• Applied Science and Convergence Technology
• /
• v.25 no.6
• /
• pp.108-115
• /
• 2016

Even if ion pumps are widely and mostly used in ultra-high vacuum (UHV) conditions, virtually every existing ion pump has its maximum pumping speed around 1E-6 mbar (1E-4 Pa). Discharge intensity in the ion pump Penning cell is defined as the current divided by pressure (I/P). This quantity reflects the rate of cathode bombardment by ions, which underlies all of the various pumping mechanisms that occur in ion pumps (chemisorption on sputtered material, ion burial, etc.), and therefore is an indication of pumping speed. A study has been performed to evaluate the influence of magnetic fields and cell dimensions on the ion pump discharge intensity and consequently on the pumping speed at different pressures. As a result, a combination of parameters has been developed in order to design and build an ion pump with the pumping speed peak shifted towards lower pressures. Experimental results with several different test set-ups are presented and a prototype of a new 200 l/s ion pump with the maximum pumping speed in the 1E-8 mbar (1E-6 Pa) is described. A model of the system has also been developed to provide a framework for understanding the experimental observations.

• Korean Journal of Applied Biomechanics
• /
• v.25 no.1
• /
• pp.57-64
• /
• 2015

Purpose : The purpose of this study was to analyze setter toss motion kinematically according to toss types. Method : Dependent variables were elapsed time, vertical displacement of the body center, the projected speed of the ball, and differences of the joint angle to the target for four setters positioning. Result : There was no significant difference in the time but the ball contact time was shorter when the toss distance of P3 was longer. There was significant difference in the vertical displacement of COM (p<.05). The vertical displacement of COM showed that the vertical movement gradually decreased when the quick distance was longer. The vertical displacement of COM was difference (p<.05), also there was difference of the ball speed (p<.001) at the Release point(E4). There was significant difference in the knee joint angle at a certain moment among the Release(E4) and Landing point(E5)(p<.05). The hip joint was significant difference among the Apex(E2), Ball Touch(E3), Release(E4), and the Landing point(E5) on the surface(E2, E3, E4 p<.05; E5 p<.005). The shoulder angle was significant difference among the Ball Touch(E3), Release(E4) and the Landing point(E5) on the surface(E3, E4 p<.05; E5 p<.001). The elbow was significant difference in the Apex(E2) (p<.05). The wrist was significant difference in the Release(E4) (p<.05). Conclusion : If we find the clue to expect the direction of the setter's ball, we have to fine the clues in the Apex(E2) that hip join and elbow, Ball Touch(E3) that hip joint and shoulder joint, Release(E4) that wrist, elbow, hip joint, and knee joint.

• Journal of the Korean Vacuum Society
• /
• v.13 no.1
• /
• pp.14-21
• /
• 2004

It is essential to increase the switching speed of power devices to reduce the energy loss because high frequency is commonly used in power device operation these days. In this work electron irradiation has been conducted to reduce the lifetime of minority carriers and thereby to increase the switching speed of a$p^+- n^-$ junction diode. Effects of electron irradiation on the electrical properties of the diode are reported The switching speed is effectively increased. Also the junction leakages and the forward voltage drop which are anticipated to increase are found to be negligible in the $p^+- n^-$ junction diodes irradiated with the optimum energy and dose. The analysis results of DLTS and C-V profiling indicate that the defects induced by electron irradiation in the silicon substrate are donor-like ones which have the energy levels of 0.284 eV and 0.483 eV. Considering all the experimental results in this study, it might be concluded that electron irradiation is a very useful technique in improving the switching speed and thereby reducing the energy loss of $p^+- n^-$ junction diode power devices.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.17 no.2
• /
• pp.11-17
• /
• 2011

Background: To evaluate the influences of Eye movement program applied to elderly people on static balance. Methods: The subjects consisted of fourteen elderly people. The subjects were divided into two group. The control group (n=7) received no exercise and/or stimulation. The Eye movement program training (E/P) group (n=7) performed balance training using word card and batom. E/P group were accomplished during 4weeks (5 day/week, 60 min/day). All tests were completed before and after experiment. The static balance ability was measured by normal standing when eye open and close on good balance system, respectively. For each case, the experimental data were obtained in 3 item; mean X speed, mean Y speed and velocity moment. Results: The result of this study were as follows: 1. In E/P group, the statistically significants were shown on only mean Y speed in the case of normal standing when eye open (p<.05), but the statistically significants were not shown on mean X, Y speed and velocity moment in the case of normal standing when eye close (p>.05). 2. In control group, the statistically significants were not shown on all posture (p>.05). 3. There was a statistically significant difference on the mean Y speed and velocity moment in the case of normal standing when eye open between control group and E/P group (p<.05). Conclusions: The above results revealed that balance training using Eye movement program were partly effective for improving the static balance ability.

