• Preventive Nutrition and Food Science
• /
• v.12 no.3
• /
• pp.167-172
• /
• 2007

This study was conducted to determine the effect of hygienic processing (HP) on the reduction of microorganisms during manufacturing of saengshik with two vegetables (carrots and cabbage) and two grains (barely and glutinous rice) compared to general processing (GP). For GP, distilled water was used for washing raw materials and equipment. For HP, aqueous ozone (3 ppm) in combination with 1% citric acid and 70% alcohol were used for washing raw materials and the equipment, respectively. In carrots, after cutting, total aerobic bacteria (TAB), yeast and mold (YM) and coliforms were significantly increased to 5.19, 8.04 and 2.08 ($log_{10}$ CFU/g), respectively (p<0.05). Washing effectively reduced the increased microorganisms from cross contamination during cutting, but cross contamination increased with subsequent GP drying and milling procedures to 8.56, 8.27 and 3.71 ($log_{10}$ CFU/g) for TAB, YM and coliforms, respectively (p<0.05). On the other hand, HP washing of carrots with 3 ppm ozone in combination with 1% citric acid showed higher antimicrobial effect than GP washing, significantly decreasing the number of microorganisms (p<0.05). Further cross contamination did not occur through drying and milling due to cleaning the equipments with 70% alcohol prior to processing. After milling, the number of TAB, YM and coliforms were significantly decreased to 3.89, 4.47 and not detectable level ($log_{10}$ CFU/g), respectively (p<0.05). Similar results were observed in cabbage and grains. During storage for two months at different temperatures (22 or $4^{\circ}C$), there were no changes in numbers of spoilage microorganisms in the packaged saengsik after either processing. This suggests the importance of HP for the reduction of microorganisms during saengsik production, and demonstrates the effectiveness of disinfection at each processing stage in minimizing contamination levels to enhance microbial safety of saengshik products.

• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.45 no.6
• /
• pp.17-23
• /
• 2013

The reduction of metal ion from the cotton linter for the preparation of NMMO (N-methylmorpholine N-oxide)-based dissolving pulp was investigated. The NMMO-based dissolving pulp was usually used for the manufacture of high quality fabrics, and need to have high alpha cellulose content and high brightness. NMMO, which is environmentally friendly, and reusable after recovering process, is very sensitive to the metal ions such as Cu, Fe, Mg, and Cr. Electron beam, sulfuric acid, acetic acid, and ozone treatment before bleaching were used and the concentration changes of the metal ions were compared to that of EDTA, a chelating agent. It was found that both acid treatments (sulfuric and acetic acid) were very effective and comparable to EDTA treatment at the same dosage in metal ion reduction, but electron beam and ozone treatment were not. The sulfuric acid treatment turned out to be effective in metal ion reduction, and most inexpensive.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.5
• /
• pp.583-591
• /
• 2004

In this study, methodologies for the rational organization of air pollution monitoring network were examined by understanding the characteristics of temporal and spatial distribution of secondary air pollution, whose significance would increase hereafter. The data on $O_3$ and $NO_2$ concentrations during high ozone period in 1998~1999 recorded at the nine air pollution monitoring station in Busan were analysed using principal component analysis (PCA) and cumulative semivariogram. It was found that the ozone concentration was deeply associated with the daily emission characteristics or the $O_3$ precusors, and nitrogen dioxide concentration largely depends on the emission strength of regional sources. According to the spatial distribution analysis of ozone and nitrogen dioxide in Busan using cumulative semivariograms, the number of monitoring stations for the secondary air pollution can be reduced in east-west direction, but reinforced in north-south direction to explain the spacial variability. More scientific and rational relocation of air pollution monitoring network in Busan would be needed to investigate pollution status accurately and to plan and implement the pollution reduction policies effectively.

