• The Korean Journal of Emergency Medical Services
• /
• v.22 no.1
• /
• pp.73-82
• /
• 2018

Purpose: The purpose of this study was to compare the tidal volumes and airway pressures of 3 mask-sealing methods (one hand C-E, two hands C-E, and one hand O-E) for ventilation treatment. Methods: The study subjects were 45 paramedic students. Tidal volume was measured for the three sealing methods by setting a ventilator, connecting it to the masks for 2 minutes, and using Respi-trainer software. Results: Regarding general characteristics, the group of men, in upper grades, and with practical training experience and experience and experience in the implementation of bag-valve-mask ventilation provided higher tidal volumes. Regarding physical characteristics, larger hands and greater grip strength correlated with higher tidal volume. Two hands C-E generated the highest tidal volume of $483.78{\pm}34.14mL$, one hand O-E generated $449.59{\pm}51.09mL$ and one hand C-E generated $394.31{\pm}68.95mL$. Conclusion: Means of tidal volumes were statistically significantly different based on mask sealing methods (p<.001). Two hand C-E was performed by the two-persons task and was suggested as the most effective method. For the one-person task, one hand O-E was the more effective method compared to the previous one hand C-E.

• Food Science of Animal Resources
• /
• v.24 no.2
• /
• pp.151-155
• /
• 2004

This study was performed to develop the method of differentiation fresh and frozen meat by using the measurement of mitochondrial malate dehydrogenase. The principle of this experiment is based on the fact the enzyme proteins associated with mitochondria membrane could be released by freezing. The methods were studied by measurements of protein concentration of meat press juice, WHC (water-holding capacity), drip loss and mitochondrial malate dehydrogenase enzyme activity. Samples were stored at 4$^{\circ}C$ and -18$^{\circ}C$ during storage period, respectively. Protein concentration of meat press juice was ranged from 8.5 mg/mL to 12.7 mg/mL and increased by freezing below at -18$^{\circ}C$(p<0.05). The WHC was not significantly different between fresh meat and frozen chicken meat (p＞0.05). The amount of drip loss of fresh and frozen chicken meat at 4$^{\circ}C$ and -18$^{\circ}C$ was not significantly different (p＞0.05). Mitochondrial malate dehydrogenase activity of frozen meat (-18$^{\circ}C$) was significantly higher (p＜0.05) than that of fresh meat. Also, enzyme activity of frozen meat was maintained at the same level after 3 minutes reaction. But fresh meat had not this reaction. From these results, it suggests that mitochondrial malate dehydrogenase can be used as a promising enzyme to differentiate between fresh and frozen meat.

• Mycobiology
• /
• v.30 no.4
• /
• pp.197-201
• /
• 2002

Specific primer sets based on ribosomal DNA(rDNA) internal transcribed specer(ITS) sequences were designed for rapid detection of Phellinus linteus and P. baumii. Polymerase chain reaction(PCR) with these primers produced unique bands for each Phellinus species. The annealing temperature range is from $40^{\circ}C\;to\;55^{\circ}C$. The length of PCR products(P. linteus and P. baumii) using designed combinative primer sets of PL1F, PL2R, PB1F, PB2R, ITS5F and ITS4R, were from 520 by to 730 bp. Fifteen strains of Phellinus species including P. linteus, P. baumii, P. weirianus, P. johnsonianus, P. rhabarberinus, P. pini, P. gilvus, P. igniarius, P. nigricans and P. laevigatus were examined in this study. Five strains, including two isolated strains of P. linteus(MPNU 7001 and MPNU 7002), and two isolated strains of P. baumii(MPNU 7004 and MPNU 7005) were shown to have about 520 bp (PL1F-PL2R), 700 bp (TTS5F-PL2R) and 600 bp (PB1F-ITS4R) -sized PCR single bands respectively. This molecular genetic technique provided a useful method for rapid detection and identification of P. linteus and P. baumii.

• Journal of Magnetics
• /
• v.16 no.4
• /
• pp.444-448
• /
• 2011

In the present study, we separated the marker particles from the suspending particle mixture solution using isotacho-electrophoresis technique, a novel quantitative ionic particle separation method, in the microchannel. A multiple stacking zone of the suspending particle was visualized with variations in electric field strength, pH value and concentration of the ionic solution. In particular, the electrophoretic mobility of ionic particle (fluorescein) was estimated based on the electrophoretic velocity value measured by the particle image velocimetry. As a result, isotacho-electrophoresis zones were clearly visualized as going downstream in the electric field. The particle migration velocity increased proportional to the applied voltage increase; it was also affected by the pH value variations in the ionic solution.

• Proceedings of the KIEE Conference
• /
• 2003.07a
• /
• pp.92-94
• /
• 2003

The design of a measurement system to perform Harmonic State Estimation(HSE) is a very complex problem. In particular, the number of available harmonic instruments (Continuous Harmonic Analysis in Real Time : CHART) is always limited. Therefore, a systematic procedure is needed to design the optimal placement of measurement points. This paper presents an optimal algorithm of HSE which is based on an optimal placement of measurement points using Immune Algorithm (IAs). This HSE has been applied to power system for the validation of an optimal algorithm of HSE. The study results have indicated an economical and effective method for optimal placement of measurement points using IAs in the HSE.

