• Journal of environmental and Sanitary engineering
• /
• v.15 no.4
• /
• pp.91-97
• /
• 2000

The objective of this study was to evaluate the possiblity of Foodwaste and co-treatment with other waste for vermistabilization. The value of oxidation-reduction potential(Eh) of the dewaterized foodwaste by a plant of subatmospheric evaporation was a possitive(+) value indicating, but the values of pH, salinity was idicating an unfavorable condition for earthworm life. The paper mill mixing waste properties by ripening for 20days were changed into the favorable range for earthworm. The growth of earthworms in foodwaste and mixing waste of paper mill 30% was found to be 68%, 84% for the survival rate, 227%, 275% for the liveweight increasing rate, respectively. The ingestion rate of foodwaste and mixing waste of paper mill 30% indicate 0.72g/g·d, 0.81g/g·d, respectively. About 62∼75% of ingestion amount produce cast and characteristics of cast indicate pH 6.1∼6.5 organic component 34∼42%, salinity 0.35∼0.4, CEC 73∼94 me/100g, N, P, K concentration 0.8∼1.2%, 0.4∼1.6%, 0.43∼0.5% respectively. Therefore it can be evaluated that the casts are good soil condition and organic fertilizer.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.2
• /
• pp.79-83
• /
• 1987

The reduction of a series of 1-substituted benzyl-3-cyanoquinolinium ions (p-$cH_3$, H, p-Br, m-F, p-CN) by sodium borohydride has been investigated. In all cases the products from these reactions were found to be 1, 2-dihydroquinolines over 82% yields. Rates of reduction were measured in basic condition and in solvent system consisting of 4 parts of isopropyl alcohol and 1 part of water by volume. Second order rate constants were obtained for these reactions. When the ratio of [$OH^-$] to [$BH_4^-$] becomes large the observed rate constants ($K_{obs}$) decrease by a small factor. Reaction scheme and rate law are discussed. Bronsted ${\alpha}(=\frac{d\;In\;k}{d\;In\;K})$ obtained by using the value of equilibrium constant K, which was obtained previously, was not 0. Instead, a value of 0.36 was obtained which indicated that the reduction by borohydride was structure-dependent according to the Marcus formalism even though the reaction rate was close to the diffusion limit.

• Fashion & Textile Research Journal
• /
• v.23 no.6
• /
• pp.810-825
• /
• 2021

This study measured and analyzed clothing pressure at each measurement part of commercial body shapers to provide basic information for product design and clothing pressure standard and level. This study used five body shaper. Clothing pressure measurements were taken at 18points: Anterior area 8points, lateral area 5points, posterior area 5points. The findings of this study were as follows. As a result of measuring the clothing pressure, the body shaper 1 showed the highest pressure, and body shaper 5 showed the lowest pressure at almost of the measurement points of the three body types. In some cases, body shapers 2, 3, and 4 showed different orders of pressure depending on the measurement point. The highest measured values in most body shapers were the P1 shoulder area and the P2 bust area. The lowest measurement area differed by body type, but mainly P3 underbust area, P4 thorax area and P9 axillary area, P11 waist lateral area, P13 hip lateral area. These body shapers showed different results depending on the the manufacturers and body type of middle-aged women, and because there was no standard for the pressure value. Therefore, it is necessary to design a body shaper sizing system after accurately setting the clothing pressure value for each body part of the consumer.

• Journal of Animal Science and Technology
• /
• v.53 no.1
• /
• pp.7-13
• /
• 2011

The aim of this study was to identify the polymorphism on exostosin-1 (EXT1) gene and to associate with economic traits in Hanwoo (Korean cattle). We sequenced for detection of single nucleotide polymorphism (SNP) with 24 unrelated individuals and identified four SNPs (T272196A, C272359T, G290964A and A302092G). Relationship between the genotypes of 583 Hanwoo individuals by PCR-RFLP and economic traits were analyzed by general linear model. In EXT1 gene, there were four SNPs associated with economic traits such as eye muscle area breeding value, marbling score breeding value, backfat and thickness breeding value (p<0.05 to p<0.01). In conclusion, this study indicates an important role of EXT1 gene in determining the meat quality or economic characteristics in Hanwoo.

• Journal of Preventive Medicine and Public Health
• /
• v.26 no.1 s.41
• /
• pp.49-64
• /
• 1993

To provide the basic data for assessment of renal dysfunction related to silicosis, urinary N-acetyl-$\beta$-D-giucobarninidase(NAG) activity known as a sensitive markers for early renal damage were measured in 58 silicosis patients, and control subjects of 40 pulmonary tuberculosis Patients and 51 official workers. The results were summarized as fellows. 1. The values of blood urea nitrogen and serum creatinine in all subjects were within reference limits. But the mean value of urinary NAG activity($7.25{\pm}7.31U/g\;creatinine$) was beyond reference value and more sensitive test than others. 2. The mean value of urinary NAG activity in silicosis group was $11.98{\pm}9.05U/g\;creatinine$ and significantly higher than in tuberculosis and healthy group(p<0.01), but the mean values of NAG activity in tuberculosis and healthy group were not different(p>0.05). 3. The value of NAG activity in tuberculosis had a tendency to be increased according to severity of disease, but that was not significant(p>0.05). The value of NAG activity was increased significantly by use of nephrotoxic antituberculosis drugs(p<0.05). 4. The value of NAG activity in silicosis had a tendecy to be increased according to the size of nodule, use of nephrotoxic antituberculosis drugs and shortness of onset duration, but the increase was not significant(p>0.05). 5. After excluding the users of nephrotoxic antituberculosis drugs, the mean values of NAG activity in healthy control and in tuberculosis control were same as 3.63 U/g creatinine and 3.60 U/g creatinine, respectively. But the mean value of NAG activity in silicosis group was remarkably increased as 10.90 U/g creatinine(p<0.01). As above results, even though there are no abnormal finding in screening renal function test, silicosis can be related with renal dysfunction. And it will be very useful to apply urinary NAG activity in health management of workers exposed to dust.

