• 한국전기전자재료학회논문지
• /
• 제17권5호
• /
• pp.467-475
• /
• 2004

ZnO epilayer were synthesized by the pulsed laser deposition(PLD) process on $Al_2$ $O_3$substrate after irradiating the surface of the ZnO sintered pellet by the ArF(193 nm) excimer laser. The epilayers of ZnO were achieved on sapphire(A $l_2$ $O_3$) substrate at a temperature of 400 $^{\circ}C$. The crystalline structure of epilayer was investigated by the photoluminescence and double crystal X-ray diffraction(DCXD). The carrier density and mobility of ZnO epilayer measured with Hall effect by van der Pauw method are 8.27${\times}$$10^{16}$$cm^{-3}$ and 299 $\textrm{cm}^2$/Vㆍs at 293 K, respectively. The temperature dependence of the energy band gap of the ZnO obtained from the absorption spectra was well described by the Varshni's relation, $E_{g}$(T)= 3.3973 eV - (2.69 ${\times}$ 10$_{-4}$ eV/K) $T^2$(T＋463k). After the as-grown ZnO epilayer was annealed in Zn atmospheres, oxygen and vaccum the origin of point defects of ZnO atmospheres has been investigated by the photoluminescence(PL) at 10 K. The native defects of $V_{Zn}$ , $V_{o}$ , Z $n_{int}$, and $O_{int}$ obtained by PL measurements were classified as a donors or accepters type. In addition, we concluded that the heat-treatment in the oxygen atmosphere converted ZnO thin films to an optical p-type. Also, we confirmed that vacuum in ZnO/A $l_2$ $O_3$did not form the native defects because vacuum in ZnO thin films existed in the form of stable bonds.s.s.s.

• 한국표면공학회지
• /
• 제34권5호
• /
• pp.486-493
• /
• 2001

Partially stabilized zirconia (PSZ) is an attractive material for thermal barrier coating. Zirconia exists in three crystallographic phases: cubic, tetragonal and monoclinic. Especially, the phase transformation of tetragonal phase to monoclinic phase accompanies significant volume expansion, so this transition generally results in cracking and contributes to the failure of the TBC system. Both the plasma sprayed ZrO$_2$-8Y$_2$O$_3$ (YSZ) coat and the ZrO$_2$,-25CeO$_2$,-2.5Y$_2$O$_3$ (CYSZ) coat are isothermally heat -treated at 130$0^{\circ}C$ and 150$0^{\circ}C$ for 100hr and cooled at different cooling rates. The monoclinic phase is not discovered in all the CYSZ annealed at 130$0^{\circ}C$ and 150$0^{\circ}C$. In the 150$0^{\circ}C$ heat-treated specimens, the YSZ contains some monoclinic phase while none exists in the 130$0^{\circ}C$ heat-treated YSZ coat. For the YSZ, the different phase transformation behaviors at the two temperatures are due to the stabilizer concentration of high temperature phases and grain growth. For the YSZ with 150$0^{\circ}C$-100hr annealing, the amount of monoclinic phase increased with the slower cooling rate. The extra oxygen vacancy, thermal stress, and c to t'phase transformation might suppress the t to m martensitic phase transformation.

• 한국분말재료학회지
• /
• 제20권2호
• /
• pp.114-119
• /
• 2013

In the DBC (direct bonding of copper) process the oxygen partial pressure surrounding the AlN/Cu bonding pairs has been controlled by Ar gas mixed with oxygen. However, the direct bonding of Cu with sound interface and good adhesion strength is complicated process due to the difficulty in the exact control of oxygen partial pressure by using Ar gas. In this study, we have utilized the in-situ equilibrium established during the reaction of $2CuO{\rightarrow}Cu_2O$ + 1/2 $O_2$ by placing powder bed of CuO or $Cu_2O$ around the Cu/AlN bonding pair at $1065{\sim}1085^{\circ}C$. The adhesion strength was relatively better in case of using CuO powder than when $Cu_2O$ powder was used. Microstructural analysis by optical microscopy and XRD revealed that the interface of bonding pair was composed of $Cu_2O$, Cu and small amount of CuO phase. Thus, it is explained that the good adhesion between Cu and AlN is attributed to the wetting of eutectic liquid formed by reaction of Cu and $Cu_2O$.

