• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.34 no.2
• /
• pp.67-72
• /
• 2002

The two stage laccase-assisted delignification process led to significant lignin removal in the non-pressurized treatments. It is clearly shown that an alkaline extraction prior to the second laccase treatment significantly increased the overall delignification by ∼15%. This is in line with the contention that the residual lignin has undergone structural changes during the alkaline extraction, and the resulting modified structures are susceptible to the laccase oxidation. In phenolic hydroxyl group, the pre- methylated sample was very responsive to the delignification process. The phenolic hydroxyl groups could be increased during side chain cleavage catalyzed by laccase. This finding demonstrates that the delignification oi etherified structures is an important reaction in the delignificaton by laccase.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.04a
• /
• pp.119-122
• /
• 2003

We report a dramatic increase in the photo-stability of a blue-emitting polymer, poly(9,9-dioctylfluorene), achieved by the addition of gold nanoparticles to the polymer. The optical absorption band of gold nanoparticles is tuned to resonate the triplet exciton-ground state band gap energy of the polymer. The photo-oxidation rate of poly(9,9-dioctylfluorene) was drastically reduced by doping the polymer with a very small amount ($10^{-6}-10^{-5}$ volume fraction) of gold nanoparticles. The gold nanoparticles used herein act as the quenching agent of the triplet states and can be directly applied to various blue light emitting polymer thin film ( < 100 nm ) devices.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.173.2-173.2
• /
• 2014

Thin nitride thin films were synthesized by reactive radio-frequency magnetron sputtering in the ultra high vacuum (UHV) chamber. To control the characteristics of thin films, tin nitride thin films were obtained various argon and nitrogen gas mixtures, especially low nitrogen gas ratios. Tin nitride thin films were analyzed with alpha step, scanning electron microscopy (SEM), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), and 4 point probe measurement. The result of alpha step and SEM showed that the thickness of thin nitride thin films were decreased with increasing nitrogen gas ratios. The metallic tin structure was decreased and the amorphous tin nitride structure were observed by XRD with higher nitrogen gas ratios. The oxidation state of tin and nitride were studied with high resolution Sn 3d and N 1s XP spectra.

• Progress in Superconductivity
• /
• v.10 no.1
• /
• pp.17-22
• /
• 2008

We have examined the effect of ball-milling on the superconducting properties of $MgB_2$ doped with C. The ball-milling of pre-reacted $MgB_2$ powder was carried out in dry or wet state using C or diethylenetriamine ($C_{4}H_{13}N_3$) as additives. The diethylenetriamine, whose chemical formula contains no oxygen, was chosen to avoid an excess oxidation during doping. The superconducting transition temperature (Tc) of the ball-milled or doped $MgB_2$ powders was only slightly smaller than that of undoped $MgB_2$. The critical current density (Jc) of the highly ball-milled $MgB_2$ was higher than that of C-doped $MgB_2$. The addition of diethylenetriamine was detrimental to Jc, although Tc was almost unchanged.

• Journal of the Korean Wood Science and Technology
• /
• v.29 no.3
• /
• pp.83-91
• /
• 2001

This paper examines the structural characteristics of fern lignins (deer fern (Blechnum spicant), sword fern (Polystichum munitum) and maidenhair fern (Adiantum pedatum)) by chemical degradation methods of thioacidolysis and nitrobenzene oxidation as well as 13C NMR. Phloroglucinol-HCI staining indicates that the lignins are specifically accumulated at the sclerenchyma cells beneath the epidermis and vascular bundles. The fern lignins consist of only guaiacyl units. Remarkably, the frequency of the -O-4 linkages is extremely low in fern lignins (only 9 to 11 %). Furthermore, the presence of lignin is ambiguous in maidenhair fern, due to very rare amount of -O-4 linkage. Biphenyl (5-5) and 1,2 bis arylpropane (-1) are main condensed dimeric substructures in fern lignins over 70%. In addition, 13C NMR analysis strongly evidenced the integration of phenolics or their derivatives into the fern lignins.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 2004.05a
• /
• pp.197-200
• /
• 2004

Compared to conventional flame combustion, catalytic combustion had the advantage of oxidation of V.O.C. gas which was high voluminous, low caloric mixture flow. However, the temperature of mixture gas should be over the one of catalytic reaction start and the control of reaction on the catalytic surface tends to be vulnerable. To overcome these obstacles, composition of both catalytic combustor and heat exchanger was devised and named the sequential catalytic combustion system. In this system, only trigger unit needed preheating process for transient starting time. Once trigger unit was ignited, the next unit w3s supplied heat to ignite from that and same process was performed to the last one sequentially. When it come to steady state, whole mixture gas was oxidated at each unit simultaneously and preheating for trigger unit was not needed any more. System of 100 kcalh/hr capacity was devised and operated successfully.

