• Journal of Life Science
• /
• v.30 no.7
• /
• pp.634-639
• /
• 2020

Starfish are a potential source of marine materials, but their unique odor can limit application. Our previous work suggested that brittle star Ophioplocus japonicus extract could be more effective as a cosmetic material by reducing its odor through a roasting process. However, the biological properties of heat-treated Ophioplocus japonicus extract (HOJE) remain poorly understood. We here examined the anti-inflammatory potential of HOJE in lipopolysaccharide (LPS)-induced RAW 264.7 cells. HOJE significantly inhibits LPS-stimulated nitric oxide (NO) production without affecting cell viability in a dose-dependent manner and suppresses LPS-induced expression of inducible nitric oxide synthases (iNOS) and pro-inflammatory cytokines such as interleukin-6 and -1β. Furthermore, treatment of pyrrolidine dithiocarbamate to inhibit nuclear factor kappa B (NF-κB) signaling accelerated the inhibitory effect of HOJE on NO production, and the translocation of NF-κB p65 from the cytosol to the nucleus was attenuated by HOJE. These results show that HOJE ameliorates inflammation partly through NF-κB signaling which consequently suggests that it has anti-inflammatory potential.

• Journal of Veterinary Clinics
• /
• v.22 no.3
• /
• pp.175-180
• /
• 2005

The purpose of this study is to investigate the effects of formulation variables on the release of cefadroxil form chitosan beads, to optimize the preparation of chitosan beads loaded with the drug for controlled release, and to evaluate the drug release form chitosan beads in dogs. Chitosan beads were prepared with tripolyphosphate (TPP) by ionic cross-linking and those sizes were less than 1 mm in diameter. The release behaviour of cefadroxil was affected various factors. As pH of TPP solutions decreased, the entrapment efficiency of cefadroxil increased, whereas the release of cefadroxil decreased. The release rate of cefadroxil form chitosan beads decreaed with the increased TPP solution concentration. When cross-linking time increased, the release of the drug from chitosan beads decreased. The cefadroxil loaded beads were implanted to 4 mixed breed dogs. The concentration of cefadroxil in sera due to chitosan beads implanted with 50 mg/kg body weight of beads was sustained more than 1 ug/ml for the whole 7 days period. Therefore, the cefadroxil loaded beads can be used successfully in pyoderma of dogs. These results indicate that chitosan beads may become a potential delivery system to control the release of drug.

• Radiation Oncology Journal
• /
• v.16 no.3
• /
• pp.245-250
• /
• 1998

Purpose : This study was to evaluate survival, failure patterns, and prognostic factors of stage I squamous cell carcinoma of the glottic larynx after curative radiation therapy. Materials and Methods : A retrospective analysis was done for 57 patients with glottic cancer who were treated with curative radiation therapy from June 1985 to November 1992. There were 55 male and two female patients. Patients' age ranged from 17 to 71 years(median 39 years). Radiation therapy was delivered five times a week, 2 Gy daily, total 66 Gy using 6 MV X-ray. Results : Complete response(CR) was noted in 51 out of 57 patients (89.5%) and persistent disease (PER) in six out of 57 patients(10.5%). The disease-free survival rates at 3 and 5 years were 72.9% and 63.8%, respectively. Seven failures were observed among 51 CR patients during follow-up. Salvage total laryngectomy for six recurred patients and partial laryngectomy for one recurred patient were done with successful results, i.e., all of them were actually salvaged. Among six PER patients, salvage total laryngectomy for two patients and partial laryngectomy for two patients were done and two patients refused operation. Following salvage surgery for the four PER patients, three were salvaged and one failed locoregionally. Among the 13 failures 10(76.9%) were salvaged with surgery. The ultimate local control rate at 5 years was 92.3% and overall 47 out of 57 (82.5%) patients were able to preserve their larynx. The 5-year disease-free survival rates were 85.5% for posterior lesions, and 61.6% for anterior lesions(P<0.05). Cord mobility, involvement of anterior commissure, field size, and T stage did not impact on disease-free survival. Conclusion : Considering the high percentage of voice preservation with initial radiotherapy, radiotherapy should be the first choice in the treatment of stage 1 glottic carcinoma.

