• 한국대기환경학회지
• /
• 제1권1호
• /
• pp.43-51
• /
• 1985

This study is concerned with the oxidation of carbon monoxide on platinum and platinum-palladium catalysts. Catalysts were made by the impregnation method and flow reactor was used in the catalytic reaction. As for the mixed gases, carbon monoxide concentration varied from 1 to 4% and that of oxygen from 1 to 4%. $N_2$ was used as carrier gas and GHSV varied from 24, 000 $h^{-1} to 60, h^{-1}$. The temperature range was from 200 to $600^\circ$C. It was also taken into consideration that the heat and mass transfer resistance of our catalysts was negligible in the study. Experimental results showed that platinum-palladium catalyst was about 1.5-3.9% superior to platinum catalyst in conversion yield. When we used platinum-palladium catalyst, we observed that carbon monoxide oxidation was found to be 1 st order with respect to carbon monoxide concentration. Activation energy of the catalyst was 23.5 kcal/mol.

• 한국대기환경학회지
• /
• 제14권4호
• /
• pp.313-320
• /
• 1998

The most desirable diesel oxidation catalyst (DOC) should have the properties of oxidibing CO and HC effectively at low exhaust gas temperature while minimizing the formation of sulfate at high exhaust gas temperature. Precious metals such as platinum and palladium have been known to be sufficiently active for oxidizing CO and HC and also to have high activity for the oxidation of sulfur dioxide (SO2) to sulfor trioxide (SO3). There is a need to develop a highly selective catalyst which can promote the oxidation of CO and HC efficiently, but, on the other hand, suppress the oxidation of SO2. One approach to solve this problem is to load a base metal such as vanadium in Pt-based catalyst to suppress sulfate formation. In this study, a Pt-V catalyst was prepared by impregnating platinum and vanadium onto a Ti-Si wash coated catalyst in a laboratory reactor by changing the formulations and reaction temperatures.

• 대한화학회지
• /
• 제67권6호
• /
• pp.415-419
• /
• 2023

In this study, we report the one-pot synthesis of reduced graphene oxide (rGO) containing platinum nanoparticles with catalytic activity to break down hydrogen peroxide as a peroxidase-mimicking catalyst. A single reducing agent was used to reduce graphene oxide and a platinum precursor at a moderately low temperature of 70℃. The rGO was homogeneously decorated with platinum nanoparticles. The catalytic activity of Pt-rGO was investigated for the oxidation of 3,3',5,5'- tetramethylbenzidine (TMB), a peroxidase substrate, in the presence of hydrogen peroxide. The Pt-rGO coupled with glucose oxidase was also able to detect glucose at millimolar concentrations (up to 1 mM). Our results show that the Pt-rGO composite is a promising catalyst for the detection of hydrogen peroxide. This method was also applied for the detection of glucose.

• 공업화학
• /
• 제31권4호
• /
• pp.368-376
• /
• 2020

본 연구에서는 SO₂를 제어하기 위한 산화 촉매에서 platinum (Pt)을 활성금속으로 하는 촉매의 반응특성에 관한 분석을 수행하였다. Titania (TiO₂) 지지체에 다양한 precursor 형태의 Pt를 사용하여 Pt/TiO₂ 촉매를 제조하여 실험에 사용하였다. Pt/TiO₂ 상의 Pt²⁺ 또는 Pt⁴⁺와 같은 Pt valence state에 따른 SO₂ 산화의 성능 차이는 나타나지 않으며, PtCl_x과 같은 Pt chloride species는 전체적으로 SO₂ 산화 성능을 감소시킨다. 또한, XPS 분석을 수행하여 SO₂ 산화 반응 전/후의 촉매상의 valence state를 분석한 결과 SO₂ 산화반응 이후 lattice oxygen의 감소 및 surface chemisorbed oxygen의 증가를 확인할 수 있다. 따라서 Pt/TiO₂ 촉매의 SO₂의 산화 반응은 PtOx에 해당하는 lattice oxygen의 반응과 oxygen vacancy에 의한 산화-환원 반응이 진행되는 Mar-Van Krevelen 메커니즘이 주요한 SO₂ 산화 반응임을 판단할 수 있으며, 이러한 결과를 통하여 촉매 상에 존재하는 PtOx (Pt²⁺ 또는 Pt⁴⁺)의 oxygen species가 주요한 활성 site로 작용함을 확인할 수 있다.

• 한국대기환경학회지
• /
• 제13권6호
• /
• pp.487-495
• /
• 1997

The most desirable diesel oxidation catalyst (DOC) should have the properties of oxidizing CO, HC and SOF effectively at low exhaust gas temperature while minimizing the formation of sulfate at high exhaust gas temperature. Precious metals such as platinum and palladium have been known to be sufficiently active for oxidizing SOF and also to have high activity for the oxidation of sulfur dioxide $(SO_2)$ to sulfur trioxide $(SO_3)$. There is a need to develop a highly selective catalyst which can promote the oxidation SOF efficiently, on the other hand, suppress the oxidation of $SO_2$. In this study, a Pt-V catalyst was prepared by impregnating platinum and vanadium onto a Ti-Si wash coated ceramic monolith substrate. A prepared Pt-V catalytic converter was installed on a heavy duty diesel engine and the effect of fuel sulfur on particulate matter (PM) of heavy duty diesel engine was measured. The effect of fuel sulfur on PM of Pt-V was also compared with that of a commercialized Pt catalyst currently being used in some of the heavy duty diesel engines in advanced countries. Only 1 $\sim$ 3% of sulfur in the diesel fuel was converted to sulfate in PM for the engine without catalyst, but almost 100% of sulfur conversion was achieved for the engine with Pt catalyst at maximum loading condition. In the case of Pt-V catalyst, there was no big difference in conversion with the base engine even at maximum loading condition. The reason of SOF increase according to the increase of suflate emission was identified as the washing off effect of bound water in sulfate.

