• Journal of the Korean Society for Heat Treatment
• /
• v.31 no.4
• /
• pp.187-193
• /
• 2018

In this study, the electrical conductivity, transmittance and gas barrier properties of diamond-like carbon (DLC) thin films were studied. DLC is an insulator, and has transmittance and oxygen gas barrier properties varying depending on the thickness of the thin film. Recently, many researchers have been trying to apply DLC properties to specific industrial conditions. The DLC thin films were deposited by PECVD (Plasma Enhanced Chemical Vapor Deposition) process. The doping gas was used for the DLC film to have electrical conductivity, and the optimum conditions of transmittance and gas barrier properties were established by adjusting the gas ratio and DLC thickness. In order to improve the electrical conductivity of the DLC thin film, $N_2$ doping gas was used for $CH_4$ or $C_2H_2$ gas. Then, a heat treatment process was performed for 30 minutes in a box furnace set at $200^{\circ}C$. The lowest sheet resistance value of the DLC film was found to be $18.11k{\Omega}/cm^2$. On the other hand, the maximum transmittance of the DLC film deposited on the PET substrate was 98.8%, and the minimum oxygen transmission rate (OTR) of the DLC film of $C_2H_2$ gas was 0.83.

• Journal of Korean Society of Water and Wastewater
• /
• v.30 no.2
• /
• pp.167-177
• /
• 2016

This work investigated the decomposition of aqueous anatoxin-a originated from cyanobacteria using an underwater dielectric barrier discharge plasma system based on a porous ceramic tube and an alternating current (AC) high voltage. Plasmatic gas generated inside the porous ceramic tube was uniformly dispersed in the form of numerous bubbles into the aqueous solution through the micro-pores of the ceramic tube, which allowed an effective contact between the plasmatic gas and the aqueous anatoxin-a solution. Effect of applied voltage, treatment time and the coexistence of nutrients such as $NO_3{^-}$, $H_2PO_4{^-}$ and glucose on the decomposition of anatoxin-a was examined. Chemical analyses of the plasma-treated anatoxin-a solution using liquid chromatography-mass spectrometry (LC-MS) and ion chromatography (IC) were performed to elucidate the mineralization mechanisms. Increasing the voltage improved the anatoxin-a decomposition efficiency due to the increased discharge power, but the energy required to remove a given amount of anatoxin-a was similar, regardless of the voltage. At an applied voltage of 17.2 kV (oxygen flow rate: $1.0L\;min^{-1}$), anatoxin-a at an initial concentration of $1mg\;L^{-1}$ (volume: 0.5 L) was successfully treated within 3 min. The chemical analyses using LC-MS and IC suggested that the intermediates with molecular weights of 123~161 produced by the attack of plasma-induced reactive species on anatoxin-a molecule were further oxidized to stable compounds such as acetic acid, formic acid and oxalic acid.

• Journal of fish pathology
• /
• v.25 no.1
• /
• pp.47-58
• /
• 2012

Behavioral and physiological responses of juvenile red seabream (Pagrus major) to different concentrations of ethanol were investigated. No swimming and no reaction to touching by a wooden stick was observed at 0.6% ethanol group in behavioral response, and survival rate was 100% after 5 hours of treatment. Red blood cell count, hematocrit and hemoglobin levels in plasma were not significantly different among all groups. AST activities in plasma significantly decreased as ethanol concentration increased. On the contrary, ALT activities in plasma significantly increased as ethanol concentration increased. Cortisol level in plasma was the lowest in 0.6% ethanol group. Glucose levels in plasma increased significantly when ethanol concentration increased more than 0.4%. Oxygen consumption of fish in 0.6% ethanol seawater was constantly lower than that of fish in control seawater from 2 hours after the exposure to ethanol seawater until the end of experiment.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.32 no.1
• /
• pp.31-38
• /
• 2024

