• Journal of Chest Surgery
• /
• v.42 no.2
• /
• pp.165-174
• /
• 2009

Background: With the advances of cardiac surgery, the demand for an artificial prosthesis has increased, and this has led to the development and utilization of diverse alternative materials. We conducted this research to improve an artificial prosthesis by examining the changes of the physical qualities, the pressure related tensile strength, the change in elasticity and the thermostability of a xenograft valve (porcine) and pericardium (bovine, porcine) based on the type of fixation liquid we used. Material and Method: The xenograft valves and pericardium were assigned into three groups: the untreated group, the fixed with glutaraldehyde (GA) group and the glutaraldehyde with GA+solvent such as ethanol etc. group. The surgeons carried out each group's physical activities. Each group's uniaxial tension and elasticity was measured and compared. Thermostability testing was conducted and compared between the bovine and porcine pericardium fixed with GA group and the GA+solvent group. Result: On the physical activity test in the surgeon's hand, no significant difference between the groups was sensed on palpation. For suture and tension, the GA+solvent group was slightly firmer than the low GA concentration group. In general, the circumferential uniaxial tension and elasticity of the porcine aortic and pulmonary valves were better in the fixed groups than that in the untreated group. There was no significant difference between the GA and GA+solvent groups (p>0.05). Bovine and porcine pericardium also showed no significant difference between the GA group and the GA+solvent group (p>0.05). When comparing between the groups for each experiment, the elasticity tended to be stronger in most of the higher GA concentration group (porcine pulmonary valve, porcine pericardium). On the thermostability testing of the bovine and porcine pericardium, the GA group and the G+solvent group both had a sudden shrinking point at $80^{\circ}C$ that showed no difference (bovine pericardium: p=0.057, porcine pericardium: p=0.227). Conclusion: When fixing xenograft prosthetic devices with GA, adding a solvent did not cause a loss in pressure-tension, tension-elasticity and thermostability. In addition, more functional solvents or cleansers should be developed for developing better xenografts.

• Journal of Animal Science and Technology
• /
• v.48 no.2
• /
• pp.255-268
• /
• 2006

Twenty four Hanwoo cull cows were assigned to 2 groups, control and melengerol acetate(MGA)+selenium supplement containing vitamin E(SeE), based on the parity(6.5±1.7 birth) and body weight (493.17±55.61kg), and the experiment was conducted to establish the reasonable fattening method of cull cows for 240 days. Average daily body gains during 240 days were 0.51kg and 0.63kg in control and MGA+SeE, respectively(P<0.10). DDMI/ADG of MGA+SeE group improved compared to control group(P<0.05). Therefore, supplementation of MGA+SeE in concentrates may accelerate both of the growth rate and feed efficiency in Hanwoo cull cows. MQI from MGA+SeE was more developed based on the larger rib-eye area and thinner backfat thickness in carcass than that from control. Marbling score for MGA+SeE tended to increase compared to control. Dietary Se supplementation significantly affected muscle Se concentration in longissimus dorsi meat of MGA+SeE group(P<0.05). Similar results to Se were obtained from α-Tocoperol concentration. During 7 days of simulated retail display, accumulations of thiobarbituric acid reactive substances(TBARS) concentration in beef was greater(P<0.05) in control than in supplemented cows. These results supported the hypothesis that supplementation of MGA+SeE improve the growth performance and carcass grade both by the growth stimulating effect of MGA+SeE and by preventing the oxidation of the longissimus dorsi muscle in Hanwoo cull cows.

• Korean Journal of Food Science and Technology
• /
• v.50 no.4
• /
• pp.407-413
• /
• 2018

The current study reviews the manufacturing characteristics, upon aging, using different distillation methods with Saccharomyces cerevisiae 88-4 isolated from traditional Nuruk. The alcohol content slightly decreased at 180 days of aging period, under the conditions: -60 cmHg, distilling temperature $50^{\circ}C$, head cut 7%, and body cut 30%. The alcohol content decreased by 2.2% at: -50 cmHg, distilling temperature $60^{\circ}C$, head cut 7%, and body cut 30%. From 2-thiobarbituric acid (TBA) analysis, the TBA values were not found to change significantly in most of the alcohols, but increased at conditions of: -60 cmHg, distilling temperature $60^{\circ}C$, head cut 7%, and body cut 50% and -50 cmHg, distilling temperature $50^{\circ}C$, head cut 7%, and body cut 50%, when initial alcohol levels were low. According to n-propanol, iso-butanol, and isoamyl alcohol analysis, with increasing aging period, the n-propanol and isoamyl alcohol content did not change, although that of iso-butanol decreased. The flavor components showed different results based on the aging period. Results of sensory evaluation showed no significant difference based on aging. The sensory evaluation test was continued for 180 days at a condition of: -60 cmHg, distilling temperature $60^{\circ}C$, and body cut 50%, which had the best overall evaluation ($5.8{\pm}0.9$).

