• Applied Biological Chemistry
• /
• v.37 no.6
• /
• pp.472-479
• /
• 1994

This study was conducted to determine the effective removal method of THMs and humic material in drinking water when the doses of oxidants, coagulants, and activated carbon, and the points of oxidants treatment were changed in the drinking water treatment process. The inhibition of THMs formation and the removal of humic matter were more effectively achieved by $ClO_2$ than by other oxidants, $Cl_2,\;NH_2Cl,\;KMnO_4\;and\;O_3$. By changing the point of oxidant treatment, the formation of THMs was reduced by about 36.7 to 8.2% on treatment after coagulation, but the content of humic matter was not affected. The coagulation efficiency of alum and ferric sulfate to coagulate organic materials in water was affected by the molecular weight of humic matter in drinking water. The treatment of activated carbon after filtration was found to be more effective than that before oxidation in inhibiting THMs formation and removing THMs.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.21 no.3
• /
• pp.82-87
• /
• 2013

In this work, the 1L grade integrated metal DOC/DPF filter that can install in engine manifold position was developed to investigate the effect of platinum-coating amount of filter on the improvement of filter activation temperature and reduction of particulate matter (PM). This filter was installed in 2.9L CI engine which meets the EURO-4 emission regulation. Tests for PM reduction efficiency of filter were conducted under ND-13 mode with full-load test condition. It was revealed that the time to reach the activation temperature of metal filter ($280^{\circ}C$) was shorter as the amount of platinum-coating increased. This short activation time can be helpful for the reduction of CO and HC emissions during cold start condition. At the same time, PM reduced as the coating amount increased. The reduction percentage of $DOC_{40}$, $DOC_{20}$, and $DOC_0$ were 96.7% (2.34 mg/kW'h), 95.1% (3.47 mg/kW'h), and 94.5% (3.69 mg/kW'h) compared to previous result (71.4 mg/kW'h), respectively.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.3
• /
• pp.487-494
• /
• 2017

Since nitrate nitrogen is quite stable in aqueous solution, considerable skill is required to remove it. Low concentrations of nitrate nitrogen are easily removed, while high concentrations of nitrate nitrogen are difficult to remove. This study is to show that nitrate nitrogen in the form of gaseous nitrogen can be removed by using zinc ball with a diameter of about 3mm and to test the removal characteristics of nitrate nitrogen under various reaction conditions. As a result of this study, the treatment efficiency of nitrate nitrogen by continuous treatment with zinc ball was about 80%. However, there is a problem that the wastewater must be maintained in an acidic atmosphere of about pH 2, and the treated wastewater must be neutralized and discharged.

• Journal of the Korean Applied Science and Technology
• /
• v.35 no.3
• /
• pp.612-621
• /
• 2018

In this study, $TiO_2$ nanotube plate and metal electrodes(Copper, Nickel, Stainless Steel, Aluminum, Tin, Titanium) were compared on cathodic reduction of nitrate ($NO_3{^-}-N$) during electrolysis. The electrochemical characteristics were compared based on electrochemical impedance spectroscopy (EIS). The surface morphology was obtained using scanning electron microscopy (SEM) method. Brunauer-Emmett-Teller (BET) method was implemented for the specific surface area analysis of the cathodes. To study kinetics, 90 minute batch electrolysis of nitrate solution was performed for each cathodes. In conclusion, under the condition of relatively low ($0.04 A\;cm^{-2}$) current density, $TiO_2$ nanotube plate showed no surface corrosion during the electrolysis, and the reaction rate was measured the highest in the kinetic analysis.

• Advances in environmental research
• /
• v.7 no.2
• /
• pp.139-159
• /
• 2018

Green Leaf Volatiles (GLVs) is a class of biogenically emitted oxygenated hydrocarbons that have been identified as a potential source of Secondary Organic Aerosols (SOA) via aqueous oxidation. The physico-chemical properties of GLVs are vital to understanding their fate and transport in the atmosphere via fog processing, but few experimental data are available. We studied the aqueous solubility, 1-octanol/water partition coefficient, and Henry's law constant ($K_H$) of five GLVs at $25^{\circ}C$: methyl jasmonate, methyl salicylate, 2-methyl-3-buten-2-ol, cis-3-hexen-1-ol, and cis-3-hexenyl acetate. Henry's law constant was also measured at temperatures and ionic strengths typical of fog. Experimental values are compared to scarcely-available literature values, as well as estimations using group and bond contribution methods, property-specific correlations and molecular dynamics simulations. From these values, the partition coefficients to the air-water interface were also calculated. The large Henry's law constant of methyl jasmonate ($8091{\pm}1121M{\cdot}atm^{-1}$) made it the most significant GLV for aqueous phase photochemistry. The HENRYWIN program's bond contribution method from the Estimation Programs Interface Suite (EPI Suite) produced the best estimate of the Henry's constant for GLVs. Estimations of 1-octanol/water partition coefficient and solubility are best when correlating an experimental value of one to find the other. Finally, the scavenging efficiency was calculated for each GLV indicating aqueous phase processing will be most important for methyl jasmonate.