In this study, vinyl waste, which is the cause of environmental pollution, is recycled via an electrospinning method and applied as a separator that can be employed for energy storage devices. In detail, vinyl wastes are dissolved in a solution containing p-xylene and cyclohexanone, followed by electrospinning to obtain a vinyl waste-derived separator(VWS), and then the hydrophilic functional groups on the surface of VWS are introduced using a plasma treatment to improve wettability. Scanning electron microscopy analysis have verified that the shape and thickness of as-spun VWS vary depending on the concentration of vinyl waste. The surface hydrophility of VWS is modified by plasma treatment with applied powers ranging from 80 to 120W. The lowest contact angle is observed when the 100W power is applied to VWS(VWS-100W). In electrochemical analysis, the VWS-100W-based supercapacitor device shows the highest specific capacitance of 57.9 F g^-1. This is ascribed to the high porosity achieved by electrospinning as well as the introduction of hydrophilic functional groups by the oxygen plasma treatment. In conclusion, vinyl waste is successfully recycled into separators for energy storage devices, suggesting a new way to reduce environmental pollution.

• Journal of the Korean institute of surface engineering
• /
• v.34 no.1
• /
• pp.56-61
• /
• 2001

In this work, the surface treatment of aluminum/composites (graphite-epoxy composites) was investigated. The surface of composites was treated by $Ar^{+}$ ion beam under oxygen environment. The surface of aluminum was treated by DC plasma. The optimal condition of surface treatment for the composites was determined by measuring the contact angle as a function of ion dose. The optimal treatment condition of the aluminum was determined by measuring the contact angle and T-peel strength as a function of mixture ratio of acetylene gas to nitrogen gas. The mixture ratios used were 1:9, 3:7, 5:5, 7:3, and 9:1. The results showed that the contact angle of composites decreased from$ 81^{\circ}$ to $8^{\circ}$ as the ion dose increased from zero to $1$\times$10^{17}$ions/$\textrm{cm}^2$. The optimal condition of ion dose was $1$\times$10^{16}$ions/$\textrm{cm}^2$. The results also showed that the contact angle of aluminum was a minimum for the mixture ratio of 5:5. Similarly, the T-peel strength was a maximum for the mixture ratio of 5:5, which indicates that the optimal condition of mixture ratio of acetylene gas to nitrogen gas is 5:5.

• Journal of Adhesion and Interface
• /
• v.8 no.1
• /
• pp.15-27
• /
• 2007

Polyimide (PI) surface modification was carried out by ion-beam treatment and silane-imidazole coupling agent to improve the adhesion between polyimide film and copper. Silane-imidazole coupling agent contains imidazole functional groups for the formation of a complex with copper metal through a coordination bonding and methoxy silane groups for the formation of siloxane polymers. The PI film surface was first treated by argon (Ar)/oxygen ($O_2$) ion-beam, followed by dipping it into a modified silane-imidazole coupling agent solution. The results of X-ray photoelectron spectroscopy (XPS) spectra revealed that the $Ar/O_2$ plasma treatment formed oxygen functional groups such as hydroxyl and carbonyl groups on the polyimide film surface and confirmed that the PI surface was modified by a coupling reaction with imidazole-silane coupling agent. Adhesion between copper and the treated PI film by ion-beam and coupling agent was superior to that with untreated PI film. In addition, adhesion of PI film treated by an $Ar/O_2$ plasma to copper was better than that of PI film treated by a coupling agent. The peeled-off layers from the copper-PI film joint were completely different in chemical composition each other. The layer of PI film side showed similar C1s, N1s, O1s spectra to the original Upilex-S and no Si and Cu atoms appeared. On the other hand the layer of copper side showed different C1s and N1s spectra from the original PI film and many Si and Cu atoms appeared. This indicates that the failure occurs at an interface between the imidazole-silane and PI film layers rather than within the PI layers.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.2
• /
• pp.33-37
• /
• 2014