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.1
• /
• pp.293-297
• /
• 2013

Background: : Chemotherapy-induced thrombocytopenia (CIT) is an important cause of morbitity in patients with cancer. Aim: To investigate the effect of the baseline plasma D-dimer level, an important marker for thrombotic activity, on chemotherapy-induced thrombocytopenia in patients with stage III colon cancer. Materials and Methods: A total of 43 (28 men) eligible patients were divided into two groups according to whether they exhibited chemotherapy-induced thrombocytopenia: Group 1 (n=21) and Group 2 (n=22). Comparison was made using demographic, histopathologic, and laboratory variables. Additionally, baseline plasma D-dimer levels underwent receiver operation characteristics curve analysis, and areas under the curve were calculated. Sensitivity, specificity, and positive and negative likelihood rates were then determined. Results: The incidence of chemotherapy-induced thrombocytopenia had a significant correlation with baseline platelet count (r=0.568, P=0.031) and baseline plasma D-dimer levels (r=0.617, P=0.036). When the cut-off point for the latter was set as 498 ng/mL, the area under the curve was 0.89 (95%CI: 0.74-0.93), the sensitivity was 91.4%, the specificity was 89.7%, the positive likelihood rate was 3.64 and the negative likelihood rate was 0.24 for chemotherapy-induced thrombocytopenia diagnosis. Conclusions: The baseline level of plasma D-dimer could help to differentiate high-risk patients for chemotherapy-induced thrombocytopenia.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.19 no.3
• /
• pp.135-141
• /
• 2019

Background: The fear of needle insertion and pain during anesthesia is a source of patient dissatisfaction in dentistry. Inferior alveolar nerve block (IANB) remains the most common type of block and is in itself painful. Computer-controlled local anesthetic delivery (CCLAD) has been proven to reduce the pain associated with injection of anesthetics in various blocks. However, the efficacy of CCLAD for IANB in adults remains unknown. Methods: Sixty-four adult patients requiring bilateral IANB were selected and divided into two groups: group A (50 patients receiving IANB via CCLAD) and group B (50 patients receiving IANB using a conventional cartridge syringe). Pain perception and patient comfort were assessed using the visual analog scale and the 5-point semantic scale, respectively. Results: The pain perception was compared between the two groups using the Mann-Whitney U-test, and the P value was 0.003. The patient comfort was also compared using the same test, and the P value was 0.484. Conclusion: A significant difference was observed in the pain perception of the patients during CCLAD. The patient comfort was grossly equal for both techniques.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.26 no.6
• /
• pp.167-174
• /
• 2022

The objective of this study is to evaluate the dynamic properties of DUS (damping-up system) composed of the materials with excellent damping capacity, and to compare with those of the conventional hangar bolt. The main parameters are the type and hardness (𝜂_H), of rubber and the prestress force (value converted from the compression strain (𝜂_R) in the stress-strain relationship of rubber). The dynamic properties were examined from the natural frequency (𝜔_n), maximum response acceleration (A_m), amplification coefficient (𝛼_p), maximum relative displacement (𝚫_m), and damping ratio (𝜉_D). The test results showed that the A_m, 𝛼_p, and 𝚫_m values of DUS were 46.3%, 46.6% and 62.9% lower, respectively, and the 𝜉_D value was 3.89 times higher, when compared to those of the conventional hangar bolt. In particular, the 𝛼_p value was 1.3 for DUS, and 2.45 for the conventional hanger bolt, which were similar to those of rigid and flexible components specified in KDS 41 17 00, respectively. Consequently, in the optimal details of DUS, the 𝜂_H values of 50 and 45 were required for the NR (natural rubber) and EPDM (ethylene propylene diene monomer), and the 𝜂_R value of 5% was also recommended.

• Journal of the Korean Society of Industry Convergence
• /
• v.17 no.3
• /
• pp.170-177
• /
• 2014

This study was conducted to know the behavior of pH behavior in the tomato juices to find out an effective medium for microbial cultivation. Bacterial culture media is a material consist a mixture of nutrients used to grow microorganisms on or in it. In addition, microbial culture media can also be used for isolation, propagation, testing the nature physiological, and calculation of the number of microorganisms. Fresh tomato juice is used for basic ingredient, therein added salt, sugar and EM (Effective Microbial). The fermented solution placed in a room with a temperature of 40oC. Data retrieval before the pH value reached a constant value is done every 12 hours, after constant rate data collection was done every 24 hours. The pH value has been steady after 372 hours of fermentation process (15.5 days). From the results obtained that the amount of additional ingredient which added into tomato juice does not affect final pH value of solution. Thereby the most effective treatment for microbial cultivation media is treatment number four.

• Journal of Korean Port Research
• /
• v.10 no.2
• /
• pp.69-90
• /
• 1996

This study is related to save the bearing capacity from using Meyerhof formula namely, static mechanics formula with the S.P.T(N value) of the soft ground and is to choose the soft ground improvement method by the using of total load for the proper method of the pile foundation and then to design the most suitable pile foundation to fit the actual circumstance. The purpose of this study is calculating the diameter of the pile foundation by static mechanics formula and introducing the optimum design condition from the result of the bearing capacity for using N value of the S.P.T obtained from the deep soft ground about the piles such as P.H.C pile, pipe and cast-in-place pile of big diameter, etc. As above-mentioned, it is considered that the use of P.H.C pile or pipe pile is advisable on the synthetical investigation and that the selection of cast-in-place pile method is desirable in terms of the constructive safety and durability.