• Korean Journal of Applied Biomechanics
• /
• v.31 no.4
• /
• pp.241-248
• /
• 2021

Objective: The purpose of this study was to investigate the difference in muscle strength, kinematics, and kinetics between injured and non-injured sides of the leg after Achilles Tendon Rupture surgery during walking and running. Method: The subjects (n=11; age = 30.63 ± 5.69 yrs; height = 172.00 ± 4.47 cm; mass = 77.00 ± 11.34 kg; time lapse from surgery = 29.81 ± 10.27 months) who experienced Achilles Tendon Rupture (ATR) surgery participated in this study. The walking and running trials were collected using infrared cameras (Oqus 300, Qualisys, Sweden, 100 Hz) on instrumented treadmill (Bertec, U.S.A., 1,000 Hz) and analyzed by using QTM (Qualisys Track Manager Ver. 2.15; Qualisys, U.S.A). The measured data were processed using Visual 3D (C-motion Inc., U.S.A.). The cutoff frequencies were set as 6 Hz and 12 Hz for walking and running kinematics respectively, while 100 Hz was used for force plate data. Results: In ATR group, muscle strength there were no difference between affected and unaffected sides (p> .05). In kinematic analysis, subjects showed greater ROM of knee joint flexion-extension in affected side compared to that of unaffected side during walking while smaller ROM of ankle dorsi-plantar and peak knee flexion were observed during running (p< .05). In kinetic analysis, subjects showed lower knee extension moment (running at 2.2 m/s) and positive ankle plantar-flexion power (running at 2.2 m/s, 3.3 m/s) in affected side compared to that of unaffected side (p< .05). This lower positive ankle joint power during a propulsive phase of running is related to slower ankle joint velocity in affected side of the subjects (p< .05). Conclusion: This study aimed to investigate the functional evaluation of the individuals after Achilles tendon rupture surgery through biomechanical analysis during walking and running trials. Based on the findings, greater reduction in dynamic joint function (i.e. lower positive ankle joint power) was found in the affected side of the leg compared to the unaffected side during running while there were no meaningful differences in ankle muscle strength and walking biomechanics. Therefore, before returning to daily life and sports activities, biomechanical analysis using more dynamic movements such as running and jumping trials followed by current clinical evaluations would be helpful in preventing Achilles tendon re-rupture or secondary injury.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.31 no.2
• /
• pp.236-246
• /
• 2004

Artificial carious lesions in various depths were observed with visual examination using light transillumination, bite-wing radiography, laser fluorescence, and dye-enhanced laser fluorescence to determine the reproducibility, correlation of each diagnostic method, diagnostic sensitivity and diagnostic specificity. And optical densities according to demineralized times were measured whether laser fluorescence could be used as a quantitative diagnostic method. The following results were obtained whether laser fluorescence could be used for diagnosis of initial proximal caries. 1. Tau-c values of visual examination was 0.08 which showed lowest reproducibility and those of bite-wing radiography, laser fluorescence, dye-enhanced laser fluorescence were 0.60, 0.48, and 0.64, respectively which showed relatively high reproducibility. 2. The correlation between demineralization time and each examination was the highest in dye-enhanced laser fluorescence$({\gamma}=0.51)$ followed by laser fluorescence$({\gamma}=0.43)$, bite-wing radiograph$({\gamma}=0.35)$, and visual examination$({\gamma}=0.33)$. Dye-enhanced laser fluorescence and laser fluorescence showed significant correlation with demineralization time. 3. The sensitivity of laser fluorescence and dye-enhanced laser fluorescence for diagnosing approximal caries based on bite-wing radiography were 67%, 100% and those of specificity were 57%, 11% which showed diagnostic specificity was relatively lower than sensitivity. 4. The difference in optical density(DFR) between sound teeth and carious lesions according to lesion depth was high with dye-enhanced laser fluorescence compared with laser fluorescence. DFR measured with laser fluorescence according to changes in lesion depth was statistically significant but was not statistically significant with dye-enhanced laser fluorescence. Based on these results, laser fluorescence and dye-enhanced laser fluorescence have comparable diagnostic power as bite-wing radiography in early diagnosis of proximal caries.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.42 no.2 s.302
• /
• pp.27-36
• /
• 2005