• Journal of the Mineralogical Society of Korea
• /
• v.21 no.4
• /
• pp.331-339
• /
• 2008

In the upstream of Nakdong river in Bonghwa-gun, Gyeongsangbuk-do, certain areas of riverside were found to be covered by weathered mine tailings which were assumed to be migrated and deposited by flood. This study was conducted to investigate the formation and characteristics of the secondary minerals from tailings and related leaching behavior of heavy metals in the severely weathered tailing deposits by river waters. Quartz, feldspar, micas, chlorite, hornblende, talc, pyroxene (johannsenite), pyrite, and calcite were identified as primary minerals by XRD. Kaolinite can be formed by the weathering of tailings, but considering the short period of weathering time, kaolinite in the deposits is considered to be from unweathered tailings or moved from soils. The secondary minerals such as goethite, gypsum, basanite, and jarosite were also identified. The formation of the secondary minerals was affected by the species of primary minerals and pH conditions. The weathering of pyrite produced sulfate minerals such as gypsum, basanite, jarosite, and also goethite. Mn oxide was also identified by SEM, coated on the primary minerals such as quartz. This Mn oxide was poorly crystalline and thought to be the weathering product of johannsenite (Mn-pyroxene). The Fe and Mn oxides are the main minerals determining the brown/red and black colors of weathered tailings. EDS results showed that those oxides contain high concentrations of Pb, Zn, and As, indicating that, in the river, the formation of Fe and Mn oxides can control the behavior and leaching of heavy metals by co-precipitation or adsorption.

• Journal of the Earthquake Engineering Society of Korea
• /
• v.10 no.1 s.47
• /
• pp.41-49
• /
• 2006

Through the 1982 Urahawa-ohi and the 1995 Kobe earthquakes, a number of bridge columns were observed to develop a flexural-shear failure due to the bond slip as a consequence of premature termination of the column longitudinal reinforcement. Because the seismic behavior of RC bridge piers is largely dependent on the performance of the plastic hinge legion of RC bridge piers, it is desirable that the seismic capacity of RC bridge pier is to evaluate as a curvature ductility. The provision for the lap splice of longitudinal steel was not specified in KHBDS(Korea Highway Bridge Design Specification) before the implementation of 1992 seismic design code, but the lap splice of not more than 50%, longitudinal reinforcement was newly allowed in the 2005 version of the KHBDS. The objective of this research is to investigate the distribution and ductility of the curvature of RC bridge column with the lap splice of longitudinal reinforcement in the plastic hinge legion. Six (6) specimens were made in 600 mm diameter with an aspect ratio of 2.5 or 3.5. These piers were cyclically subjected to the quasi-static loads with the uniform axial load of $P=0.1f_{ck}A_g$. According to the slip failure of longitudinal steels of the lap spliced specimen by cyclic loads, the curvatures of the lower and upper parts of the lap spliced region were bigger and smaller than the corresponding paris of the specimen without a lap splice, respectively. Therefore, the damage of the lap spliced test column was concentrated almost on the lower part of the lap spliced region, that appeared io be failed in flexure.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.3
• /
• pp.237-243
• /
• 2015

In this research, isothermal conduction calorimetry analysis has been conducted to investigate the reactivity of alkali activated slag binders. In order to secure the reactivity and workability of alkali activated slag binders, experiences with various types and concentrations of alkali activators were performed. Isothermal conduction calorimetry were measured with different alkali activators and mass ratio of $SO_3$ to binders as variables, and sodium tripolyphosphate ($Na_2P_3O_{10}$) and hydrated sodium borate ($Na_2B_4O_710H_2O$) were used to control setting time. As a results, alkali activated slag binders required alkali activators with 4 to 5 percent of concentration to accelerate the formation of calcium silicate hydrate(C-S-H) by alkali-activation, and overall heat generation rate delayed as accumulated heat decreased due to the high $SO_3$ contents. Moreover, the use of hydrated sodium borate as setting retarder causes elongated setting time due to delaying heat generation, so it can be considered that setting retarder played an important role in delaying total heat generation rate.

• Journal of the Korean Electrochemical Society
• /
• v.7 no.4
• /
• pp.183-188
• /
• 2004

In order to develop polymer electrolyte for lithium/sulfur batteries, highly microporous P(VdF-HFP) membranes were prepared by phase inversion method. Porous structure was controlled by extracting NMP with mixture of deionized water and methanol. Porous structure of the membranes was observed with SEM. Polymer electrolytes were prepared by soaking the porous membranes in 1M $LiCF_3SO_3-TEGDME/EC$. The ionic conductivity of polymer electrolyte was found to be at high as $2\times10^{-3}S/cm$ when the polymer membrane extracted by $80\%$ methanol was used. The microporous polymer electrolyte optimized in this work displayed high ionic conductivity, uniform pore size, low interfacial resistance and stable ionic conductivity with storage time. The ionic conductivity of polymer electrolytes was measured with various lithium salts, and the conductivity showed $3.3\times10^{-3}S/cm$ at room temperature when $LiPF_6$ was used as a lithium salt.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.3
• /
• pp.517-531
• /
• 1999

