• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.47 no.3
• /
• pp.167-173
• /
• 2002

This experiment was conducted to figure out the change of soil physical properties, rice growth and yield with the years of continuous cultivation in direct dry-seeding and no-tillage machine transplanting. Experiments were conducted at NHAES(National Honam Agricultural Experiment Station, RDA, Iksan, Cheon Buk Province, South Korea) with a rice variety "Dongjinbyeo" from 1995 to 2000. In no-tillage machine transplanting cultivation, organic matter in soil was higher than that on direct dry-seeding and was significantly high in topsoil. Problematic weed species were E. crus-galli B., A. keisak H., and L. japonica M. Plant height and tiller number m-2 were higher in common-tillage during the total growth duration. The highest weedy rice occurrence of 27.5% was observed in live years' continuous direct dry-seeding and followed by 6.2%, in four years', and 3.7%, in three years'. The highest yield reduction of 38% was observed in five years' continuous direct dry-seeding. The reduction may resulted from the competition between weedy rice and cultivated rice.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.38 no.5
• /
• pp.405-412
• /
• 1993

This experiment was conducted to investigate the effects of water depths on seedling stand and early growth of califonia rice varieties, S201, M202, A301, Italico livorno and Korean variety, Hwaseongbyeo, and barnyardgrass (Echinochloa crus-galli) The coleoptile length of rice was longer with deep water depth while for the radicle length shorten. As water depth was increased, the percentage of seedling stand were decreased slightly in rice, while sharply increased in barnyardgrass. Plant height of rice with increasing water depth were longer, whereas that of barnyardgrass reduced significantly with weaker. Tiller number of rice and barnyardgrass were significantly reduced as water depth increased. Dry matter weight and healthy score of rice seedling at 35DAS were highest in 7.5cm water depth followed saturated moisture, 15, and 22.5cm water depth, while for barnyardgrass those were especially negatively affected by deep water depth. These results showed that the seedling stand and early growth of barnyardgrass was highly suppressed by deeper water levels compared with rice. Rice cultivars which are showes growth characteristics in deeper water levels at early growth stage were Italico livorno and S201 in Japonica / Indica.

• Korean Journal of Food Science and Technology
• /
• v.45 no.6
• /
• pp.693-699
• /
• 2013

A simple, sensitive, and specific method for quantifying the nicotine content of synthetic favoring substances (SFS) was developed using high performance liquid chromatography (HPLC) with a photo-diode array detector (PDA). Nicotine was extracted from SFS samples by using an acid-base liquid-liquid extraction method with dichloromethane and distilled water. The nicotine content was quantified by HPLC/PDA (261.9 nm) with a $C_{18}$ column under a gradient of 10% acetonitrile with 20 mM ammonium formate (ammonia solution adjusted to pH 8.7) to 100% acetonitrile. The calibration curve, analyzed from concentration standards between 0.1 to 2 mg/L, presented linearity with a correlation coefficient ($r^2$)>0.9999. The limit of quantitation (LOQ) of nicotine in SFS was 0.4 mg/kg, and the average recoveries ranged from 76.4% to 96.3%. The repeatability of measurements, expressed as the coefficient of variation (CV%), ranged from 1.74 to 5.12%. This newly developed method for nicotine quantification in SFS can be considered an analytical method with an acceptable level of sensitivity and repeatability.

• Journal of Animal Environmental Science
• /
• v.17 no.sup
• /
• pp.7-20
• /
• 2011

This study was conducted to analyze the mixing ratio of raw feed materials for the methane mitigation and also to identify the minimum rearing density for improving the productivity of beef calves as eco-friendly fodder. Raw materials used in this study for the formulation of feed for methane reduction were crushed corn and alfalfa along with other 21 species. In addition, to investigate the appropriate rearing density, 12 Hanwoo calves with average weight of 150 kg was selected and experiment was conducted for four months. Methane gas emission (Bo) is about 3-4 times less in TMR 4 compared to TMR 1, 2 and 3. Feed price calculated for TMR 4 ration was also affordable. In addition, all TMRs showed a normal ruminal pH. Disappearance rate was observed to be lower in TMR 4 as compared to TMR 1, 2 and 3, but methane production decreased by 24 to 37%. The result showed improved total body weight, average daily gain and feed conversion ratio in rearing low-density ($18m^2/head$), and general treatment ($9m^2/head$) compared to overcrowding treatment ($6m^2/head$). In addition, blood components (total protein, glucose, AST, ALT and GGT factors) involved in health and disease treatments and health-related nutrition metabolism are lower in the low-density and general treatment compared to the high density treatment. Postural development (development of body size) i.e., weight, height and width significantly increased in the low and general density treatment compared to high density treatment. Especially excellent improvement was observed in low-density treatment than the general treatment. Moisture content, colonic bacteria and coccidium are higher in low and high density treatments than in the general treatment. The adequacy for beef rearing density is considered to be more desirable in an area more than $6m^2/head$. In conclusion, present study suggests that possibility of methane reduction through adjusting mixed feed ration. Also, rearing density is also an important factor in the growth and development of beef calves.