• Progress in Superconductivity
• /
• 제13권2호
• /
• pp.127-132
• /
• 2011

Many research groups have been manufacturing coated conductor by various processes such as PLD, MOD, and MOCVD, but the methods with production cost suitable for wide and massive application of coated conductor did not develop yet. Spray pyrolysis method adopting ultrasonic atomization was tried as one of the possible option. GdBCO precursor films have been deposited on IBAD substrate by spray pyrolysis method at low temperature and converted to GdBCO by post heat treatment. Ultrasonic atomization was used to generate fine droplets from precursor solution of Gd, Ba, and Cu nitrate dissolved in water. Primary GdBCO films were deposited at $500^{\circ}C$ and oxygen partial pressure of 1 torr. After that, the films were converted at various temperatures and low oxygen partial pressures. C-Axis oriented films were obtained IBAD substrates at conversion temperature of around $870^{\circ}C$ and oxygen partial pressures of 500 mtorr ~ 1 torr in a vacuum. Thick c-axis epitaxial film with the thickness of 0.4 ~ 0.5 ${\mu}m$ was obtained on IBAD substrate. C-axis epitaxial GdBCO films were successfully prepared by ex-situ methods using nitrate precursors on IBAD metal substrate. Converted GdBCO films have very dense microstructures with good grain connectivity. EDS composition analysis of the film showed a number of Cu-rich phase in surface. The precursor solution having high copper concent with the composition of Gd : Ba : Cu = 1 : 2 : 4 showed the better grain connectivity and electrical conductivity.

• 한국결정성장학회지
• /
• 제11권3호
• /
• pp.89-95
• /
• 2001

규소 결정의 용융 온도 근처인 $1350^{\circ}C$에서 Ar과 $O_{2}$gas를 이용하여 규소 wafer의 열처리시 vacancy ty[e 결함의 거동에 대해 알아보았다. 이 열처리에서는 wafer의 표면보다 wafer내부에서 결함의 용해속도가 매우 높음을 확인하였다. 이는 $1350^{\circ}C$에서는 규소내의 평형산소농도가 대부분의 CZ silicon에서의 산소농도보다 높아 산소의 understaturation현상과 silicon interstitial농도의 영향에 기인된 것으로 예상된다. 열처리 분위기의 영향을 알아보기 위하여 Ar과 $O_{2}$ 분위기에서 열처리한 결과 vacancy type 결함의 용해속도는 wafer의 내부에서는 차이가 없었고, wafer의 표면에서는 Ar이 $O_{2}$의 경우보다 결함의 용해속도가 높았다. $O_{2}$의 경우에는 표면산화막 성장시 유입된 silicon interstitial의 농도가 높아 결함의 용해속도가 떨어지는 것으로 판단된다. 이는 기존 연구에서 예상된 silicon interstitial이 vacancy cluster로 알려진 결정결함의 제거에 기여한다는 예상과는 상반된다. 본 연구의 결과 silicon interstitial의 존재는 void외부 산화막의 용해속도를 늦추어 결함 용해속도를 떨어뜨리는 것으로 예상된다.

• 한국재료학회지
• /
• 제31권6호
• /
• pp.320-324
• /
• 2021

Effects of growth variables and post-growth annealing on the optical, structural and electrical properties of magnetron-sputtered Ga_0.04Mg_0.10Zn_0.86O films are characterized in detail. It is observed that films grown from pure oxygen plasma showed high resistivity, ~10² Ω·cm, whereas films grown in Ar plasma showed much lower resistivity, 2.0 × 10^-2 ~ 1.0 × 10^-1 Ω·cm. Post-growth annealing significantly improved the electrical resistivity, to 4.3 ~ 9.0 × 10^-3 Ω·cm for the vacuum annealed samples and to 1.3 ~ 3.0 × 10^-3 Ω·cm for the films annealed in Zn vapor. It is proposed that these phenomena may be attributed to the improved crystalline quality and to changes in the defect chemistry. It is suggested that growth within oxygen environments leads to suppression of oxygen vacancy (Vo) donors and formation of Zn vacancy (V_Zn) acceptors, resulting in highly resistive films. After annealing treatment, the activation of Ga donors is enhanced, Vo donors are annihilated, and crystalline quality is improved, increasing the electron mobility and the concentration. After annealing in Zn vapor, Zn interstitial donors are introduced, further increasing the electron concentration.