This paper presents the development of the 2-mode variable gain high power amplifier for a transmitter of INMARSAT-M operating at L-band(1626.5-1646.5 MHz). This SSPA(Solid State Power Amplifier) is amplified 42 dBm in high power mode and 36 dBm in low power mode for INMARSAT-M. The allowable error sets +1 dBm of an upper limit and -2 dBm of a lower limit, respectively. To simplify the fabrication process, the whole system is designed by two parts composed of a driving amplifier and a high power amplifier, The HP's MGA-64135 and Motorola's MRF-6401 are used for driving amplifier, and the ERICSSON's PTE-10114 and PTF-10021 are used the high power amplifier. The SSPA was fabricated by the circuits of RF, temperature compensation and 2-mode gain control circuit in aluminum housing. The gain control method was proposed by controlling the voltage for the 2-mode. In addition, It has been experimentally verified that the gain is controlled for single tone signal as well as two tone signals. The realized SSPA has 42 dB and 36 dB for small signal gain within 20 MHz bandwidth, and the VSWR of input and output port is less than 1.5:1 The minimum value of the 1 dB compression point gets 5 dBm for 2-mode variable gain high power amplifier. A typical two tone intermodulation point has 32.5 dBc maximum which is single carrier backed off 3 dB from 1 dB compression point. The maximum output power of 43 dBm was achieved at the 1636.5 MHz. These results reveal a high power of 20 Watt, which was the design target.the design target.

• Resources Recycling
• /
• v.8 no.4
• /
• pp.45-56
• /
• 1999

The purpose of tlus sludy was to preparc raw material powder for Mn-Zn iclrile, h m mined mill scale and fero-Mn, usins a co-spray roasting process The mill scale and ferra-Mn uscd in this raalins process was rcf~nedb y mesn-ns of a slxc~apl rxcss ~nvolvinm~a te~ialsc ontalning imp~u-ltleso r less than 100 pprn In this study an effeclive spray roaster system. wllich produces fme complex oxide powder, collects produccd ~owder.,m d prcvel~tse ~~llssiooifi HCI gas. was also manufactured. By means of spray~ngp urifcd raw malerial solu~lionl nln a manufacued high tcmpervture rumace. &-ferrite powder and a comnpleu o ~ d e powder of Fe,O; and M,x203 were manufactured. The chmcterlstics of the composllion. surface urca, and p'miicle size dismbulion or the produced powder were exmined. ptoduced powdcr was then ~ m e dwi tli ZnO powder. aid olher addilives of defined cornposnion, and Mn-Zn femite cares werc praiuccil by meuns of Sorlning and closely controlled sintering processes. The magpelic p~oprlieso f c olo~ss, initlal permeability. mauin~u~mnn agnehc flux. coz~civcr orcc and residual magnccic flux for the above cores we,= measured, and fmm Il~ase I-csulls the eflicacy of lhe co-spray roasling pncess to pl.ellare raw material powder lor Mn-Zn ferntc was established

• Journal of the Earthquake Engineering Society of Korea
• /
• v.8 no.3
• /
• pp.1-12
• /
• 2004

Due to the 1989 Loma Prieta, 1995 Hyogoken Nambu earthquakes, etc, a number of bridge columns  were collapsed in flexure-shear failures as a consequence of the premature termination of the column longitudinal reinforcement. Nevertheless, previous researches for the performance of bridge columns were concentrated on the flexural failure mode. It is well understood that the seismic behaviour of RC bridge piers was dependent on the performance of the plastic hinge of RC bridge piers, the ductility of which was desirable to be computed on the basis of the curvature. Experimental investigation was made to evaluate the variation of the curvature of the plastic hinge  region for the seismic performance of earthquake-damaged RC columns in flexure-shear failure mode. Seven test specimens in the aspect ratio of 2.5 were made with test parameters: confinement ratios, lap splices, and retrofitting FRP materials. They were damaged under series of artificial earthquakes that could be compatible in Korean peninsula. Directly after the pseudo-dynamic test, damaged columns were retested under inelastic reversal cyclic loading under a constant axial load, $P=0.1f_{ck}A_g$. Residual seismic capacity of damaged specimens was evaluated by analzying the moment-curvature hysteresis and the curvature ductility. Test results show that the biggest curvature was developed around 15cm above the footing, which induced the column failure. It was observed that RC bridge specimens with lap-spliced longitudinal steels appeared to fail at low curvature ductility but significant improvement was made in the curvature ductility of RC specimens with FRP straps wrapped around the plastic hinge region. Based on the experimental variation of the curvature of RC specimens, new equivalent length of the plastic hinge region was proposed by considering the lateral confinement in this study. The analytical and experimental relationship between the displacement and the curvature ductility were compared based on this proposal, which gave excellent result.