• Fibers and Polymers
• /
• v.6 no.2
• /
• pp.113-120
• /
• 2005

Helium-oxygen plasma treatments were conducted to modify poly(trimethylene terephthalate) (PIT) and poly(ethylene terephthalate) (PET) warp knitted fabrics under atmospheric pressure. Lubricant and contamination removals by plasma etching effect were examined by weight loss $(\%)$ measurements and scanning electron microscopy (SEM) analysis. Surface oxidation by plasma treatments was revealed by x-ray photoelectron spectroscopy (XPS) analyses, resulting in formation of hydrophilic groups and moisture regain $(\%)$ enhancement. Low-stress mechanical properties (evaluated by Kawabata evaluation system) and bulk properties (air permeability and bust strength) were enhanced by plasma treatment. Increasing interfiber and interyarn frictions might play important roles in enhancing surface property changes by plasma etching effect, and then changing low-stress mechanical properties and bulk properties for both fabrics.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1995.05a
• /
• pp.980-986
• /
• 1995

LOMI(Low Oxidation State Metal Ion) 재염제의 구성성분 중 가장 중요한 성분인 $V^{2+}$-formate 를 formic acid 내에서 VO$^{2+}$ 이온을 전기화학적으로 환원시켜 제조하였다. 산성용액 내에서의 전기화학반응은 목적반응인 바나듐이온의 환원반응과 부반응인 수소이온의 환원반응이 경쟁적으로 일어나며 이는 전극재료의 영향을 크게 받는다. 따라서 본 연구에서는 Cyclic Voltammetry(CV) 방법으로 여러 가지 전극재료의 특성을 조사하여 공업적 활용이 가능한 전극으로 수은, 납 및 스테인레스 스틸을 선정하였다. 선정된 전극을 이용하여 제조실증시험을 수행한 결과 소량의 고순도 제염제의 제조에는 수은전극을 대략의 공업용 제염제가 필요한 경우에는 스태인레스 스틸 전극을 음극재료로 사용하는 것이 효과적임을 알 수 있었다.

• Macromolecular Research
• /
• v.13 no.1
• /
• pp.30-38
• /
• 2005

Sulfur-cured gum natural rubber vulcanizates were devulcanized using two different concentrations of diallyl disulfide. The devulcanization process was performed at $110^{\circ}C$ min in an open two-roll cracker-cum-mixing mill. Natural rubber vulcanizates having various sulfur/accelerator ratios were used to study the cleavage of monosulfide, disulfide, and polysulfide bonds. The properties of devulcanized natural rubber increased upon increasing the disulfide concentration and the mechanical properties of the revulcanized natural rubber increased upon decreasing the sulfur content in the original rubber vulcanizates. The scorch time and the maximum state of cure both increased when the ground vulcanizates were treated with higher amounts of disulfide. TGA and DMA were conducted to study the effects of the devulcanization on the thermal stability and the $T_g$ behavior of the vulcanizates. SEM analysis was conducted to study how the failure mechanism was affected by the devulcanization process. It was possible to recover $70-80\%$ of the original gum rubber properties by using this process. From IR spectroscopic analysis, we observed that the oxidation of the main chains did not occur during high-temperature milling.

• Journal of the Korean earth science society
• /
• v.25 no.1
• /
• pp.48-51
• /
• 2004

The light element candidates such as S, O, Si, and K are discussed for the reasonable compositions in the earth's core since the available data show density difference from pure iron core. These candidates are favored by the some evidences such as depletion in the crust and mantle, and lower eutectic temperature of Fe-FeS melt for sulfur. FeO phase for oxygen, lighter mass than sulfur and solubility in metallic phases for silicon, and partitioning in Fe-FeS melt for potassium. However, other problems such as short experimental data, initial compositions of these elements, and oxidation state during the formation of the earth should be solved simultaneously to confirm these light elements.