• 한국연소학회지
• /
• 제9권1호
• /
• pp.1-10
• /
• 2004

The results of a series of experiments executed by using two pilot-scale oxy-fuel burners are presented. The oxy-fuel burners are designed for maximum capacity of 50,000kcal/hr, 200,000kcal/hr and installed in the test furnace. The effects of turn-down ratio, excess oxygen ratio, nozzle exit velocity, injection angle, and swirl vane angle on the combustion characteristic are investigated. Temperature distributions are measured using R-type and Molybdenum sheathed C-type thermocouple at various points of the flame. The results showed that maximum temperature and mean temperature increase with the increase of turn-down ratio and momentum. The maximum flame temperature was increased about 35% compared to the case of equivalent air operated condition. In addition, optimum burner type, excess oxygen ratio and nozzle characteristics are obtained for this oxy-fuel glass melting furnace.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2015년도 제51회 KOSCO SYMPOSIUM 초록집
• /
• pp.65-68
• /
• 2015

Agreeable to the latest enviromental problem, CCS(Carbon Capture&Storage) technology is more significant. As these issues, Oxy-Combustion is one of the technology that realize the CCS technology and large scale field test proceeding at other places. The aims of this research were to evaluate the combustion characteristics of pressurized oxy-combusition that is attract attention as the next generation power plant. The experiments were conducted using a laboratory-scale pressuized oxy-combustor. The fuel used was low calorific value syn-gas that is mainly composed of CO(60%), $H_2$(27%). The burner was used co-axial burner, to investigate combustion characteristics, temperature in the reactor and the flue gas compositions were measured.

• Bulletin of the Korean Chemical Society
• /
• 제19권2호
• /
• pp.178-183
• /
• 1998

Carbon-13 CP-MAS NMR techniques were used to investigate dynamics of new combined type liquid crystalline polymers, poly[oxy-1,4-phenyleneoxy-2-{6-(4-(4-butylphenylazo)phenoxy)hexyloxy}terephthaloyl] and poly[oxy-1,4-phenyleneoxy-2-{10-(4-(4-butylphenylazo)phenoxy)decyloxy}terephthaloyl]. Noticeable mobility change of either aromatic groups or methylene groups is not detected between 25 ℃ and 82 ℃ from 13C spinlattice relaxation time in the rotating frame (T1ρ(C)) and contact time array experiments. However, line shape analysis shows the increase of mobility of methylene carbons in poly[oxy-1,4-phenyleneoxy-2-{6-(4-(4-butylphenylazo)phenoxy)hexyloxy}terephthaloyl] at higher temperature. The dynamics of side chanis does not seem to be affected in our experimental temperature range by the length of aliphatic chain which is connecting the side chain group to the main chain.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2004년도 제29회 KOSCI SYMPOSIUM 논문집
• /
• pp.175-180
• /
• 2004

Improving furnace efficiency is a high priority need for aluminum, glass, steel and other metal casting industries. Oxy-fuel combustion is considered to be one of the most effective method to improve thermal efficiency and reduce $NO_x$, SOx and $CO_2$ emissions for high temperature furnaces. The characteristics of an oxy-fuel flame, in particular its shape, radiation profile and exhaust gas composition are considerably different to those of an air-fuel burner. For this reason, a new approach is needed regarding factors such as burner design, power input levels, number and positioning strategies of burners and also control philosophies. In this paper will discuss the latest developments of high performance oxy-fuel combustion reheating furnace system. This high performance oxy-fuel combustion system will be shown to be technologically superior to other types of combustion systems in the areas of fuel efficiency, emissions and productivity.

• 농약과학회지
• /
• 제4권2호
• /
• pp.72-75
• /
• 2000

제초제 후부물질로서 3,4-Dimethyl-N-[4-chloro-2-fluoro-5-{(pyrazolylmethyl)oxy}phenyl]maleimide 유도체들과 또는 3,4,5,6-tetrahydro-N-[4-chloro-2-fluoro-5-{(pylazolylmethyl)oxy}phenyl]phthalimide 유도체들을 합성하여 제초활성을 온실조건에서 평가하였다. 이들 중 N-methyl-5-pyrazolylm-ethyloxy를 갖는 화합물들이 처리량 60 g/ha이하에서 이앙벼에 안전하면서 논피에 강한 제초활성을 나타내었다.

• Korean Chemical Engineering Research
• /
• 제56권5호
• /
• pp.631-640
• /
• 2018

에너지 공급 안정과 온실가스 저감이라는 목표를 달성하기 위해 저등급 석탄의 순산소 순환유동층 보일러의 적용이 새롭게 모색되고 있다. 아직까지 실증 단계의 개발이 진행되고 있기에 순산소 순환유동층 보일러에서의 저급탄 이용을 위해 주입 공기량, 조업 온도, 연료 공급량 등의 변화에 따른 연소 특성이 고찰되어야 상용 모델을 위한 설계 기준을 선정할 수 있다. 이에 본 연구에서는 공기 연소로 개발된 IEA-CFBC 모델을 순산소 연소를 전산모사하도록 개조하였고 새로운 순산소 순환유동층 모델을 이용하여 온도($800^{\circ}C{\sim}900^{\circ}C$), 산소 농도(21%~41%), 석탄 주입량, Ca/S 비율(1.5~4.0) 등의 다양한 조건에서 순산소 연소 특성을 고찰하였다. 공기 연소와 비교하여, 순산소 조건에서의 보일러 온도가 높았으나 산소 농도가 증가함에 따라 보일러의 온도구배는 감소하는 경향을 나타냈다. 더불어 Ca/S 비율, 산소농도가 높을수록 탈황 효율이 증가하는 것으로 나타났다.