We have developed a novel passivation process employing a sacrificial gallium oxide process in order to recover the surface damage in AlGaN/GaN HFETs. Even with a conventional prepassivation process, surface damage during high temperature ohmic annealing cannot be avoided completely. Therefore, it is necessary to recover the damaged surface to avoid the characteristic degradation. In this work, a sacrificial gallium oxide process has been proposed in which the damaged surface after ohmic annealing was oxidized by oxygen plasma treatment and thereafter etched back using HCl. As a result, the leakage current was dramatically reduced and thus the subthreshold slope was significantly improved. In addition, the maximum drain current level was increased from 594 to 634 mA/mm. To verify the effects, the surface conditions were carefully investigated using X-ray photoelectron spectroscopy.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.37 no.2
• /
• pp.175-180
• /
• 2009

In this article, we fabricated polytetrafluoroethylene(PTFE) nozzle treated by ion beam, in order to fabricate polymer based electrospray micro thruster with super hydrophobic nozzle. To obtain the super hydrophobic surface, PTFE surface is treated by argon and oxygen plasma treatment process. The optimal condition is investigated argon and oxygen flow rate as well as the paalied energy level for the treatment process. Fabricated nozzle was evaluated by measuring contact angle, and the surface morphology was examined by using scanning electron microscope(SEM) and atomic force microscope(AFM). We observe that jetting becomes more stable and repeatable on the treated nozzle. And to evaluate performance of fabricated nozzle, we measure micro scale thrust using a cantilever and a nozzle treated by ion beam laser displacement sensor.

• Development and Reproduction
• /
• v.23 no.1
• /
• pp.11-19
• /
• 2019

The study was conducted to investigate the effects of alpha-linolenic acid (ALA) combined with bovine serum albumin (BSA) or methyl-beta-cyclodextrin (MBCD) on plasma and acrosomal membrane damages, mitochondrial activity, morphological abnormality, motility, and oxidative stress in frozen-thawed boar sperm. In previous our study, 3 ng/mL ALA had been shown protective effect during freezing process of boar sperm. Therefore, we used 3 ng/mL ALA in present study and ALA was combined with same molar ratio of BSA or MBCD (ALA+BSA and ALA+MBCD, respectively). To confirm the effect of two carrier proteins, same volume of BSA and MBCD without ALA were added during cryopreservation. Membrane damage, mitochondrial activity, reactive oxygen species (ROS) and lipid peroxidation (LPO) levels were measured using flow cytometry, and movement of sperm tail as motility parameter and morphological abnormality were observed under light microscope. In results, all of sperm parameters were enhanced by ALA combined with BSA or MBCD compared to control groups (p<0.05). Mitochondrial activity, morphological abnormality, ROS and LPO levels in ALA+BSA or MBCD groups were no significant difference compared with ALA, BSA and MBCD treatment groups. On the other hand, plasma and acrosomal membrane intact, and sperm motility in ALA+MBCD group were higher than single treatment groups (p<0.05), whereas ALA+BSA did not differ. Our findings indicate that carrier proteins such as BSA and MBCD could improve the effect of ALA during cryopreservation of boar sperm, and treatment of ALA with carrier proteins enhance membrane integrity, mitochondrial activity through reduction of ROS-induced LPO.

• Toxicological Research
• /
• v.13 no.3
• /
• pp.229-235
• /
• 1997

The elevation of intracellular calcium in various tissues due to oxidative stress induced by either menadione or adriamycin has been well documented. The increase of calcium level in platelets results in aggregation of platelets. To test the hypothesis that chemically induced calcium elevations can play a role in platelet aggregation, we have studied the effects of menadione and adriamycin on aggregation of platelets isolated from female rats. Treatment with menadione and adriamycin to platelet rich plasma (PRP) appeared to induce platelet aggregations up to 60%, as determined by aggregometry. However, exposure of PRP to rnenadione or adriamycin led to a loss of viability, as measured by lactate dehydrogenase (LDH) leakage. Morphological studies of platelets revealed that, when PRP was treated with menadione, aggregates of platelets were not observed and the numbers of platelets were decreased significantly. This suggests that menadione and adriamycin decreased turbidity by inducing platelet lysis rather than platelet aggregation. These cellular toxicities induced by menadione or adriamycin was not correlated with oxygen consumption rate but with depletion of protein thiols, suggesting that protein thiols might play an important role in chemical-induced platelet toxicity.