• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.3353-3358
• /
• 2007

The present paper is devoted to investigate dynamic effect and steady-state performance of methane autothermal reformer theoretically and numerically. In order to simplify the complicated phenomena in the system, axisymmetric heterogeneous reactor model is developed. As autothermal reaction takes places on catalyst surface between bulk gas and catalyst, volume averaging method is incorporated using porous medium approach. To understand the start-up process which occurs in the reactor is highly important. Therefore, in this paper we get various goverining equations to find out transient and steady solutions and time scale for start-up introducing dimensionless variables. Start-up is a significant issue in reforming reaction for automobile system and fueling of SOFC-based auxiliary power units. This paper deals with characteristics of heat and mass transfer and predicted light-off time in the reformer as oxygen to carbon ratio ($O_2$/C) and amount of feeding gas.

• 대한화학회지
• /
• 제29권4호
• /
• pp.372-381
• /
• 1985

치환 8-퀴놀린올의 옥소몰리브덴(V)착물을 합성하고 착물의 원소분석, 자외선스펙트럼, 전자스펙트럼 및 전도도를 측정하였고 옥소몰리브덴(VI)착물과 함께 질량분석을 행하여 비교 검토하였다. 옥소몰리브덴(V) 착물은 비전해질이고 몰리브덴-산소의 신축진동은 $940cm^{-1}$ 부근에서 강한 흡수띠가 나타나고 결정장전이와 전하이동 전이가 일어났다. 질량분석 결과로 Mo(V, VI)착물에서 몰리브덴과 리간드의 조성이 1:2임을 확인할 수 있었고 옥소몰리브덴(VI)착물에서는 1:1조성의 착물의 질량수가 나타나지만 옥소몰리브덴(V)에서는 일부만 확인되었다.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2000년도 춘계학술발표대회
• /
• pp.141-144
• /
• 2000

Highly open porous polymer matrices are required for high density cell seeding, efficient nutrient, and oxygen supply to the cells cultured in the three dimensional matrices. However, there are severe problems of mass transfer limitations within the cell/scaffolds culture system. Thus we hypothesize that continuos-flow culture conditioning of cells with the scaffolds may improve the cell viability and the differentiated function. In this study, we fabricated porous PLGA scaffolds by using gas-foaming/salt-leaching method as previous described. Viscous PLGA gel paste contains ammonium bicarbonate particulates, acting as a gas-foaming agent as well as a salt-leaching porogen, were cast into Teflon mold and dried. Ammonium bicarbonate salt upon contact to an acidic aqueous solution evloves gaseous ammonia and carbon dioxide by itself. And we conjugated galactose moiety [AGA; $N-(aminobuty1)-O-{\beta}-D-galactopyranosyl-(1{\rightarrow}4)-D-glucoamide]$ to the terminal end group of a PLGA to increase the cell adhesion and matain the differentiated function of hepatocytes. Cell-seeded scaffolds were secured in a flow bioreactor chamber and exposed to continuous flow at 5 ml/min. As a result of our study, the high yield of hepatocytes attachment was accomplished by increasing the concentration of PLGA-AGA conjugate in polymer scaffolds and cells in the scaffolds under continuos flow condition maintained a high level of viability and albumin secretion rate of cultured hepatocytes showed a higher level that of control groups.

• 한국세라믹학회지
• /
• 제42권6호
• /
• pp.417-424
• /
• 2005

Although a lot of studies in fracture toughness of Y-TZP ceramics for structural applications have been done, it remains an important challenge to be able to improve fracture toughness of Y-TZP ceramics. In this research, milling method adding monoclinic zirconia and $Al_2O_3$ to 3Y-TZP was introduced to improve the fracture toughness of 3Y-TZP. Experimental results showed that addition of small amount of $Al_2O_3$ causes to make lots of oxygen vacancies (VO) by substituting $Al^{3+}$ for $Zr^{4+}$. It is believed that the produced vacancies provides useful routes far mass transfer. Y-TZP ceramics having higher microhardness and better fracture toughness was fabricated by sintering at $1400^{\circ}C$.

• 한국결정성장학회지
• /
• 제7권4호
• /
• pp.536-547
• /
• 1997

축방향으로 균일한 자장이 가하여진 Czochralski 도가니에서 도가니와 성장결정이 다양한 각속도로 회전하는 경우에 대하여 유동장, 온도장 및 산소의 농도장이 수치적으로 연구되었다. 도가니 벽의 가열에 의한 부력의 효과와 자유표면에서 온도차이에 의한 열모세관효과로 인한 용융물질의 유동은 도가니와. 성장결정의 회전에 따른 원심력에 의하여 차등적으로 억제될 수 있다. 이 원심력에 가장 큰 영향을 주는 인자는 도가니의 회전속도이며 이것이 초크랄스키 결정성장과정에서 속도장, 온도장, 농도장에 큰 영향을 주고 있다. 도가니의 회전속도가 작을 때에는 성장결정의 회전이 원심력을 효과적으로 발생시킨다.