• Korean Chemical Engineering Research
• /
• 제55권6호
• /
• pp.846-853
• /
• 2017

순환유동층 모사장치와 $30kW_{th}$급 파일럿 연소기를 활용하여 슬러지 순산소 유동층 연소특성을 살펴보았다. 순환유동층 모사실험에서 최소유동화속도($U_{mf}$)는 0.120 m/s로 계산되었고, 고속유동화를 위한 공탑속도는 2.5 m/s 이상으로 결정되었다. 파일럿 연소실험에서는 일반공기 및 21~40% 순산소 연소실험이 수행되었다. 배출가스 온도의 경우 21~25% 순산소 연소가 일반공기 및 30% 이상의 순산소 연소보다 상대적으로 높았다. 또한, 배출가스 중 $CO_2$ 배출농도가 21~25% 순산소 연소 범위에서 80% 이상으로 나타났다. 이를 고려한 전반적인 연소특성을 살펴 보았을 때 25% 순산소 연소가 본 슬러지 연료 연소에 대한 장시간 운전에 있어 보다 적합한 것으로 사료된다.

• Korean Chemical Engineering Research
• /
• 제57권3호
• /
• pp.400-407
• /
• 2019

순산소 순환유동층 연소기술은 기후변화 및 연료 수급 문제들을 해결할 수 있는 기술로 주목 받고 있다. 순산소 순환유동층 연소기술은 배기가스재순환 공정을 통해 이산화탄소를 비교적 쉽게 포집할 수 있으며 대기오염물질 배출도 줄일 수 있는 친환경 연소기술이다. 새롭게 개발된 $100kW_{th}$ 급 순산소 순환유동층 연소 시스템은 연료다변화에 대응하기 위해 다양한 연료들의 순산소연소 특성을 분석하고 있으며, 본 연구에서는 높은 고정탄소 및 회분함량으로 인해 연소성이 낮은 연료로 알려진 무연탄을 활용하여 높은 이산화탄소를 생산하고 연소효율을 향상시키고자 하였다. 그 결과로서, 무연탄 순산소 연소는 아역청탄 공기연소 대비, 연소효율이 2% 향상되었으며 대기오염물질인 $SO_2$, CO, NO은 각각 15%, 60%, 99% 감소하였다. 또한, 안정적인 순산소순환유동층 연소를 통해 배기가스 내 94 vol.% 이상의 $CO_2$ 가 포집될 수 있음을 확인하였다.

• 한국수소및신에너지학회논문집
• /
• 제28권1호
• /
• pp.30-39
• /
• 2017

Interests in fuel cell based power generation systems are on the steady rise owing to various advantages such as high efficiency, ultra low emission, and potential to achieve a very high efficiency by a synergistic combination with conventional heat engines. In this study, the performance of a hybrid system which combined a molten carbonate fuel cell (MCFC) and an indirectly fired micro gas turbine adopting carbon dioxide capture technologies was predicted. Commercialized 2.5 MW class MCFC system was used as the based system so that the result of this study could reflect practicality. Three types of ambient pressure hybrid systems were devised: one adopting post-combustion capture and two adopting oxy-combustion capture. One of the oxy-combustion based system is configured as a semi-closed type, while the other is an open cycle type. The post-combustion based system exhibited higher net power output and efficiency than the oxy-combustion based systems. However, the semi-closed system using oxy-combustion has the advantage of capturing almost all carbon dioxide.

• 대한기계학회논문집B
• /
• 제32권7호
• /
• pp.504-512
• /
• 2008

The characteristics of nonpremixed oxy-fuel flame in a multi-jet burner were experimentally and numerically investigated. The overall flow rate of fuel and oxygen was fixed, and the oxygen feeding ratio (OFR) was varied by 0.25, 0.5, and 0.75. The results of numerical simulation were compared with the measured results which are temperature profile and direct flame observation. The probability density function (PDF) model was applied accounting to the description between turbulence and chemistry, and standard ${\kappa}-{\varepsilon}$ model was used for turbulent flow field. Equilibrium assumption is very reasonable due to fast chemistry of the oxy-fuel combustion. Thus, the equilibrium calculation based on Gibbs free energy minimization was guaranteed to generate the solution of the oxy-fuel combustion. The result was obtained by numerical simulation. The predicted radial temperature profiles were in good agreement with the measured results. The flame length was shorten and was intensified with the decrease of OFR because the mixture of fuel and oxidizer are fast mixed and burnt. The maximum temperature became lower as the OFR increased, as a consequence of large flame surface area.