This thesis proposed an effective encryption method for the DCT-based image/video contents and made it possible to operate in a high speed by implementing it as an optimized hardware. By considering the increase in the amount of the calculation in the image/video compression, reconstruction and encryption, an partial encryption was performed, in which only the important information (DC and DPCM coefficients) were selected as the data to be encrypted. As the result, the encryption cost decreased when all the original image was encrypted. As the encryption algorithm one of the multi-mode AES, DES, or SEED can be used. The proposed encryption method was implemented in software to be experimented with TM-5 for about 1,000 test images. From the result, it was verified that to induce the original image from the encrypted one is not possible. At that situation, the decrease in compression ratio was only $1.6\%$. The hardware encryption system implemented in Verilog-HDL was synthesized to find the gate-level circuit in the SynopsysTM design compiler with the Hynix $0.25{\mu}m$ CMOS Phantom-cell library. Timing simulation was performed by Verilog-XL from CadenceTM, which resulted in the stable operation in the frequency above 100MHz. Accordingly, the proposed encryption method and the implemented hardware are expected to be effectively used as a good solution for the end-to-end security which is considered as one of the important problems.

• Asian-Australasian Journal of Animal Sciences
• /
• v.22 no.5
• /
• pp.667-673
• /
• 2009

Ninety six intact male sheep (12 months old with mean live weight of about 35 kg) were used to assess the effects of restricted feeding on intake, digestion, nitrogen balance and metabolizable energy (ME). The animals were selected from two known Iranian small and large body size breeds: 48 Sangsari (S) and 48 Afshari (A), and were divided into two equal groups: restricted (R) and a control (C). Each group had 48 sheep (24 each breed). The experiment had a duration of 15 and 75 days adaptation and treatment periods, respectively. The animals were individually placed in metabolism cages and fed a diet based on pelleted concentrate mixture consisting of alfalfa, barley grain, cottonseed meal and barley straw. The animals in group C were fed ad libitum, while animals in group R were fed at maintenance level and maintained a relatively constant live weight. During the experiment, the average daily weight gain (ADG) of S and A animals in R group was 0.34 and -0.25 g/d (0.02 and -0.02 $g/kg^{0.75}/d$), respectively. While that of S and A animals in C group was 174.4 and 194.4 g/d (10.16 and 11.48 $g/kg^{0.75}/d$), respectively. Nitrogen (N) was determined by both measured and regression methods. Animals of R group stayed at about zero N balance (0.01 and -0.00 g $N/kg^{0.75}/d$ for S and A animals, respectively). The N retention of animals of both S and A breeds in C group were similar (0.45 and 0.46 g $N/kg^{0.75}/d$, respectively). Digestible organic matter intake (DOMI) and ME requirement for maintenance (MEm) were measured by both constant weight technique and regression method by regressing N balance on DOMI and ME intake on ADG. The measured DOMI during constant weight was 24.61 and 24.27 g $DOMI/kg^{0.75}/d$ and the calculated DOMI from regression equation was 24.24 and 24.22 g $DOMI/kg^{0.75}/d$, for S and A animals, respectively. The measured MEm was 402 and 401 kJ $ME/kg^{0.75}/d$ and the calculated MEm from regression analysis was 398 and 400 kJ $ME/kg^{0.75}/d$ for S and A breeds, respectively. There were no significant differences between both measured and regression techniques. There was no significant difference between S and A breeds for DOMI, N retention, MEm, digestibility and metabolizability values. Digestibility values for OM, GE and CP and metabolizability were significantly (p<0.05) higher in restricted feeding sheep compared with that of sheep fed ad libitum.

• Journal of Life Science
• /
• v.16 no.3 s.76
• /
• pp.454-458
• /
• 2006

HSF1 is the heat shock transcription factor in Saccharomyces cerevisiae. S. cerevisiae KNU5377 can ferment at high temperature such as $40^{\b{o}}C$. We have been the subjects of intense study because Hsf1p mediates gene expression not only to heat shock, but to a variety of cellular and environmental stress challenges. Basing these facts, we firstly tried to construct the hsf1 gene-deleted mutant. PCR-method for fast production of gene disruption cassette was introduced in a thermotolerant yeast S. cerevisiae KNU5377, which allowed the addition of short flanking homology region as short as 45 bp suffice to mediate homologous recombination to kanMX module. Such a cassette is composed of linking genomic DNA of target gene to the selectable marker kanMX4 that confers geneticin (G418) resistance in yeast. That module is extensively used for PCR-based gene replacement of target gene in the laboratory strains. We describe here the generation of hsf1 gene disruption construction using PCR product of selectable marker with primers that provide homology to the hsf1 gene following separation of haploid strain in wild type yeast S. cerevisiae KNU5377. Yeast deletion overview containing replace cassette module, deletion mutant construction and strain confirmation in this study used Saccharomyces Genome Deletion Project (http:://www-sequence.standard.edu/group/yeast_deletion_project). This mutant by genetic manipulation of wild type yeast KNU5377 strain will provide a good system for analyzing the research of the molecular biology underlying their physiology and metabolic process under fermentation and improvement of their fermentative properties.

