• 마이크로전자및패키징학회지
• /
• 제30권1호
• /
• pp.79-89
• /
• 2023

산성 조건에서의 산소 발생 반응(OER)의 효율 향상 및 안정적인 전기 촉매 개발은 양이온 교환 막 (PEM) 수전해 장치의 상용화를 위한 바람직한 목표다. 여기서 우리는 산성 OER에 대해 Ir 함량이 낮은 유망한 촉매로서 Ir이 도핑된 수소화 티타네이트 (Ir-HTO) 나노벨트를 보고한다. 크게 확인할 수 있는 {100}면이 있는 단결정 HTO 나노벨트에 낮은 함량의 Ir(~3.36 at %)을 추가하면 산성 조건에서 OER에 대한 촉매 활성과 안정성이 크게 향상된다. Ir-HTO는 상용적인 대조군 IrO2 촉매보다 성능이 뛰어나다. 10mA cm^-2의 전류밀도에서 과전압은 Ir-HTO가 25% 감소했다. Ir-HTO 촉매 성능은 산성 OER에 대한 가장 효율적인 전기 촉매로서 자리 잡고 있다. 심층적인 전기화학적 특성화를 통해 Ir-HTO에 대해 개선된 고유한 촉매 활성 및 안정성도 확인되었다. 따라서, 우리의 실험결과는 낮은 함량의 Ir이 도핑된 단결정 HTO 나노벨트가 산성조건에서 효율적이고 내구성 있는 OER 촉매로 유망 될 수 있음을 보여준다.

• Corrosion Science and Technology
• /
• 제16권5호
• /
• pp.247-256
• /
• 2017

The feasibility of using hydrazine for inhibiting pitting corrosion in copper sprinkler tubes was investigated by examining microscopical and structural evolution of corrosion by-products with SEM, EDS, and XRD. Hydrazine removed dissolved oxygen and reduced CuO and $Cu_2O$ as well. The stable phase was changed from CuO to $Cu_2O$ or Cu depending on hydrazine concentration. Hydrazine concentration of 500 ppm could convert all CuO corrosion by-products to $Cu_2O$. In a tightly sealed acryl tube filled with aqueous solution of 500 ppm hydrazine, octahedral $Cu_2O$ particles were formed while plate-like structures with high concentration of Cu, O, N and C were formed near a corrosion pit. The inside structure of a corrosion pit was not altered by hydrazine aqueous solution. Uniform corrosion of copper was almost completely stopped in aqueous solution of 500 ppm hydrazine. Corrosion potential of a copper plate was linearly dependent on log (hydrazine concentration). The concept of stopping pitting corrosion reaction by suppressing oxygen reduction reaction could be verified by applying this method to a reasonable number of real sprinkler systems before full-scale application.

• 한국재료학회지
• /
• 제33권5호
• /
• pp.222-228
• /
• 2023

Transition metal oxides formed by a single or heterogeneous combination of transition metal ions and oxygen ions have various types of crystal structures, which can be classified as layered structures and non-layered structures. With non-layered structures, it is difficult to realize a two-dimensional structure using conventional synthesis methods. In this study, we report the synthesis of cobalt oxide into wafer-scale nanosheets using a surfactant-assisted method. A monolayer of ionized surfactant at the water-air interface acts as a flexible template for direct cobalt oxide crystallization below. The nanosheets synthesized on the water surface can be easily transferred to an arbitrary substrate. In addition, the synthesizing morphological and crystal structures of the nanosheets were analyzed according to the reaction temperatures. The electrochemical properties of the synthesized nanosheets were also measured at each temperature. The nanosheets synthesized at 70 ℃ exhibited higher catalytic properties for the oxygen evolution reaction than those synthesized at other temperatures. This work suggests the possibility of changing material performance by adjusting synthesis temperature when synthesizing 2D nanomaterials using a wide range of functional oxides, resulting in improved physical properties.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2008년도 Techno-Fair 및 합동춘계학술대회 논문집 전기물성,응용부문
• /
• pp.201-202
• /
• 2008

Formation of pores in melt processed ceramics oxides and its effect on the microstructure were studied. Spherical Pores with a size of a few tens of microns were formed due to the evolution of oxygen gas during melting of a oxide. The liquid pockets were converted into sperical oxide regions with a lower oxide density through the peritectic reaction during subsequent fabrication.

• 세라미스트
• /
• 제21권4호
• /
• pp.416-426
• /
• 2018

Water splitting is regarded as one of the most environmentally benign routes for hydrogen production. Nevertheless, the low energy efficiency to produce the hydrogen has been a critical bottleneck, which is attributable to the multi-electron and multi-step reactions during water splitting reaction. In this respect, the development of efficient, durable, and inexpensive catalysts that can promote the reaction is indispensable. Extensive searching for new catalysts has been carried out for past decades, identifying several promising catalysts. Recently, researchers have found that conventional battery materials; particularly high-voltage intercalation-based cathode materials, could exhibit remarkable performance in catalyzing the water splitting process. One of the unique capabilities in this class of materials is that the valency state of metals and the atomic arrangement of the structure can be easily tailored, based on simple intercalation chemistry. Moreover, taking advantage of the rich prior knowledge on the intercalation compounds can offer the unexplored path to identify new water splitting catalysts.