• Proceedings of the KIEE Conference
• /
• 2001.10a
• /
• pp.137-139
• /
• 2001

This paper describes a new methods of detecting rotor position in SRM(switched reluctance motor). The Conventional method of position sensorless control for SRM is measuring phase current and pulse voltage applied in unexcited phase. The estimation of rotor position based on the detection of inductance by pulse current. Implementation is via low-cost electronic circuits with DSP320F241. Test results show that this technique is a possible approach to detect the rotor position of an SRM.

• Structural Engineering and Mechanics
• /
• v.78 no.1
• /
• pp.103-116
• /
• 2021

In this work, a model of a functionally graded (FG) nanotube conveying fluid embedded in an elastic medium is developed based on the nonlocal strain gradient theory (NSGT) in conjunction with Euler-Bernoulli beam theory (EBT). The main objective of this research is to investigate the nonlinear vibration and stability analysis of fluid-conveying nanotubes. The governing equations of motion are derived by means of Hamiltonian principle. The analytical expressions of nonlinear frequencies and critical flow velocities for two different types of boundary conditions including pinned-pinned (P-P) and clamped-clamped (C-C) conditions are obtained by employing Galerkin method as well as Hamiltonian Approach (HA). Comparison of the obtained results with the published works show the acceptable accuracy of the current solutions. The effects of the power-law index, the nonlocal and material length scale parameters and the elastic medium on the stability and nonlinear responses of FG nanotubes are thoroughly investigated and discussed.

• The Journal of the Korea Contents Association
• /
• v.12 no.8
• /
• pp.29-36
• /
• 2012

In CCPM Technique, as the buffer size calculation method, the Cut and Paste(C&P) method and the Root Square Error (RSE) method for all tasks carried out the same treatment, without considering the actual situation and characteristics of the task, the lack of reasonable judgment, is too simple and hasty. In this paper, taking into account the limitations of existing methods, a new method of buffer sizing method based on statistical analysis was introduced. It makes statistical analysis for the relationship between each worker and a variety of tasks, and use the information to predict the next task time. In order to verify the effectiveness of the new method, according to different task difficulty and the number of tasks set up the project. Use C&P, RSE method and new methods to predict the time of the project. Through Monte Carlo Simulation to simulate the project time, a comparison of three methods of performance. The results show that the new method can achieve the managers expect the probability of completion, and for those tasks can be completed ahead of schedule, the new method can save project time.

• Journal of the Korean Society of Tobacco Science
• /
• v.19 no.2
• /
• pp.117-123
• /
• 1997

Viral coat protein (CP) encoding cDNA with artificial start and stop codons was synthesized by reverse-transcriptase polymerase chain reaction (RT-PCR) from the Korean isolate of potato virus Y-vein nectrosis strain (pVY-VN). To make PVY CP cDNA to untranslatable form, three stop codons were inserted near the start codon by "megaprimer-PCR" method. The untranslatable CP cDNA was subcloned to plant expression vector and transferred to N. tabacum cv. NC82 by Agrobacterium-mediated transformation. Highly resistant plants to PVY infection were screened, based on symptom development after mechanical virus inoculation. By genomic PCR and Southern blot analysis, one or more copies of the untranslatable CP gene were found in all transformants. From northern blot analysis, highly resistant transgenic lines had very low level of CP transcript but susceptible lines had high level, suggesting resistance to PVY infection should be related to RNA-mediated mechanism.mechanism.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.189-189
• /
• 2008

Due to the environmental issue vast research is going on to replace the widely used lead contented piezoelectric materials. Bismuth sodium titanate (abbreviated as BNT) based bismuth sodium titanate-barium titanate (abbreviated as BNBT) ceramic was prepared by using modified method rather than conventional mixed oxide method. This modification was made to improve the properties of BNT based ceramic. In this procedure $BaTiO_3$ (abbreviated as BT) was prepared using conventional mixed oxide method. Analytical grade raw materials of $BaCO_3$ and $TiO_2$ were weighted and ball milled using ethanol medium. The mixed slurry was dried and sieved under 80 mesh. Then the powder was calcined at $1100^{\circ}C$ for 2 hours. This calcined BT powder was used in the preparation of BNBT. Stoichiometric amount of $Bi_2O_3$, $Na_2CO_3$, $TiO_2$ and BT were weighted and mixed by using ball mill. The used calcination temperature was $850^{\circ}C$ for 2 hours. Calcined powder was taken for another milling step. BNBT disks were pressed to 15 mm of diameter and then cold isostatical press (CIP) was used. Pressed samples were sintered at $1150^{\circ}C$ for 2 hours. The SEM microstructure analysis revealed that the grain shape of the sintered ceramic was polyhedral and grain boundary was well matched where as the sample prepared by conventional method showed irregular arrangement and grain boundary not well matched. And sintered density was better (5.78 g/cc) for the modified method. It was strongly observed that the properties of BNBT ceramic near MPB composition was found to be improved by the modified method compare to the conventional mixed oxide method. The piezoelectric constant dB of 177.33 pC/N, electromechanical coupling factor $k_p$ of 33.4%, dielectric constant $K_{33}^T$ of 688.237 and mechanical quality factor $Q_m$ of 109.37 was found.