• 한국수소및신에너지학회논문집
• /
• 제14권4호
• /
• pp.298-304
• /
• 2003

The thermal behavior of $NiFe_2O_4$ prepared by a solid-state reaction was investigated for $H_2$ generation by the thermochemical cycle. The reduction of $NiFe_2O_4$ started from $800^{\circ}C$, and the weight loss was 0.2-0.3 wt% up to $1000^{\circ}C$. In the $H_2O$ decomposition reaction, $H_2$ was generated by oxidation of reduced $NiFe_2O_4$. The crystal structure of $NiFe_2O_4$ maintained during the redox reaction of 5 cycles. From this observation, the lattice oxygen in $NiFe_2O_4$ is released without the structural change during the thermal reduction and oxygen deficient $NiFe_2O_4$ can be restored to the spinel structure of $NiFe_2O_4$.

• 한국세라믹학회지
• /
• 제41권2호
• /
• pp.97-101
• /
• 2004

W $O_{x}$-based semiconductor type thin film gas sensor was fabricated for the detection of N $O_{x}$ by reactive d.c. sputtering method. The relative oxidation state of the deposited W $O_{x}$ films was approximately compared by the calculation of the difference of the binding energy between Ols to W4 $f_{7}$2/ core level XPS spectra in the standard W $O_3$ powder of known composition. As the annealing temperature increased from 500 to 80$0^{\circ}C$, relative oxygen contents and grain size of the sputtered films were gradually increased. As the results of sensitivity ( $R_{gas}$/ $R_{air}$) measurements for the 5 ppm N $O_2$ gas, the sensitivity was 110 and the sensor showed recovery time as fast as 200 s. The other sensor properties were examined in terms of surface microstructure, annealing temperature, and relative oxygen contents. These results indicated that the W $O_3$ thin film with well controlled structure is a good candidate for monitoring and controlling of automobile exhaust.haust.t.t.t.

• 한국세라믹학회지
• /
• 제45권5호
• /
• pp.268-275
• /
• 2008

In high temperature ceramic glazes, a stable range of pink-red colors producing $Cr_2O_3-SnO_2-CaO-SiO_2$ pigments are factored by Cassiterite and Malayaite relationship with $Cr_2O_3$. The experiment described the effect of $CrCl_3$ by adding $H_3BO_3$ as a mineralizer to increase the formation of Malayaite crystal, substituting $CrCl_3$ instead of $Cr_2O_3$ in pigment as a chromophore. Synthesized pigments were analyzed by XRD, FT-IR, Raman Spectroscop, UV and UV-vis. The result shows the differences in amount of crystal phases and oxidation state of Cr ion, which causes the color change. The melting point of $CrCl_3$ is lower than $Cr_2O_3$ which act as a mineralizer and makes the pigment synthesized in lower temperature at $1200^{\circ}C$. Holding 3 h firing at $900^{\circ}C$ where the synthesize forms shows better effect of Malayaite crystal phases and increasing engaged effect of $CrCl_3$ where the color pigmentation is more defined then in $Cr_2O_3$.

• BMB Reports
• /
• 제35권4호
• /
• pp.364-370
• /
• 2002

The effect of sodium n-dodecyl sulphate (SDS) on hemoglobin autoxidation was studied in the presence of a 100mM phosphate buffer (pH 7.0) by different methods. These included spectorphotometry, fluorescence technique, cyclic voltametry, differential scanning calorimetry, and densitometry. Spectroscopic studies showed that SDS concentrations up to 1 mM increased deoxy-, decreases oxy-, and had no significant effect on the met- conformation of hemoglobin. Therefore, a SDS concentration up to 1 mM increased the deoxy form of hemoglobin as the folded, compact state and decreases the oxy conformation. The turbidity measurements and differential scanning calorimetry techniques indicated a more stable conformation for hemoglobin in the presence of SDS up to 1mM. Electrochemical studies also confirmed a more difficult oxidation under these conditions. The induction of the deoxy form in the presence of SDS was confirmed by densitometry techniques. The compact structure of deoxyhemoglobin blocks the formation of met-conformation in low SDS concentrations.

• 대한화학회지
• /
• 제7권1호
• /
• pp.1-5
• /
• 1963

The thermal decomposition process of ammonium paratungstate $5(NH_4)_2O{\cdot}12WO_3{\cdot}5H_2O$ was analysed by the methods of thermogravimetric analysis, differential thermal analysis, quantitative analysis of the ammonia which is released during heating and X-ray powder diffraction in air and in vacuo. There are several endothermic peaks which indicate release of ammonia and exothermic peaks which indicate crystal growth and oxidation of decomposed prodects in air. After water is driven off the ammonia is released at intervals corresponding to the endothermic peaks. The highest temperature at which ammonia is released is about $420^{\circ}C$ in air and $480^{\circ}C$ in vacuo. In air the crystal structure of paratungstate is conserved up to a temperature of $300^{\circ}C$ at which the remaining ammonia is about 4 mols. At $320^{\circ}C$ the remaining ammonia becomes less than 2 mols and the paratungstate structure changes into the amorphous state. After that ${\gamma}$ oxide is produced and is oxidized to ${\alpha}$ oxide in the temperature range of 400-$500^{\circ}C$ in air. In vacuo however the endothermic peaks and structural changes occur at lower temperatures and the structure of ${\gamma}$ oxide is conserved up to temperatures higher than $500^{\circ}C$.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.398-403
• /
• 2001