• Journal of Microbiology and Biotechnology
• /
• v.26 no.3
• /
• pp.511-520
• /
• 2016

The most energy-demanding step of wastewater treatment is the aeration-dependent elimination of organic carbon. Microbial fuel cells (MFCs) offer an alternative strategy in which carbon elimination is conducted by anaerobic microorganisms that transport respiratory electrons originating from carbon oxidation to an anode. Hence, chemical energy is directly transformed into electrical energy. In this study, the use and stability of barcode-containing exoelectrogenic model biofilms under non-axenic wastewater treatment conditions are described. Genomic barcodes were integrated in Shewanella oneidensis, Geobacter sulfurreducens, and G. metallireducens. These barcodes are unique for each strain and allow distinction between those cells and naturally occurring wild types as well as quantification of the amount of cells in a biofilm via multiplex qPCR. MFCs were pre-incubated with these three strains, and after 6 days the anodes were transferred into MFCs containing synthetic wastewater with 1% wastewater sludge. Over time, the system stabilized and the coulomb efficiency was constant. Overall, the initial synthetic biofilm community represented half of the anodic population at the end of the experimental timeline. The part of the community that contained a barcode was dominated by G. sulfurreducens cells (61.5%), while S. oneidensis and G. metallireducens cells comprised 10.5% and 17.9%, respectively. To the best of our knowledge, this is the first study to describe the stability of a synthetic exoelectrogenic consortium under non-axenic conditions. The observed stability offers new possibilities for the application of synthetic biofilms and synthetically engineered organisms fed with non-sterile waste streams.

• Environmental Engineering Research
• /
• v.19 no.1
• /
• pp.9-14
• /
• 2014

Fenton reaction with zerovalent iron (ZVI) and $Fe^{2+}$ ions was studied to treat pharmaceutical wastewaters (PhWW) including antibiotics and non-biodegradable organics. Incremental biodegradability was assessed by monitoring biochemical oxygen demand (BOD) changes during Fenton reaction. Original undiluted wastewater samples were used as collected from the pharmaceutical factory. Experiments were carried out to obtain optimal conditions for Fenton reaction under different $H_2O_2$ and ion salts (ZVI and $Fe^{2+}$) concentrations. The optimal ratio and dosage of $H_2O_2$/ZVI were 5 and 25/5 g/L (mass basis), respectively. Also, the optimal ratio and dosage of $H_2O_2/Fe^{2+}$ ions were 5 and 35/7 g/L (mass basis), respectively. Under optimized conditions, the chemical oxygen demand (COD) removal efficiency by ZVI was 23% better than the treatment with $Fe^{2+}$ ion. The reaction time was 45 min for ZVI and shorter than 60 min for $Fe^{2+}$ ion. The COD and total organic carbon (TOC) were decreased, but BOD was increased under the optimal conditions of $H_2O_2$/ZVI = 25/5 g/L, because organic compounds were converted into biodegradable intermediates in the early steps of the reaction. The BOD/TOC ratio was increased, but reverse-wise, the COD/TOC was decreased because of generated intermediates. The biodegradability was increased about 9.8 times (BOD/TOC basis), after treatment with ZVI. The combination of chemical and biological processes seems an interesting combination for treating PhWW.

