DOI QR코드

DOI QR Code

A Study on Oxy-Fuel Combustion System with Multi-Jet Burner-Numerical Simulation with PDF Combustion Model

다공 동축 버너를 이용한 순산소 연소 시스템에 관한 연구-PDF 연소 모델을 이용한 수치해석

  • 김현준 (한국과학기술원 기계공학과) ;
  • 최원영 (한국과학기술원 기계공학과) ;
  • 배수호 (한국과학기술원 기계공학과) ;
  • 홍정구 (한국과학기술원 기계공학과) ;
  • 신현동 (한국과학기술원 기계공학과)
  • Published : 2008.07.01

Abstract

The characteristics of nonpremixed oxy-fuel flame in a multi-jet burner were experimentally and numerically investigated. The overall flow rate of fuel and oxygen was fixed, and the oxygen feeding ratio (OFR) was varied by 0.25, 0.5, and 0.75. The results of numerical simulation were compared with the measured results which are temperature profile and direct flame observation. The probability density function (PDF) model was applied accounting to the description between turbulence and chemistry, and standard ${\kappa}-{\varepsilon}$ model was used for turbulent flow field. Equilibrium assumption is very reasonable due to fast chemistry of the oxy-fuel combustion. Thus, the equilibrium calculation based on Gibbs free energy minimization was guaranteed to generate the solution of the oxy-fuel combustion. The result was obtained by numerical simulation. The predicted radial temperature profiles were in good agreement with the measured results. The flame length was shorten and was intensified with the decrease of OFR because the mixture of fuel and oxidizer are fast mixed and burnt. The maximum temperature became lower as the OFR increased, as a consequence of large flame surface area.