• 한국환경과학회지
• /
• 제18권10호
• /
• pp.1071-1077
• /
• 2009

A novel pretreatment technique was applied to the conventional Pt/alumina catalyst to prepare for the highly efficient catalyst for the preferential oxidation of carbon monoxide in hydrogen-rich condition. Their performance was investigated by selective CO oxidation reaction. CO conversion with the oxygen-treated Pt/Alumina catalyst increased remarkably especially at the low temperature below $100^{\circ}C$. This result is promising for the normal operation of the proton exchange membrane fuel cell (PEMFC) without CO poisoning of the anode catalyst. XRD analysis results showed that metallic Pt peaks were not observed for the oxygen-treated catalyst. This implies that well dispersed small Pt particles exist on the catalyst. This result was continued by high resolution transmission electron microscopy (HRTEM) analysis. Consequently, it can be concluded that highly dispersed Pt nanoparticles could be prepared by the novel pretreatment technique and thus, CO conversion could be increased considerably especially at the low temperatures below $100^{\circ}C$.

• 자원리싸이클링
• /
• 제27권3호
• /
• pp.93-99
• /
• 2018

본 연구에서는 디스플레이 산업의 백금 폐스크랩을 용해, 용매추출을 통하여 백금족 성분을 효율적으로 추출하고, 추출된 백금용액을 디젤자동차 배가스 정화촉매용 전구체 용액으로서 제조하고, 그 촉매활성을 실험하였다. 용액화학적 이론 연구를 통하여 백금 화학종의 수용액상 거동을 조사하였고, 화학종들의 존재영역 및 거동을 근거로 추출 및 분리 가능방안을 수립하였다. 전기화학적 방법에 의해 폐스크랩을 용해시킴으로써, 용해시간 단축 및 추출효율을 높였으며, 로듐 성분을 분리 제거, TBP에 의한 용매추출, 염산에 의한 탈거 공정을 거쳐 Pt-Chloride-$H_2O$ 계 백금용액을 용액을 제조하고, 이 용액을 원료로 액상 아민화 반응을 통해 아민산 백금용액을 제조한 다음, 카본블랙의 연소반응에 대한 촉매 활성을 실험함으로써, 백금족 폐스크랩으로부터 고부가 백금족 화합물의 제조가능성을 연구하였다.

• Korean Chemical Engineering Research
• /
• 제56권5호
• /
• pp.752-760
• /
• 2018

경유자동차에서 배출되는 탄소 입자상 물질 연소 온도구간을 낮추는 것은 미세먼지 배출 저감과 내연기관 자동차의 고연비 저배출 성능 구현이라는 측면에서 매우 중요한 기술적 과제 중 하나이다. 본 논문에서는 탄소 입자상 물질의 산화를 위해 오존을 산화제로 이용하고 백금계 산화촉매를 동시에 적용했을 때 관찰되는 $150^{\circ}C$ 부근 저온영역에서의 탄소 입자상 물질 연소반응에 관하여 논했다. 백금계 산화촉매를 적용했을 때 오존에 의한 탄소 입자상 물질의 산화속도를 크게 개선시키지 못했지만 연소반응의 이산화탄소 선택도를 향상시켰으며, 탄소 입자상 물질의 선택적 산화를 위해 고려된 NO의 $NO_2$로의 사전 전환($NO_2$-rich 조건)은 $NO_2$와 오존의 상호 상승작용에 의해 $150^{\circ}C$ 부근 온도영역에서의 탄소상 입자물질 연소성능을 높이는데 효과가 있었다.

• 한국대기환경학회:학술대회논문집
• /
• 한국대기환경학회 2005년도 추계학술대회 논문집
• /
• pp.478-480
• /
• 2005

• 환경위생공학
• /
• 제16권1호
• /
• pp.66-71
• /
• 2001

The objective of this study was to depict the kinetic behavior of the platinum catalyst for the deep oxidation of aromatic solvents and their binary mixtures. The oxidation kinetics of aromatic solvents, which were benzene, toluene and m-xylene, was studied on a 0.5% $Pt/{\gamma}-Al_2O_3$ catalyst. Deep oxidation of binary mixtures, which were 1:1 in volume, was carried out and the inlet concentration was controlled in the range of 133 and 333ppmv. An approach based on the two-stage redox model was used to analysis the results. The deep oxidation conversion of aromatic solvents was inversely proportional to inlet concentration in plug flow reactor. This trend is due to the zeroth-order kinetics with respect to inlet concentration. The kinetic parameters of multicomponent model were independently evaluated from the single compound oxidation experiments. A simple multicomponent model based on two-stage redox rate model made reasonably good predictions of conversion over the range of parameters studied.