• Fisheries and Aquatic Sciences
• /
• v.15 no.4
• /
• pp.265-273
• /
• 2012

The effects of processing and frozen storage conditions on the quality of anchovy Engraulis japonica fried surimi gels were investigated. Protein content decreased after surimi gel processing from 19.6% (raw meat) to 12.1% (kamaboko) due to the added ingredients and change in water content. Lipid content decreased from 2.8% (raw meat) to 1.3% in minced and 0.5% in surimi, but fried kamaboko showed a 6.9 % lipid level. Thiobarbituric acid values and thiobarbituric acid reactive substances levels were highest in kamaboko samples, 89.5 and 1.9 mg/g solid, and increased gradually with storage time to 101.8 and 4.6 mg/g solid, respectively. In vitro protein digestibility increased from 79.2% in raw anchovy to 88.5% in kamaboko samples. Levels of trypsin inhibitor decreased gradually with processing and during storage time from 2.43 in raw anchovy to 0.31 mg/g solid in the kamaboko sample after 60 days of frozen storage. No noticeable changes in total essential amino acid was observed during processing conditions. Computed protein efficiency ratio for kamaboko was highest (2.59) compared with whole anchovy (1.96), minced (1.94) and surimi (2.50). Fresh fried anchovy kamaboko showed similar values of hardness, springiness, gumminess and chewiness to commercial surimi gel, but a higher values were seen for fracturability and adhesiveness, and lower values for cohesiveness and resilience. The frozen and thawed anchovy kamaboko showed higher values for all of these rheological parameters compared with fresh and commercial kamaboko. Anchovy kamaboko showed the lowest lightness (62.9) and redness (0.16) and similar yellowness (11.9) compared with commercial kamaboko. Frozen storage and vacuum packaging were effective maintaining the shelf life of anchovy kamaboko within 30 days, but were not effective after 45 days due to fat oxidation.

• Archives of Pharmacal Research
• /
• v.28 no.6
• /
• pp.722-729
• /
• 2005

With the aim to improve the specificity and to reduce the cytotoxicity of polyethylenimine (PEI), we have synthesized the conjugates of the branched PEI (25 kDa) with transferrin. The trans-ferrin-PEI (TP) conjugates with five compositions were synthesized using periodate oxidation method and confirmed by FT-IR spectroscopy and gel permeation chromatography. The free amine contents of TP conjugates, which were able to condense and deliver DNA, increased as the amount of PEI increased. TP/DNA polyplexes were characterized by measuring gel elec-trophoresis, ethidium bromide fluorescence quenching, particle size and zeta potential of complexes. Complete complexation of the polyplexes was observed above the N/P ratio of 5 in TP/DNA, and above 3 in PEI/DNA, respectively. The zeta potential of the complexes decreased as the amount of transferrin in TP conjugates increased. Transfection efficiency of TP conjugates was evaluated in HeLa cell and Jurkat cell systems. Among the five compositions of TP conjugates, TP-2 system mediated a higher $\beta$-galactosidase gene expression than PEI system in Jurkat cell which was known to express elevated numbers of transferrin receptors. From the results of the cell viability based on MTT assay, TP conjugates showed lower cytotoxicity com-pared with the PEI system. We expect that the TP conjugate can be used efficiently as a non-viral gene delivery vector.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2011.05a
• /
• pp.1.1-1.1
• /
• 2011

Printed electronics based on the direct writing of solution processable functional materials have been of paramount interest and importance. In this talk, the synthesis of printable inorganic functional materials (conductors and semiconductors) for thin-film transistors (TFTs) and photovoltaic devices, device fabrication based on a printing technique, and specific characteristics of devices are presented. For printable conductor materials, Ag ink is designed to achieve the long-term dispersion stability and good adhesion property on a glass substrate, and Cu ink is sophisticatedly formulated to endow the oxidation stability in air and even aqueous solvent system. The both inks were successfully printed onto either polymer or glass substrate, exhibiting the superior conductivity comparable to that of bulk one. In addition, the organic thin-film transistor based on the printed metal source/drain electrode exhibits the electrical performance comparable to that of a transistor based on a vacuum deposited Au electrode. For printable amorphous oxide semiconductors (AOSs), I introduce the noble ways to resolve the critical problems, a high processing temperature above $400^{\circ}C$ and low mobility of AOSs annealed at a low temperature below $400^{\circ}C$. The dependency of TFT performances on the chemical structure of AOSs is compared and contrasted to clarify which factor should be considered to realize the low temperature annealed, high performance AOSs. For photovoltaic application, CI(G)S nanoparticle ink for solution processable high performance solar cells is presented. By overcoming the critical drawbacks of conventional solution processed CI(G)S absorber layers, the device quality dense CI(G)S layer is obtained, affording 7.3% efficiency CI(G)S photovoltaic device.