• Journal of Pharmaceutical Investigation
• /
• v.32 no.3
• /
• pp.223-229
• /
• 2002

Metformin is an oral antihyperglycemic agent used in the therapy of noninsulin-dependent diabetes mellitus and does not cause hypoglycemia at the therapeutic dose. Its mechanism of action may involve an increased binding of insulin to its receptors and glucose uptake at the post-receptor level. The purpose of the present study was to evaluate the bioequivalence of two metformin tablets, Glucophage (Daewoong Pharmaceutical Co., Ltd.) and Glycomin (Ilsung Pharmaceuticals Co., Ltd.), according to the guidelines of Korea Food and Drug Administration (KFDA). The metformin release from the two metformin tablets in vitro was tested using KP VII Apparatus II method with various dissolution media (pH 1.2, 4.0, 6.8 buffer solution and water). Twenty four normal male volunteers, $23.75{\pm}1.96$ years in age and $68.77{\pm}10.41\;kg$ in body weight, were divided into two groups with a randomized $2{\times}2$ cross-over study. After one tablet containing 500 mg as metformin was orally administered, blood was taken at predetermined time intervals and the concentrations of metformin in serum were determined using HPLC with UV detector. Besides, the dissolution profiles of two metformin tablets were very similar at 떠1 dissolution media. The pharmacokinetic parameters such as $AVC_t,\;C_{max}\;and\;T_{max}$ were calculated. The ANOVA test was performed for the statistical analysis of the logarithmically transformed $AVC_t\;and\;C_{max}$, untransformed $T_{max}$. The results showed that the differences in $AVC_t,\;C_{max}\;and\;T_{max}$ between two tablets based on the Glucophage were 0.09%, 6.09% and -8.22%, respectively. There were no sequence effects between two tablets in these parameters. The 90% confidence intervals using logarithmically transformed data were within the acceptance range of log(0.8) to log(1.25) $(e.g.,\;log(0.94){\sim}log(1.09)\;and \;log(1.01){\sim}log(1.15)$\;for\;AVC_t\;and\;C_{max},\;respectively)$, indicating that Glycomin tablet is bioequivalent to Glucophage tablet.

• Journal of Pharmaceutical Investigation
• /
• v.35 no.3
• /
• pp.193-199
• /
• 2005

Gabapentin is an antiepileptic drug that is structurally similar to ${\gamma}-aminobutyric$ acid (GABA), but does not interact with the GABA receptor. It does not bind significantly to plasma proteins, and is excreted to unchanged form in the urine. The purpose of the present study was to evaluate the bioequivalence of two gabapentin capsules, $Neurontin^{TM}$ capsule 300 mg (Pfizer Pharm. Co., Ltd.) and Kuhnil $Gabapentin^{TM}$ capsule 300 mg (Kuhnil Pharm. Co., Ltd), according to the guidelines of the Korea Food and Drug Administration (KFDA). The release of gabapentin from the two gabapentin formulations in vitro was tested using KP VIII Apparatus II method with various dissolution media (pH 1.2, 4.0, 6.8 buffer solution and water). Twenty six healthy male subjects, $22.46{\pm}1.86$ years in age and $67.64{\pm}7.24$ kg in body weight, were divided into two groups and a randomized $2{\times}2$ cross-over study was employed. After a single capsule containing 300 mg as gabapentin was orally administered, blood samples were taken at predetermined time intervals and the concentrations of gabapentin in serum were determined using HPLC with fluorescence detector. The dissolution profiles of two formulations were similar at all dissolution media. In addition, the pharmacokinetic parameters such as $AUC_t$, $C_{max}$ and $T_{max}$ were calculated and ANOVA test was utilized for the statistical analysis of the parameters using logarithmically transformed $AUC_t$, $C_{max}$ and untransformed $T_{max}$. The results showed that the differences between two formulations based on the reference drug, $Neurontin^{TM}$ capsule 300 mg, were -2.03, -0.43 and 4.29% for $AUC_t$, $C_{max}$ and $T_{max}$, respectively. There were no sequence effects between two formulations in these parameters. The 90% confidence intervals using logarithmically transformed data were within the acceptance range of log 0.8 to log 1.25 $(e.g.,\;log\;0.89{\sim}log\;1.09\;and\;log\;0.91{\sim}log\;1.09$ for $AUC_t$ and $C_{max}$, respectively). Thus, the criteria of the KFDA bioequivalence guideline were satisfied, indicating Kuhnil $Gabapentin^{TM}$ capsule 300 mg was bioequivalent to $Neurontin^{TM}$ capsule 300 mg.