• The Journal of Engineering Geology
• /
• v.21 no.1
• /
• pp.65-77
• /
• 2011

Hydrochemical and carbon isotopic (${\delta}^{13}C_{DIC}$) analyses of 11 water samples, and noble gas isotopic analyses of 8 water samples collected in the Kyeoungbuk and Kangwon areas of Korea were performed to determine their hydrochemical characteristics and to interpret the source of noble gases and $CO_2$ gas in the water. The carbonated mineral waters are weakly acidic (PH = 5.59-6.04), and electrical conductivity ranges from 302 to $864\;{\mu}S/cm$. The chemical composition of all the water samples is Ca-$HCO_3$ type. The high contents of Fe and Mn exceed the safe limits for drinking water. The ${\delta}^{13}C_{DIC}$ values of the samples range from -5.30‰ to -2.84‰, indicating that the carbon is supplied mainly from a deep-seated source and to a lesser degree from an inorganic carbonate source. The $^3He/^4He$ ratios of the samples range from $1.51{\times}10^{-6}$ to $6.45{\times}10^{-6}$. The samples plot into three groups on a $^3He/^4He$ versus $^4He/^{20}Ne$ diagram: the deep-seated field (e.g., a mantle source), the atmospheric field, and the air-mantle mixing field. A wide range of $^4He/^{20}Ne$ ratios is observed ($0.036{\times}10^{-6}$ to $1.76{\times}10^{-6}$), indicating that while radiogenic $^4He$ is dominant in these water samples, mantle-origin He is also present. The supply of $CO_2$ gas and noble gases from a deep-seated source to carbonated waters is inferred to be controlled by geological structures such as faults and geological boundaries.

• Journal of environmental and Sanitary engineering
• /
• v.15 no.4
• /
• pp.59-77
• /
• 2000

This study was carried out to investigate on several factors, which contaminative the water quality through the water pipe during feeding water, in 42 largescaled apart-ments(total 84 cases) and assayed the Volatile Organic Compounds(VOCs) and concen-tration of heavy metals that inflow and outflow in reservior water in Jeonnam area(Mokpo, Suncheon, Yeosu) from January 1999 to December 1999. The results obtained were summarized as follows ; 1. The quality of the water pipe composition in the order of frequency in the quality of water pipes were Copper(45.2%)> Zinc(38.9%)> Stainless steel(9.5%)> PVC(4.8%)> PM(2.4%) in observing 42 sites. All of the drain pipes were used the cast iron quality. 2. The result of certification curve from 12 items(17kind) of VOCs was $1.0-4.0{\mu{g}}/{\ell}$ range, a coefficient of correlation was shown 0.99 over. A MDL of each substance range was within $0.1-1.0{\mu{g}}/{\ell}$. 3. The result of the assay, 5 kinds(Viny chloride, Dichloromethane, Ethylbenzene, M,P-xylene, Styrene) of the VOCs of 14 kinds was not detected and the other items were detected slightly. The detection rate of one item and over in total VOCs samples, were 25.9% in inflow and 27.9% in outflow. And frequency of detect in inflow/outflow of THM(Chloroform, Bromodichloro-methane, Dibromochloromethane, Bromoform) were shown higher than 94.1%, 97.0% each stages. It comes to the conclusion that all of the samples were reason able for drinking water standards. 4. The coefficient of correlation were reasonable, it shown 0.999 over in $0.1-1.0{\mu{g}}/{\ell}$ of a measuring range conditions of 4kinds in organic substance(Zn, Cu, Fe, Mn). 5. The results were showed suitability in 78 cases(92.9%) and unsuitability in 6 cases (7.1%), in 84 cases of in organic substances. Compare to inflow stage, mean concentrations of heavy metal, were increased slightly in Zn, Cu, Fe except Mn than outflow stage. The result of the mean concentration in organic substance inflow and outflow in the apartment water tank using Pair-compared T-test, in 95% reliance index, were $0.179mg/{\ell}(0.151-0.307mg/{\ell})$ in Zinc, $0.136mg/{\ell}(0.113-0.230mg/{\ell})$ in Copper, $0.052mg/{\ell}(0.048-0.098mg/{\ell})$ in Fe, and there was a bit growing tendency but there was no differece in Mn. 6. The mean concentration of Copper which used Cu pipe as a water supply pipe in apartment were $0.216mg/{\ell}(0.161-0.338mg/{\ell})$ in case of the Zine pipe were $0.286mg/{\ell}(0.204-0.435mg/{\ell})$. It shows that the detection rate was more higher than the other material used in Cu or Zn as the water supply pipe. We supposed to Cu and Zn substance were gushing out water supply pipe.