• 센서학회지
• /
• 제20권6호
• /
• pp.363-367
• /
• 2011

This paper proposes a highly-sensitive gas flow sensor with a simple structure. The sensor is composed of a micro-heater for heating the gas medium and a pair of temperature sensors for detecting temperature differences due to gas flow in a sealed chamber on one axis. Operation of the gas flow sensor depends on the transfer of heat through the air medium. The proposed gas flow sensor has the capability to measure gas flow rates <5 $cm^3$/min with a resolution of approximately 0.01 $cm^3$/min. Furthermore, this paper reports some additional experiment results, including the sensitivity of the proposed gas flow sensor as a function of operating current and the flow of different types of gas(oxygen, carbon dioxide, and nitrogen). The fabrication process of the proposed sensor is very simple, making it a good candidate for mass production.

• 한국산학기술학회논문지
• /
• 제6권2호
• /
• pp.116-121
• /
• 2005

폐수 처리를 위한 PVA 포괄 고정화 담체의 특성에 관한 연구를 실시하였다. 특히 PVA의 고정화 조건에 따른 용해도의 영향, 첨가제가 PVA 물성에 미치는 영향, 제작된 PVA gel의 질산화 처리 효율을 살펴보았다. PVA gel 제작 과정 중 진공을 걸어줄수록 그리고 동결온도가 낮을수록 PVA gel의 용해도는 감소하였다. PAC와 같은 첨가제를 넣었을 때 PVA gel의 용해도는 감소하였고 특히 organoclay를 넣었을 때 PAC에 비하여 25% 낮은 용해도를 보였다. 질산화 효율면에서는 PVA로 코팅한 담체가 기존의 부착 담체에 비하여 용질과 산소 확산의 제한 때문에 질산화율이 낮게 관찰되었다.

• 한국유체기계학회 논문집
• /
• 제14권6호
• /
• pp.61-67
• /
• 2011

The study is to analyze the chemical and heat-flow reactions in the hydrogen generation unit(autothermal reformer), using computational numerical tools. Autothermal reformer(ATR) is involved in complex chemical reaction, mass and heat transfer due to exothermic and endothermic reactions. Therefore it is necessary to reveal the effects of various operation parameters and geometries on the ATR performance by using numerical analysis. Numerical analysis needs to dominant chemical reactions that includes Full Combustion(FC) reaction, Steam Reforming(SR) reaction, Water-Gas Shift(WGS) reaction and Direct Steam Reforming(DSR) reaction. The objective of the study is to improve theoretically the reformer design capability for the goal of high hydrogen production in the autothermal reformer using methane. Hydrogen production reached maximum in a certain value of Oxygen to Carbon Ratio(OCR) or Steam to Carbon Ratio(SCR). When the longitudinal distance to dimeter ratio(L/D) is increased, hydrogen production increases.

• KSBB Journal
• /
• 제5권1호
• /
• pp.25-35
• /
• 1990

In the Xanthan gum fermentation by Xanthomonas campestris there are problems of the large energy consumption by long fermentation time, the mass transfer of oxygen and nutrients by high viscous fermentation broth. In this study, the media optimization and the fed batch fermentation were carried out to decrease fermentation time and increase Xanthan gum yield. The $O_2$ uptake rate (OUR) and $CO_2$ evolution rate(CER) which were obtained from the analysis of fermentation exit gas using a gas chromatograph were investigated. As a result, the fermentation time decreased at optimal assimilable nitrogen concentration but increased at poor or rich assimilable nitrogen concentration, the Xanthan gum biosynthesis was stimulated under the limited condition of assimilable nitrogen source and the optimum fermentation medium was obtained as follow; Glucose=30g / l, Peptone=8.0g / l, $K_2HPO_4=2.0g/l$, $MgS0_47H_2O=10g/l$, Sodium acetate=20g/l, Sodium pyruvate=0.5g/1. As the agitation speed and nitrogen concentration increased, the $O_2$ uptake rate and $CO_2$ evolution rate increased. The OUR and CER were 37.3mmol $O_2/\;l$ hr and 20.2 mmol $CO_2/\;L$ hr at peptone 11g / l and agitation speed 990RPM, respectively. In fed batch fermentation, the final concentration of Xanthan gum was enhanced up to 29g / l.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제23회 추계학술대회 논문집
• /
• pp.178-183
• /
• 2004

액체산소 탱크 내에서의 열적 성층화(thermal stratification) 현상은 대기로부터의 열 투입과 탱크 내에서의 극저온 액체의 열적 비평형에 의해 발생된다. 열적 성층화 현상은 벤트 시스템, 탱크 단열. 펌프 설계에 영향을 미치게 되므로 정교한 해석 및 시험적 검증이 필요하다. 본 논문에서는 side-wall에서의 열 투입에 의해 발생되는 경계층 유동을 해석적 방법으로 1차원 모델링하여 시간에 따른 성충화 부피의 증가 및 탱크 내에서의 높이에 따른 온도 분포를 묘사한다.