Keywords

References

  1. Han Ji-Woong and Lee Chang-Eon, 2004, “Experimental and Numerical Investigations on Detailed Methane Reaction Mechanisms in Oxygen Enriched Conditions,” Transactions of the KSME (B), Vol. 28, No. 2, pp. 207-214 https://doi.org/10.3795/KSME-B.2004.28.2.207
  2. Han Ji-Woong, Kum Sung-Min and Lee Chang-Eon, 2005, “Investigation on Thermal and Chemical Effects of CO2 in Oxygen Enriched Flame,” Transactions of the KSME (B), Vol. 29, No. 5, pp. 617-624
  3. Lee Ki Yong, 2003, “Effects of Oxygen Enrichment on the Structure of $CH_4/CHCI_3/O_ 2/N_2$ Premixed Flames,” Transactions of the KSME (B), Vol. 27, No. 4, pp. 893 - 900 https://doi.org/10.3795/KSME-B.2003.27.7.893
  4. Kim Ho-Keun, Lee Sang-Min, Ahn Kook-Young and Kim Yong-Mo, “Combustion Characteristics for Varying Flow Velocity on Methane/Oxygen Diffusion Flames,” Transactions of the KSME(B), Vol. 29, No. 11, pp. 1277-1284, 2005 https://doi.org/10.3795/KSME-B.2005.29.11.1277
  5. Ahn Kook Young, Lee Sang Min and Lee Young Duk, 2006, “Application of Oxyfuel Combustion to Power Generation Systems,” SAREK, Winter Annual Conference, pp. 377 382
  6. Ahn Joon, Kim Hyouck Ju, Choi Kyu Sung, 2007, “Oxy-fuel Combustion Boiler for $CO_2$ capturing: 50 ㎾ Class Model Test and Numerical Simulation,” KSME, Spring Annual Conference, pp. 519-524
  7. Ahn Joon, Kim Hyouck Ju, Choi Kyu Sung, 2007, “Oxy-fuel FGR Combustion Boiler for $CO_2$ Capturing: 0.5 ㎿ Class Combustion Experiment,” KSME, Fall Annual Conference, pp. 124-129
  8. Kim H.S., Shin M.S., Cho J.Y., Chang D.S. and Lee D.G., 2007, “Combustion Characteristics of Pulverized Coal in an Oxygen Enriched Environment,” KOSAE, Environmental Societies Joint Conference, pp. 1761-1763
  9. CERC Workshop, Combustion Engineering Research Center, 2001-2007
  10. Charles K. Westbrook and Frederick L. Dryer, 1984, “Chemical Kinetic Modeling of Hydrocarbon Combustion,” Progress in Energy and Combustion Science, Vol. 10, No. 1, pp. 1 https://doi.org/10.1016/0360-1285(84)90118-7
  11. Liakos H. H., Founti M.A. and Markatos N.C., 2001, “The Effect of Pressure in Industrial Propane-oxygen Flames,” International Journal of Energy Research, Vol. 25, pp. 17-28 https://doi.org/10.1002/1099-114X(200101)25:1<17::AID-ER663>3.0.CO;2-N
  12. Liakos H. H., Founti M.A. and Markatos N.C.,, 2001, “Modeling the Characteristic Types and Heat Release of Stretched Premixed Impinging Flames,” Computational Mechanics, Vol. 27, pp. 88-96 https://doi.org/10.1007/s004660000220
  13. Liakos H. H., Koukou M. K., Founti M. A. and Markatos N.C., 2001, “Gaseous Fuel Assessment in Industrial Impinging Flames with Local Extinction Effects,” Computational Mechanics, Vol. 27, pp. 88-96 https://doi.org/10.1007/s004660000220
  14. Liakos H. H., Markatos N. C. and Founti M. A., 2002, “Energy Savings and Environmental Impacts from Fuel Substitution in Premixed Flame Process,” Clean Air, Vol. 3, pp.337-358 https://doi.org/10.1080/15614410215006
  15. Liakos H. H., Founti M.A. and Markatos N.C., 2000, “The Relative Importance of Combustion Mechanisms in Industrial Premixed Flames Under High Pressure,” Applied Thermal Engineering, Vol. 20, pp. 925-940 https://doi.org/10.1016/S1359-4311(99)00077-0
  16. Seo Jeong Il, Guahk Young Tae, Bae Soo Ho, Hong Jung Goo, Lee Uen Do, and Shin Hyun Dong, “Experimental Study on the Oxygen Combustion Characteristics with CO2 Feeding,” KOSCO, Vol. 10, No. 2, pp. 26-34, 2005
  17. Fluent User's Guide, Dec., 2001
  18. Jiang, Lei-Yong and Campbell, Ian, 2005, “A Critical Evaluation of NOx Modeling in a Model Combustor,” Journal of Engineering for Gas Turbines and Power, Vol. 127
  19. Ishii, T., Zhang, C. and Sugiyama, S., 1998, “Numerical Simulations of Highly Preheated Air combustion in an Industrial Furnace,” Transactions of the ASME, Vol. 120
  20. Ishii, T., Zhang, C. and Sugiyama, S., 2000, “Effects of NO Models on the Prediction of NO Formation in Regenerative Furnace,” Transactions of the ASME, Vol. 122
  21. Liu, F., Guo, H., Smallwood, Gulder, G.J., O.L. and Matovic, M.D., 2002, “A Robust and Accurate Algorithm of the $\beta$-pdf Integration and Its Application to Turbulent Methane-air Diffusion Combustion in a Gas Turbine Combustor Simulator,” International Journal of Thermal Science, Vol. 41, pp.763-772 https://doi.org/10.1016/S1290-0729(02)01370-4
  22. Poinsot Tierry and Veynante Denis, 2001, "Theoretical and Numerical Combustion," R.T. Edwards.Inc
  23. Coppalle A. and Vervish. P., 1983, “The Total Emmissivities of High Temperature Flames,” Combus. Flame, Vol. 49, pp.101-108 https://doi.org/10.1016/0010-2180(83)90154-2

Cited by

  1. Operational Characteristics of a Dry Electrostatic Precipitator for Removal of Particles from Oxy Fuel Combustion vol.34, pp.1, 2010, https://doi.org/10.3795/KSME-B.2010.34.1.27