• 한국재료학회지
• /
• 제3권2호
• /
• pp.111-120
• /
• 1993

플라즈마 아크 용해에 의해 0.31-1.14at%Hf과 0.08-1.00at%C의 조성을 갖는 Mo시편을 제조하여, 열처리에 따른 미세조직 변화를 광학현미경, AES(Auger Electron Spectroscopy)및 투과전자현미경(TEM)으로 조사하였다. 산소함량이 약 830ppm인 초기분말을 압분체로 성형하여 용해한 결과, 산소함량 약 40-130ppm의 시편으로 제조할 수 있었으며, 이때 Hf및 C의 첨가량이 증가할수록 시편의 결정립은 미세화되었다. Mo-1.14at% Hf-1.00at % C 조성의 시편을 열처리한 결과 130$0^{\circ}C$에서 결정립내의 편상의 ${\beta}$-Mo 탄화물(molybdenum carbide)이 열역학적으로 더욱 안정한 $\alpha$-Mo 탄화물로 변태되기 시작하고, 1400-150$0^{\circ}C$온도 구간에서는 급내에 의해 고용되어 있던 Hf과 C이 반응하여 미량의 Hf탄화물이 석출되었으며, 150$0^{\circ}C$에서는 결정립계에 Hf 탄화물이 편석되었다. 1500-170$0^{\circ}C$에서는 결정립계에 편석된 Hf탄화물이 분해되고 열역학적으로 더욱 안정한 Hf 산화물(Hafnium oxide)이 석출되었으며, 결정립내에도 미세한 Hf 산화물이 석출되었다.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2014년도 제49회 KOSCO SYMPOSIUM 초록집
• /
• pp.285-288
• /
• 2014

Experiments have been performed for the burners used in the non-oxidizing direct fired furnaces for the cold rolled plate to investigate the effect of fuel/air mixing patterns of the burner nozzle on flame shape, temperature and combustion gas concentration. CFD simulation has also been performed to investigate the mixing state of air-fuel for a nozzle mixing burner and a partially pre-mixing burner. A partially pre-mixing burner showed that flame temperature increased up to $26^{\circ}C$ on average compared than that of the nozzle mixing. It also showed that the mixing distance is important at the partially pre-mixing burner. Test results for a partially pre-mixing burner showed that the residual oxygen concentration and the volume ratio of $CO/CO_2$ of the flame were applicable to be used in field furnaces.

• 한국재료학회지
• /
• 제12권6호
• /
• pp.476-481
• /
• 2002

In this work, we report on the synthesis of the GaN powders from gallium oxide hydroxide (GaOOH) powders and on the structural and optical properties of them. Simple heat treatment of GaOOH in the flow of $NH_3$ gas leads to the formation of submicron hexagonal GaN powders even at the low reaction temperature of $800^{\circ}C$. XRD measurements show that the powders obtained are the single phase GaN. EDS, FTIR, and PL measurements indicate the oxygen-associated characteristics. It is shown from the low temperature PL measurement on GaN powders synthesized at $1000^{\circ}C$ that the shallow donor-acceptor recombination induced emission is more intense than the near band-edge excitonic emission.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1727-1732
• /
• 2008

We present a facile, yet versatile carbon nanofabrication method using electron beam lithography and resist pyrolysis. Various resist nanopatterns were fabricated using a negative electron beam resist, SAL-601, and were then subjected to heat treatment in an inert atmosphere to obtain carbon nanopatterns. Suspended carbon nanostructures were fabricated by wet-etching of an underlying sacrificial oxide layer. Free-standing carbon nanostructures, which contain 122 nm-wide, 15 nm-thick, and 2 ${\mu}m$-long nanobridges, were fabricated by resist pyrolysis and nanomachining processes. Electron beam exposure dose effects on resist thickness and pattern widening were studied. The thickness of the carbon nanostructures was thinned down by etching with oxygen plasma. An electrical biosensor utilizing carbon nanostructures as a conducting channel was studied. Conductance modulations of the carbon device due to streptavidin-biotin binding and pH variations were observed.