• The Journal of Korean Academy of Orthopedic Manual Physical Therapy
• /
• v.15 no.1
• /
• pp.49-57
• /
• 2009

Purpose : To evaluate the effects hip abductor strengthening exercise using elastic band on static balance. Methods : The subjects consisted of twenty healthy people. The subjects were divided into two group. The control group(n=10) received no exercise and/or stimulation. The elastic band strengthening exercise(E/E) group(n=10) performed hip abductor for strengthening exercise using elastic band. E/E group were accomplished during 6weeks(3day/week, 30-40min/day). All tests were completed before and after experiment. The static balance ability was measured by normal standing when eye open and close on GOOD BALANCE System, respectively. For each case, the experimental data were obtained in 3 items: mean X speed, mean Y speed and velocity moment. Results : The results of this study were as follows; 1. In E/E group, the statistically significants were shown on Y speed and velocity moment in the case of normal standing when eye open and X speed and velocity moment in the case of normal standing when eye close(p<0.05). 2. In control group, the statistically significants were not shown on all posture(p>0.05). 3. There was a statistically significant difference on the X speed and velocity moment in the case of normal standing when eye close between control group and E/E group(p<0.05). Conclusion : The above results revealed that hip abductor strengthening exercise using elastic band were partly effective for improving the static balance ability.

• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.1
• /
• pp.56-62
• /
• 2012

This paper presents design and implementation of the speed controller for DC motor system using Embeded Target for TI C2000 DSP library in Matlab/Simulink is introduced. Speed controller are easily design and implemented by using the Matlab/Simulink program. Feedback of motor speed is processed through eZdsp F2812 AID converter using encoder and pulse meter as speed sensor. Real-time program of controller is drawn using Simulink and converted program code for speed control of P control, PID control and parameter estimation base adaptive control is downloaded into the TI eZdsp 2812 board. Experiments were carried out to examine validity of speed response for implemented controllers. And even if controlled plant becomes alteration studied controller design and implementation easily method.

• Journal of Mushroom
• /
• v.19 no.2
• /
• pp.81-87
• /
• 2021

Roridin E, produced by Podostroma cornu-damae, is a mycotoxin with anticancer activity. To increase the content of roridin E, submerged culture conditions were optimized using response surface methodology. Three factors, namely, medium initial pH, incubation time and agitation speed were optimized using a Box-Behnken design. The optimum submerged culture conditions to increase the content of roridin E included a medium with an initial pH of 4.0, an incubation time of 12.90 days, and an agitation speed of 63.03 rpm. The roridin E content in the submerged culture, under the aforementioned conditions, was 40.26 mg/L. The findings of this study can help lower the current price of roridin E and promote its related research.

• Korean Journal of Applied Biomechanics
• /
• v.33 no.1
• /
• pp.34-44
• /
• 2023

Objective: The purpose of this study was to examine the effects of increasing running speed on human stability by comparing the Lyapunov Exponent (LyE) and Coefficient of Variation (CV) methods, with the goal of identifying key variables and uncovering new insights. Method: Fourteen adult males (age: 24.7 ± 6.4 yrs, height: 176.9 ± 4.6 cm, weight: 74.7 ± 10.9 kg) participated in this study. Results: In the CV method, significant differences were observed in ankle (flexion-inversion/eversion; p < .05) and hip joint (internal-external rotation; p < .05) movements, while the center of mass (COM) variable in the coronal axis movements showed a significant difference at the p < .001 level. In the LyE method, statistical differences were observed at the p < .05 level in knee (flexion-extension), hip joint (internal-external rotation) movements, and COM across all three directions (sagittal, coronal, and transverse axis). Conclusion: Our results revealed that the stability of the human body is affected at faster running speeds. The movement of the COM and ankle joint were identified as the most critical factors influencing stability. This suggests that LyE, a nonlinear time series analysis, should be actively introduced to better understand human stabilization strategies.

• Proceedings of the KIEE Conference
• /
• 1998.07a
• /
• pp.390-392
• /
• 1998

Recently, the interest of the high speed railway train is increased. Because it is energy-conserving and largely independent of fuel oil, an electric train is environmental friendly. In this paper we designed the eddy current brake for simulator of the Korean High Speed Railway Train(hereafter KHRT). Braking force and normal force according to current and speed are calculated.

• 시스템엔지니어링워크숍
• /
• s.4
• /
• pp.65-69
• /
• 2004

Abstract Tilting train has been developed to increase the oprational speed of the trains on conventional lines which have many curves. This train are tilted at curves to compensate for unbalanced carbody centrifugal acceleration to a greater extent than compensation produced by the track cant, so that passengers do not feel centrifugal acceleration and thus trains can run at higher speed at curves. This paper developed PDM(product data management) to make a system engineering of TTX(Tilting Train eXpress) with maximum operation speed 180 km/h.