
• /
• pp.1207-1212
• /
• 2015

진동리퍼는 암반의 파쇄와 리핑 작업을 동시에 하기 위해서 개발된 장비이며 기존의 암반 파쇄용 유압 브레이커와 작동 원리가 다르다 진동리퍼의 기진력을 투스로 전달하는 기어박스-생크 용접부는 매우 중요한 부분이며 진동리퍼의 기계적 건전성의 예측이 필수적이다. 본 연구는 생크소재 및 용접재료의 변화에 따른 접부의 피로수명 예측을 목적으로 하고 있다. 생크의 재료는 Hadox-hituf, AR 400을 사용하였고 접금속은 CSF-71T, CSF-81T를 사용하였다. 피로시험은 응력비 R=0에서 각 재료조건에 대해서 수행하였다. P-S-N 선도는 JSME-S002 규정에 맞춰 파괴확률 10%, 50%, 90%에 대해서 나타냈으며 수명 예측 식을 도출하였다.

• 사물인터넷융복합논문지
• /
• 제6권2호
• /
• pp.25-29
• /
• 2020

타원곡선 암호 알고리즘은 RSA 공개키 알고리즘에 비해 짧은 키의 길이와 적은 통신 부하 때문에 IoT 환경에서 인증용으로 많이 사용되고 있다. 타원곡선 암호 알고리즘의 핵심연산인 스칼라 곱셈이 안전하게 구현되지 않으면, 공격자가 단순 전력분석이나 차분 전력분석을 사용하여 비밀 키를 찾을 수 있다. 본 논문에서는 스칼라 난수화와 타원곡선점 가리기를 함께 적용하고, 연산의 효율성이 크게 떨어지지 않으며 전력분석 공격법에 대응하는 결합 난수 타원곡선 스칼라 알고리즘을 제안한다. 난수 r과 랜덤 타원곡선 점 R에 대해 변형된 Shamir의 두 배 사다리 알고리즘을 사용하여 타원곡선 스칼라 곱셈 kP = u(P+R)-vR을 계산한다. 여기에서 위수 n=2^l±c일 때, 2^lP=∓cP를 이용하여 l+20 비트 정도의 u≡rn+k(modn)과 ν≡rn-k(modn)를 구한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.410-411
• /
• 2007

To investigate the ZnO LED which are interested in the next generation of short wavelength LEDs and Lasers, the ZnO thin films were deposited by RF magnetron sputtering system. The p-type ZnO thin film, fabricated by means of the ampoule-tube method, was used to make the ZnO p-n junction, and its characteristics was analyzed. The ampoule-tube method was used to make the p-type ZnO based on the As diffusion, and the hall measurement was used to confirm that the p-type is formed. the current-voltage characteristics of the ZnO p-n junction were measured to confirm the rectification characteristics of a typical p-n junction and the low leakage voltage characteristics. Analysis of ZnO LED V-I curve will provide a very useful technology for producing the UV ZnO LED and ZnO-based devices.

• 한국수학교육학회지시리즈B:순수및응용수학
• /
• 제23권3호
• /
• pp.309-317
• /
• 2016

As a generalization of an inflection point, we consider a point P on a smooth plane curve C of degree m at which another curve C' of degree n meets C with high intersection multiplicity. Especially, we deal with the existence of two curves of degree m and n meeting at the unique point.

• 대한수학회지
• /
• 제33권2호
• /
• pp.367-379
• /
• 1996

Let $V = {(z, y) : f(z, y) = z^n + Ay^\alpha z^p + y^\beta z^q + y^k = 0}$ and $W = {(z, y) : g(z, y) = z^n + By^\gamma z^s + y^\delta z^t + y^k = 0}$ be germs of analytic irreducible subvarieties of a polydisc near the origin in $C^2$ with n < k and (n, k) = 1 where A and B are complex numbers. Assume that V and W are topologically equivalent near the origin.