• Composites Research
• /
• 제32권6호
• /
• pp.355-359
• /
• 2019

고효율의 물 분해 시스템은 수소 발생 반응(HER)과 산소 발생 반응(OER) 각각에서의 촉매로 인한 전기화학적 반응에서의 효율로 인해 향상되는 높은 과전압의 감소가 수반되어야 한다. 그 중에서도 전이 금속 기반의 화합물(산화물, 황화물, 인화물, 그리고 질화물)은 현재 상용되고 있는 귀금속을 대체할 촉매 재료로써 주목받고 있다. 본 연구에서, 우리는 FESEM 분석을 통해 최적의 단분산된 Co₃[Co(CN)₆]₂ PBAs를 합성하고 XRD, FT-IR 분석을 통하여 결정성을 확인하고 TG-DTA를 통해 PBAs의 열적 거동을 확인하였다. 그리고 합성된 최적의 Co₃[Co(CN)₆]₂ PBAs를 열처리해서 단분산된 Co₃O₄나노 큐브를 합성하였고 XRD를 통해 이의 결정성을 확인하고 OER 측정을 진행하였다. 최종적으로 합성된 Co₃O₄ 나노 큐브는 10 mA·cm^-2의 전류 밀도에서 312 mV의 낮은 과전압과 96.6 mV·dec^-1의 낮은 Tafel slope을 보인다.

• 한국수소및신에너지학회논문집
• /
• 제34권6호
• /
• pp.575-580
• /
• 2023

An electrode was prepared by dip-coating NiFe₂O₄ powder on stainless steel (SUS) support for the application in the alkaline water electrolysis. The prepared electrode was analyzed using scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDXS), and was evaluated for the voltage properties with the change of current density in oxygen evolution reaction (OER) and hydrgen evolution reaction (HER) using 1, 3 and 7 M KOH solution. From the SEM and EDXS analysis, it was confirmed that the prepared electrode had NiFe₂O₄ on the SUS support. In OER and HER, the voltage in the 7 M KOH solution had a value of 1.35 and -1.90 V at 0.2 and -0.2 A/cm² of the current density, respectively. It was considered that the prepared electrode could be use as an electrode in the alkaline water electrolysis from the experimental results.

• 한국세라믹학회지
• /
• 제29권11호
• /
• pp.912-918
• /
• 1992

Microstructure evolution including morphological change in the vicinity of the electrodes, porosity change and grain boundary migration was observed in polycrystalline CoO subject to electric fields at 1100 and 121$0^{\circ}C$ in air. At the cathode, the transported cations react with oxygen in the surrounding to form new lattices, while, at the anode, the reverse reaction occurs leading to lattice annihilation. Lattice formation also takes place at the surface of pores near the cathode inducing pore-filling effect. Grain boundary migration was found bo be enhanced or retarded depending on the field direction. It is therefore implied that the driving force of grain boundary migration is the vectorial sum of the curvature-induced chemical potential gradient and the electric field applied.

• 한국수소및신에너지학회논문집
• /
• 제27권6호
• /
• pp.636-641
• /
• 2016

Alkaline water electrolysis is commercial hydrogen production technology. It is possible to operate MW scale plant. Because It used non-precious metal for electrode. But It has relatively low current density and low efficiency. In this study, research objective is development of anode for alkaline water electrolysis with low cost, high corrosion resistance and high efficiency. Stainless steel 316L (SUS 316L) was selected for a substrate of electrode. To improve corrosion resistance of substrate, Nickel (Ni) layer was electrodeposited on SUS 316L. Ni-Fe alloy was electrodeposited on the passivated Ni layer as active catalyst for oxygen evolution reaction(OER). We optimized preparation condition of Ni-Fe alloy electrodeposition by changing current density, electrodeposition time and composition ratio of Ni-Fe electrodeposition bath. This electrodes were electrochemically evaluated by using Linear sweep voltammetry (LSV) and Cyclic voltammetry (CV). The Ni-Fe alloy (Ni : Fe = 1 : 1) showed best activity of OER. The optimized electrode decreased overpotential about 40% at $100mA/cm^2$ compared with Ni anode.

• 한국재료학회지
• /
• 제33권10호
• /
• pp.377-384
• /
• 2023

Exploring earth-abundant, highly effective and stable electrocatalysts for electrochemical water splitting is urgent and essential to the development of hydrogen (H₂) energy technology. Iron-cobalt layered double hydroxide (FeCo-LDH) has been widely used as an electrocatalystfor OER due to its facile synthesis, tunable components, and low cost. However, LDH synthesized by the traditional hydrothermal method tends to easily agglomerate, resulting in an unstable structure that can change or dissolve in an alkaline solution. Therefore, studying the real active phase is highly significant in the design of electrochemical electrode materials. Here, metal-organic frameworks (MOFs) are used as template precursors to derive FeCo-LDH from different iron sources. Iron salts with different anions have a significant impact on the morphology and charge transfer properties of the resulting materials. FeCo-LDH synthesized from iron sulfate solution (FeCo-LDH-SO₄) exhibits a hybrid structure of nanosheets and nanowires, quite different from other electrocatalysts that were synthesized from iron chloride and iron nitrate solutions. The final FeCo-LDH-SO₄ had an overpotential of 247 mV with a low Tafel-slope of 60.6 mV dec^-1 at a current density of 10 mA cm^-2 and delivered a long-term stability of 40 h for the OER. This work provides an innovative and feasible strategy to construct efficient electrocatalysts.