• Korean Journal of Soil Science and Fertilizer
• /
• v.14 no.1
• /
• pp.37-43
• /
• 1981

This pot experiment was conducted to find out the optimal fertilization ratio of the cations(K: Ca: Mg) in various soil conditions. Soil samples were collected from uncultivated mountains and hills where development for grass lands is under consideration. The optimum ratios were computed by the Homes systematic variation technique. The results were summarized as follows : 1. The optimum fertilization ratios of the cations (K : Ca : Mg) for the high yields of grass-clover mixed sward at various areas were obtained (Table 4) 2. The relatively high optimum fertilization ratios of K in Daegu and Taegwalryong, Ca in Unbong, and Mg in Cheju district gave the high yields of clover in mixed sward. They were positively related to the low contents of the above cations in the soils or the relatively low content ratio comparing with other cations. 3. The yields of clover in mixed sward were seriously affected by the changes in both the fertilization ratio and total concentration of cations comparing to those of the grass yields. As a consequence, total yields, quality, and botanical composition of the mixed sward were also affected. 4. The antagonis among the cations K, Ca, and Mg was known from the point of mineral contents of grass and clover. 5. The equivalent ratio K/(Ca+Mg) or grass was greatly increased by the range of 2.4 and 3.3 in the K-group treatment, which was higher than the critical level 2.2 of grass tetany, otherwise that. of clover by the range of 0.9 and 1.2. Therfore, it may be concluded that if the botanical composition of grass/legume sward is optimum, the incidence of grass tetany can be eliminated.

• Journal of Sericultural and Entomological Science
• /
• v.2
• /
• pp.49-61
• /
• 1962

The insect Diplosis mori Yokoyama is causing extensive destruction of mulberry trees in Korea with a resultant loss in silk production. This study was made to determine an effective method of control. Methods and Materials Used Preliminary studies were made to determine more exactly the life cycle of the insect. Based on this information, various control measures were tested, including the use of spray methods with BHC and control of larvae by tilling. Results Obtained 1. Life cycle studies (a) In the Suwon area, this-insect has 5 generations per year. The first starts in the later part of June and the final cycle ends in the later part of September. (b) The adult insects appear about 7: 00-8: 00 P.M. and live for 2-5 days. Females live in longer periods than the male. (c) Larvae lives inside the second and third stipules (A. B.) before mulberry leaf development. They cause extensive damage to the leaves at the point where they are attached to the stem. (d) Weather conditions considerably affect the life cycle. The pupa particularly are affected and not be able to change into the moth stage when there is a long period of no rain. (e) Larvae are large......0.3 to 2.0mm......and are milky-white immediately after hatching but turn to pinkish as the worm matures. The matured worm has a jumping ability up to 15-20cm. The worm burrows into the ground 1.5 to 3.0 cm before changing into the pupal stage. (f) The pupal stage usually lasts 7-8 days, in summer weather conditions and the pupa is surrounded with a coarse cocoon. (g) These insects, as a general rule, overwinter as pupae but sometimes as larvae. 2. Control measures (a) BHC dust applied on the ground seem most effective. It should be done 4-5 days after the worm has burrowed into the ground. For this control, it is recommended that 6kg of a 2% formation Tanbo(l0ares) be used. (b) For the effective spraying against the fly, it is recommended that a formulation of liquid BHC spray terials be used at the rate of 400-600 liters per Tanbo. (c) Tillage methods which provide a cover of soil 5cm or more in depth above infested areas will effect-maively prevent the emergence of the fly from the pupal stage. 3. Conclusions Methods of control against Diplosis mori Yokoyama can be tied more closely to the life cycle of the insect with more effective results. Further studies are needed to complete information on possible controls during or after hibernation. Economic studies on the cost of these control measures are also needed.