There is a potential usability of electric arc furnace(EAF) dust produced during the iron manufacturing process as a recycled resource, because valuable materials such as Zn, Pb and Fe are contained in it. In this study, metallic Zn was recycled from the fine electric arc furnace dust by a solid state reduction method using carbon at relatively low temperature. It was possible to recover metallic zinc by using of high vapour pressure of zinc with this reduction method. The feasibility of recycled zinc for cold bonded pellet(CBP) was investigated. The main composition of EAF dust were franklinite(ZnFe$_2$O$_4$), magnetite(Fe$_3$O$_4$) and zincite(ZnO), and Pb and Cl were completely removed by a heat treatment in oxidation environment. The reduction ratio increased as the solid carbon content increased, and it increased with decreasing of dust particle size and increasing of compaction pressure due to a increase of contact area.

• 품질경영학회지
• /
• 제16권1호
• /
• pp.1-7
• /
• 1988

The most important element upon the quality of family glass products is the color of glass, which is the first object of consumers concern in purchasing. Therefore, colorless and transparent color tone can level up the additional value of the products. But we have produced the glass products in a large quantity by using the automatic tank brazier, chronic problem has been left over the color tone. By compounding and analizing the management techniques applied by peculiar technique and design of experiments pertinently, and by adjusting the decoloring composition ratio, we can contribute to improvement of color tone as well as to the cost reduction by diminishing the unnecessary decoloring agent. Intangible effect was the securing the superiority of quality home and abroad with the improvement of color tone and was taking a triangular position the factors influencing the glass decoloring which had been an unexhausted field. Tangible effect was the reduction of decoloring cost by diminishing the unnecessary oxidant. We registered the optimal composition ratio condition which was searched by applicating the design of experiments. To maintain good color tone, we manage the degree of purity, the most important thing among the items of color tone, continuously by control chart and it has maintained steady state now.

• Journal of Photoscience
• /
• 제11권2호
• /
• pp.77-81
• /
• 2004

Deoxygadusol (DO) and structurally related mycosporine-like amino acids, i.e. mycosporine glycine (MO) and mycosporine taurine (MT), were isolated from phytoplankton Prorocentrum micans and studied for the reactivity toward singlet oxygen. These water-soluble compounds with a cyclohexenone chromophore were all shown to be highly effective in quenching singlet oxygen ($^1$ $O_2$), with the efficiencies being significantly larger compared with histidine, a well-known $^1$ $O_2$ quencher. The $^1$ $O_2$ reaction rate constant ( $k_{Q}$) of DG was determined to be 5.4 ${\times}$ 10$^{7}$ $M^{-1}$ $s^{-1}$ by a steady state method based on competitive inhibition of rubrene oxidation. The feasibility of this method was confirmed by estimating the $k_{Q}$ values for MG and two other quenchers, furfuryl alcohol and 1,4-diazabicyclo [2,2,2]octane, and comparing with those values determined by the time-resolved $^1$ $O_2$ decay method in the previous work.ork.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.204.2-204.2
• /
• 2014

Among various metal oxides, ZrO2 is of particular interests and has received widespread attention thanks to its ideal mechanical and chemical stability. As a cheap metal, Ag nanoparticles are also widely used as catalysts in ethylene epoxidation and methanol oxidation. However, the nature of Ag-ZrO2 interfaces is still unknown. In this work, the growth, interfacial interaction and thermal stability of Ag nanoparticles on ZrO2(111) film surfaces were studied by low-energy electron diffraction (LEED), synchrotron radiation photoemission spectroscopy (SRPES), and X-ray photoelectron spectroscopy (XPS). The ZrO2(111) films were epitaxially grown on Pt(111). Three-dimensional (3D) growth model of Ag on the ZrO2(111) surface at 300 K was observed with a density of ${\sim}2.0{\times}1012particles/cm2$. The binding energy of Ag 3d shifts to low BE from very low to high Ag coverages by 0.5 eV. The Auger parameters shows the primary contribution to the Ag core level BE shift is final state effect, indicating a very weak interaction between Ag clusters and ZrO2(111) film. Thermal stability experiments demonstrate that Ag particles underwent serious sintering before they desorb from the zirconia film surface. In addition, large Ag particles have stronger ability of inhibiting sintering.

• 한국정밀공학회지
• /
• 제24권5호
• /
• pp.104-109
• /
• 2007

Photochemical patterning of self-assembled mono layers (SAMs) has been performed by diode pumped solid state (DPSS) 3rd harmonic Nd:$YVO_4$ laser with wavelength of 355 nm. SAMs patternings of parallel lines have subsequently been used either to generate compositional chemical patterns or fabricate microstructures by a wet etching. This paper describes a selective etching process with patterned SAMs of alkanetiolate molecules on the surface of gold. SAMs formed by the adsorption of alkanethiols onto gold substrate employs as very thin photoresists. In this paper, the influence of the interaction between the functional group of SAMs and the etching solution is studied with optimal laser irradiation conditions. The results show that hydrophobic functional groups of SAMs are more effective for selective chemical etching than the hydrophilic ones.