• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.131-134
• /
• 2001

Vertically aligned carbon nanotubes are grown on iron-deposited silicon oxide substrates by thermal chemical vapor deposition of acetylene gas at the temperature range 750∼950$^{\circ}C$. As the growth temperature increases from 750 to 950$^{\circ}C$, the growth rate increases by 4 times and the average diameter also increases from 30 nm to 130 nm while the density increases progresively with the growth temperature and a higher degree of crystalline perfection can be achieved at 950$^{\circ}C$. This result demonstrates that the growth rate, diameter, density, and crystallinity of carbon nanotubes can be controlled with the growth temperature.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.295-295
• /
• 2006

In present study, poly(acrylic acid) (PAA) and hydrophobically modified poly(ethylene oxide) (HM-PEO) multilayers based on the hydrogen bonding between the component polymer pair have been prepared by the LbL deposition method. Dip assembled HM-PEO/PAA multilayers yield unique film morphologies in comparison with PEO/PAA multilayers due to the micellar formation of HM-PEO owing to the hydrophobic attraction between alkyl chains end-capped with the PEO chains. Individual HM-PEO micelles were connected through the bridging PEO chains to form temporary networks on multilayer surface and induced peculiar surface morphology on HM-PEO/PAA multilayers above the critical number of bilayers.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.601-605
• /
• 2009

The paper deals with the proper design of GGH(gas-gas heater) panel elements of desulfurization equipments in a thermoelectric power plant. When fossil fuels such as coal, petroleum et cetera are burnt to ashes, sulfur oxide compounds are produced, and calcareous sludges are deposited at GGH panel elements. In this case, operation of a power plant equipments is interrupted, and a tremendous economic loss comes into existence. One of the purposes of the paper is to find flow velocity distributions and regions of depositions when calcareous sludges pile up on the GGH panel elements through the fluid analysis. In the fluid analysis, flow velocity and position distributions of particles between GGH panel elements are demonstrated according to time variation for ammonia and calcium hydroxide particles.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2006년도 6th International Meeting on Information Display
• /
• pp.970-972
• /
• 2006

The surface of ITO in OLEDs was treated with $HfO_x$ deposition process using an atomic layer chemical vapor deposition system. The treatment at room temperature for 5 cycles exhibited significantly improved electroluminescent characteristics compared to the OLEDs without any treatment, which is believed to be caused by the increased holes injection efficiency.

• Transactions on Electrical and Electronic Materials
• /
• 제3권2호
• /
• pp.6-9
• /
• 2002

Indium tin oxide (ITO) films were deposited on unheated PET substrates by DC reactive magnetron sputtering of In-Sn (90-10 wt%) metallic alloy target. Electrical and optical properties of as-deposited films were systematically studied by control of the deposition parameters such as working pressure, DC power, and oxygen partial pressure. The figures of merit are important factors that summarize briefly the relationship between electrical and optical properties of transparent conducting films. The formulae of T/R$\_$sh/ and T$\^$10// R$\_$sh/ are expressed as a function of transmittance and sheet resistance. The best values of those figures of merit were approximately 38.6 and 8.95 ($\times$10$\^$-3/Ω$\^$-1/), respectively.

• Transactions on Electrical and Electronic Materials
• /
• 제5권4호
• /
• pp.153-157
• /
• 2004

ITO thin films were deposited on PET and soda-lime glass substrates by a dc reactive magnetron sputtering of In-Sn alloy metal target without substrate heater and post-deposition thermal treatment. The dependency of rf-bias voltage and substrate power during deposition processing was investigated to control the electrical and optical properties of ITO films. The range of rf bias voltage is from 0 to -80 V and the substrate power is applied from 10 to 50 W. The minimum resistivity of ITO film is 5.4${\times}$10$^{-4}$ $\Omega$cm at 50 W power and rf-bias voltage of -20 V. The best transmittance of ITO films at 550 nm wavelength is 91 % in the substrate power of 30 W and rf-bias voltage of -80 V.

• 한국결정성장학회지
• /
• 제22권5호
• /
• pp.213-217
• /
• 2012

Carbon coils could be synthesized on nickel catalyst layer-deposited silicon oxide substrate using $C_2H_2$ and $H_2$ as source gases under thermal chemical vapor deposition system. By the incorporation of $SF_6$ additive in cyclic modulation manner, the dominant formation of the nanosized carbon coils could be achieved with maintaining the minimized sulfur additive amount. The geometry variation of the as-grown carbon coils, such as linear type, microsized coil type, wavelike nanosized coil type, and nanosized coil type, were investigated according to the different cyclic modulation manner of $SF_6$ flow. $SF_6$ gas incorporation develops the coil-type geometry. Furthermore, the higher flow rate of $SF_6$ gas increased the amount of the nanosized carbon coils. The slightly increased etching ability by $SF_6$ addition seems to be the cause for these results.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2010년도 제39회 하계학술대회 초록집
• /
• pp.251-251
• /
• 2010

Organic-inorganic hybrid materials have attracted because of its combined properties, such as flexibility and high electrical performance. In addition, the hybrid materials are expected to have synergic effect which are not shown in just one component. Here, we fabricated organic-inorganic hybrid thin film. Organic-inorganic hybrid thin film have been deposited from diethyl zinc and 1, 2, 4-trihydroxybenzene (THB) by molecular layer deposition (MLD). UV-VIS, Using Infrared spectrum and X-ray photoelectron spectroscopy confirm that Zinc and THB hybrid film (ZnTHB) consist of Zn-O and THB - oxide units and the micro structure and composition of hybrid film. hat the sequential surface reactions of diethyl zinc and ethylene glycol are sufficiently self-limiting and saturating to enable well-controlled MLD growth. Transmission electron microscopy image shows lamination growth of ZnTHB film according to cycle.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.329.1-329.1
• /
• 2014

In this paper, we report electrical, optical and structural properties of Al-doped zinc oxide (AZO) thin films deposited at different substrate temperatures and pressures. The films were prepared by radio frequency (RF) magnetron sputtering on glass substrates in argon (Ar) ambient. The X-ray diffraction analysis showed that the AZO films deposited at room temperature (RT) and 20 Pa were mostly oriented along a-axis with preferred orientation along (100) direction. There was an improvement in resistivity ($3.7{\times}10^{-3}{\Omega}-cm$) transmittance (95%) at constant substrate temperature (RT) and working pressure (20 Pa) using the Hall-effect measurement system and UV-vis spectroscopy, respectively. Our results have promising applications in low-cost transparent electronics, such as the thin-film solar cells and thin-film transistors due to favourable deposition conditions. Furthermore our film deposition method offers a procedure for preparing highly oriented (100) AZO films.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.398-401
• /
• 2001

Indium tin oxide films were deposited on unheated PET substrates by DC reactive magnetron sputtering of In-Sn (90-10 wt%) metallic alloy target. Electrical and optical properties of as-deposited films were systematically studied by control of the deposition parameters such as working pressure, DC power, and oxygen partial pressure. The figures of merit are important factors that summarize briefly the relationship between electrical and optical properties of transparent conducting films. The formulae of $T/R_{sh}$ and $T^{10}/R_{sh}$ are expressed as a function of transmittance and sheet resistance. The best values of those figures of merit were approximately 38.6 and $8.95({\times}10^{-3}\Omega^{-1})$ respectively.