• KIEE International Transactions on Electrophysics and Applications
• /
• v.3C no.3
• /
• pp.77-80
• /
• 2003

An innovative ozonizer has been developed using a high frequency, surface discharge and a high purity Ti-Si-AI ceramic catalyst as a dielectric component. Using a type of thin film, a thin cylindrical compound ceramic catalyst layer was adhered to the outside surface of its inner electrode. An alternating current (AC) exciting voltage with frequencies from 0.6 KHz to 1.0 KHz and peak-to-peak voltages of 4-6 ㎸ was applied between the electrodes to produce a stable high-frequency silent discharge. A substantial reduction of the exciting voltage was also enabled by means of a thin Ti-Si-Al ceramic catalyst tube. As a result, the ozonizer can effortlessly obtain the required ozone concentration (50-60 g/$m^2$ for oxygen) and high ozone efficiency consumption power (180 g/kWh for oxygen) with-out the assistance of any particular methods. For purposes of this experiment, oxygen gas temperature was set at 2$0^{\circ}C$, with an inner reactor pressure of 1.6 atm at 600 Hz and a flow rate of 2 l/min.

• Journal of Animal Environmental Science
• /
• v.8 no.3
• /
• pp.153-158
• /
• 2002

Decolorization system using ozone was developed to reduce the pollutants and dark brown color remained in effluent of activated sludge process for pig wastewater. The results are as follows. 1. Wastewater temperature was increased during the ozone treatment from 31$^{\circ}C$ to 41.9$^{\circ}C$. 2. Oxidation reduction potential(ORP) at the beginning time was 148㎷, but it was increased to 330㎷ according to the ozone treatment. 3. 11mg/l of BO $D_{5}$ in effluent of activated sludge process was decreased to 1mg/l by ozone treatment, CO $D_{MN}$ also decreased from 83mg/l to 1.0mg/l. 4. 442 unit(dark brown color) of color in effluent of activated sludge process was changed to 6 units(colorless), and color removal efficiency was 98.6%.

• Microbiology and Biotechnology Letters
• /
• v.32 no.2
• /
• pp.166-171
• /
• 2004

In this study, we introduced enzymatic pretreatment method, together with ozone treatment for sludge digestion. We optimized the amount of enzyme and ozone, respectively for the successful sludge pretreatment. As a result, we found that as more enzyme is used, higher sludge hydrolysis efficiency was obtained. When we treated sludge by ozone ranging from 0.01g $O_3$/g SS to 0.04 g $O_3$/g SS without enzyme treatment, 0.04 g $O_3$/g SS showed the highest increase of SCOD. Meanwhile, when protease was used together with the same ozone dosage ranges, 0.03g $O_3$/g SS ozonation resulted in the highest increase of SCOD. The sludge pretreatment was optimized by controlling the amount of enzyme and ozone.

• Asian-Australasian Journal of Animal Sciences
• /
• v.32 no.6
• /
• pp.874-880
• /
• 2019

Objective: Ozone is considered a strong antimicrobial agent with numerous potential applications in the food industry. However, its high oxidizing potential can induce alterations in foods by acting on the unsaturated fatty acids. The aim of this study was to investigate the effect of ozonation on the oxidative stability of chicken breast meat obtained from animals subjected to different feeding strategies. Methods: Samples were obtained from commercial hybrid chickens (ROSS 508), some of which were nourished with a feed enriched with fats of animal origin, while the lipid source was vegetal for the remaining birds. Samples of meat belonging to both groups were treated with ozone and then analysis was performed to evaluate alterations in physical properties, lipid content, fatty acid profile, and oxidation stability. Results: Ozone induced a significant reduction in drip loss in meat samples obtained from animals nourished with vegetable fats; this nutritional strategy also produced meats leaner and richer in polyunsaturated fatty acids. Thiobarbituric acid reactive substances, useful for the assessment of lipid oxidation, were higher in samples obtained from animals fed with vegetable fats with respect to diet based on the addition of animal fats. Conclusion: The ozone treatment improved the physical parameters of meat samples obtained from animals fed with vegetable fats, however the same samples showed a higher lipid oxidation compared to what observed in the case of the dietary intake of animal fats, probably as a consequence of the marked increase in polyunsaturated fatty acids which are more susceptible to peroxidation.