• The Korean Journal of Ecology
• /
• v.24 no.3
• /
• pp.157-168
• /
• 2001

Herbicides have been used to control weeds for decades. If detoxification upon exposure to herbicides requires considerable amounts of energy, it could affect the pattern of resource allocation to growth and reproduction of crops. We examined the effects of three levels of a herbicide (Control, Low, and High) on germination, growth and reproductive characters of Glycine max treated twice, i.e., before and after seed germination. Since flowering time of G. max was separated into two groups, flowering time was also considered as a variable in this study. The rate of seed germination tended to be higher at the low level of herbicide compared to other levels. Chlorosis and shape variation of leaves were apparent after the second herbicide treatment, but completely disappeared after six weeks of treatment. The herbicide effects on growth characters were somewhat different between early and late flowering plants, but plants treated with both low and high levels of herbicide reduced their growth compared to those in the control group regardless of flowering time. Plants at the high level of herbicide exhibited the highest growth rate later in the season, suggesting that plants compensated to some extent for reduced growth. However, growth reduction among plants at the high level of herbicide was persistent until the end of growing season. Among plants flowered late in the season, plants in the control level bore a higher number of nodules per plant than those in other levels; such a pattern did not exist among plants flowered early in the season. Plants treated with low and high levels of herbicide produced a lower number of flowers than those in the control. Thus, the herbicide examined affected not only the growth and reproductive characters of non-target crops but also the development and growth of root nodules.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.23 no.3
• /
• pp.640-658
• /
• 1996

The purpose of this study was to examine the mechanism of improving acid resistance of Nd-YAG laser irradiated tooth enamel and determine the most effective energy density for improving acid resistance. The bovine tooth enamel were lased with a pulsed Nd-YAG laser. The energy densities of exposed laser beam were varied from 10 to $70\;J/cm^2$. To investigate the degree of improving acid resistance by irradiation, all the samples were submerged to demineralize in 0.5 N $HClO_4$ solution for 1 minute. After 1 minute, 0.05 % $LaCl_3$ was added to the solution for interrupting the demineralization reaction. The amounts of dissolved calcium and phosphate in the solution were measured by using an atomic absorption spectrophotometer and the UV/VIS spectrophotometer, respectively. To examine the mechanism of improving acid resistance, X-ray diffraction analysis, infrared spectroscopy, and scanning electron microscopy were taken. The X-ray diffraction pattern of the samples were obtained in the $10^{\circ}{\sim}80^{\circ}2{\theta}$ range with $Cu-K{\alpha}$ radiation using M18HF(Mac Science Co.) with X-ray diffractometer operating at 40 KV and 300 mA. The infra-red spectra of the ground samples in 300 mg KBr pellets 10 mm diameter were obtained in the $4000cm^{-1}\;to\;400cm^{-1}$ range using JASCO 300E spectrophotometer. The scanning electron microscopy was carried out using JSM6400(JEOL Co.) with $500{\sim}2000$ times magnification. The results were as follow 1. The concentration of calcium dissolved from laser irradiated enamel with $50J/cm^2$ was significantly lesser than that of unlased control group (p<0.05) 2. From the result of the X-ray diffraction analysis, $\beta$-TCP, which increases acid solubility, was identified in lased enamel but the diffraction peaks of (002) and (004) became sharp with increasing energy density of laser irradiation. This means that the crystals in lased samples were grown through the c-axis and subsequently, the acid solubility of enamel decreased. 3. The a-axis parameter was slightly increased by laser irradiation, whereas the c-axis parameter was almost constant except for a little decrease at $50J/cm^2$. 4. In the infra-red spectra of lased enamels, phosphate bands ($600{\sim}500cm^{-1}$), B-carbonate bands (870, $1415{\sim}1455cm^{-1}$), and A-carbonate band ($1545cm^{-1}$) were observed. The amounts of phosphate bands and the B-carbonate bands were reduced, on the other hand, the amount of the A-carbonate band was increased by increase the energy density. 5. The SEM experiments reveal that the surface melting and recrystallization were appeared at $30J/cm^2$ and the cracks were observed at $70J/cm^2$. From above results, It may be suggested that the most effective energy density for improving acid resistance of tooth enamel with the irradiation of Nd-YAG laser was $50J/cm^2$. The mechanism of improving acid resistance were reduction of permeability due to surface melting and recrystallization of lased enamel and reduction of acid solubility of enamel due to decrease of carbonate content and growth of crystal.