• Particle and aerosol research
• /
• v.18 no.1
• /
• pp.1-8
• /
• 2022

Since 2019, the corona virus has been continuously affect human life. In particular, in the indoor space where people live, infection by airborne transmission of viruses is a problem. Among them, the spread in the subway, which is the main mode of transport for humans, can be serious. To solve this problem, our research team developed an ionic wind collector to collect and remove corona virus using an ionic wind collector and ozone. In order to apply the ionic wind collector to the subway, it must operate in two modes. Because large amounts of ozone are harmful to the human body. There is a mode that collects bio-aerosol from the air using ionic wind and a mode that inactivates viruses floating in the air by generating a large amount of ozone. As the applied voltage increased, the cleaning ability of the ionic wind collector increased, and the farther the distance between the discharge electrode and the ground plate, the higher the cleaning ability even at low current. In addition, clean air delivery rate (CADR) of an ionic wind collector was up to 5.5 m³/min. As a result of measuring the amount of ozone generated, it was confirmed that 50 ppb to 250 ppb was generated, and it was confirmed that ozone generation was controllable in the ionic wind dust collector.

• Journal of Korean Society of Environmental Engineers
• /
• v.32 no.2
• /
• pp.209-218
• /
• 2010

The fifty six components of volatile organic compounds(VOCs) were continuously measured by the hour to see the distributions their of its concentration and the ozone creating contribution of nitric oxides and VOCs in Gamjeon Odor and VOCs Monitoring Network from April to September, 2008. Aromatics occupied 51.3% of VOCs and paraffins, alkanes and olefins came in order. The monthly concentration of VOCs in Gamjeon was high in July and low in September. As for hourly concentration of ozone and nitric oxides, ozone started to increase since 10am having the highest in the daytime, and nitric oxides had the different trend from that of ozone, showing the lowest in the daytime. The photochemical ozone creating potentials(POCPs) of toluene, propane, m/p-xylene, ethylbenzene, and 1,2,4-trimethylbenzene were 30.6%, 10.2%, 9.4%, 7.4% and 5.2% respectively. These five components occupied 62.8% of total POCPs, which means they contributed to the ozone creation mainly. Related with the ozone creating contribution, the ratio of VOCs to NOx was generally under 6 occupied 72.0%, which came under the area coexisting the limit of VOCs. Therefore it is thought that the management of emission source of VOCs is very important for the reduction of ozone.

• Journal of Climate Change Research
• /
• v.7 no.4
• /
• pp.451-463
• /
• 2016

We explore the impact of Chinese future air pollutant emissions on ozone air quality in Northeast Asia (NEA) and health in South-Korea using an assessment framework including ICAMS (The Integrated Climate and Air Quality Modeling System) and BenMAP (The Environmental Benefits Mapping and Analysis Program). The emissions data sets from the climate change scenarios, the Representative Concentration Pathways (RCPs) (emission scenarios, EMSO), are used to simulate ozone air quality in NEA in the current (1996~2005, 2000s), the near future (2016~2025, 2020s) and the distant future (2046~2055, 2050s). Furthermore, the simulated ozone changes in the 2050s are used to analyze ozone-related premature mortality and economic cost in South-Korea. While different EMSOs are applied to the China region, fixed EMSO are used for other country regions to isolate the impacts of the Chinese emissions. Predicted ozone changes in NEA are distinctively affected by large changes in NOx emission over most of China region. Comparing the 2020s with the 2000s situation, the largest increase in mean ozone concentrations in NEA is simulated under RCP 8.5 and similarly small increases are under other RCPs. In the 2050s in NEA, the largest increase in mean ozone concentrations is simulated under RCP 6.0 and leads to the occurrence of the highest premature mortalities and economic costs in South-Korea. Whereas, the largest decrease is simulated under RCP 4.5 leads to the highest avoided premature mortality numbers and economic costs. Our results suggest that continuous reduction of NOx emissions across the China region under an assertive climate change mitigation scenario like RCP 4.5 leads to improved future ozone air quality and health benefits in the NEA countries including South-Korea.