• 한국지하수토양환경학회지:지하수토양환경
• /
• 제20권5호
• /
• pp.47-51
• /
• 2015

Biocatalytic degradation of total petroleum hydrocarbons (TPHs) in contaminated soil by hemoglobin and hydrogen peroxide is an effective soil remediation method. This study used a laboratory soil reactor experiment to evaluate the effectiveness of a nonspecific biocatalytic reaction with hemoglobin and H₂O₂ for treating TPH-contaminated soil. We also quantified changes in the soil microbial community using real-time PCR analysis during the experimental treatment. The results show that the measured rate constant for the reaction with added hemoglobin was 0.051/day, about 3.5 times higher than the constant for the reaction with only H₂O₂ (0.014/day). After four weeks of treatment, 76% of the initial soil TPH concentration was removed with hemoglobin and hydrogen peroxide treatment. The removal of initial soil TPH concentration was 26% when only hydrogen peroxide was used. The soil microbial community, based on 16S rRNA gene copy number, was higher (7.1 × 10⁶ copy number/g of bacteria, and 7.4 × 10⁵ copy number/g of Archaea, respectively) in the hemoglobin catalyzed treatment. Our results show that TPH treatment in contaminated soil using hemoglobin catalyzed oxidation led to the enhanced removal effectiveness and was non-toxic to the native soil microbial community in the initial soil.

• Journal of Korean Dental Science
• /
• 제11권2호
• /
• pp.71-81
• /
• 2018

Purpose: The purpose of this study was to investigate the corrosion behaviors of dental implant alloy after microsized surface modification in electrolytes containing Mn ion. Materials and Methods: $Mn-TiO_2$ coatings were prepared on the Ti-6Al-4V alloy for dental implants using a plasma electrolytic oxidation (PEO) method carried out in electrolytes containing different concentrations of Mn, namely, 0%, 5%, and 20%. Potentiodynamic method was employed to examine the corrosion behaviors, and the alternatingcurrent (AC) impedance behaviors were examined in 0.9% NaCl solution at $36.5^{\circ}C{\pm}1.0^{\circ}C$ using a potentiostat and an electrochemical impedance spectroscope. The potentiodynamic test was performed with a scanning rate of $1.667mV\;s^{-1}$ from -1,500 to 2,000 mV. A frequency range of $10^{-1}$ to $10^5Hz$ was used for the electrochemical impedance spectroscopy (EIS) measurements. The amplitude of the AC signal was 10 mV, and 5 points per decade were used. The morphology and structure of the samples were examined using field-emission scanning electron microscopy and thin-film X-ray diffraction. The elemental analysis was performed using energy-dispersive X-ray spectroscopy. Result: The PEO-treated surface exhibited an irregular pore shape, and the pore size and number of the pores increased with an increase in the Mn concentration. For the PEO-treated surface, a higher corrosion current density ($I_{corr}$) and a lower corrosion potential ($E_{corr}$) was obtained as compared to that of the bulk surface. However, the current density in the passive regions ($I_{pass}$) was found to be more stable for the PEO-treated surface than that of the bulk surface. As the Mn concentration increased, the capacitance values of the outer porous layer and the barrier layer decreased, and the polarization resistance of the barrier layers increased. In the case of the Mn/Ca-P coatings, the corroded surface was found to be covered with corrosion products. Conclusion: It is confirmed that corrosion resistance and polarization resistance of PEO-treated alloy increased as Mn content increased, and PEO-treated surface showed lower current density in the passive region.

• 청정기술
• /
• 제7권1호
• /
• pp.65-74
• /
• 2001

본 연구는 디젤엔진에서 배출되는 NOx환원용 촉매로서 산화반응에서 우수한 활성을 나타내고 있는 페롭스카이트상의 $LaCoO_3$을 sol-gel 공정을 이용하여 촉매코팅용액을 제조한 후, 이를 기존의 dip-coating방법보다 코팅시간, 코팅량, NO-CO 산화 환원 반응에 있어서 경제적이고 효율적인 modified dip-coating방법을 이용하여 촉매코팅필터를 제조하고 이를 후처리장치에 부착함으로써 디젤엔진에서 배출되는 배가스를 효과적으로 제거시키고자 한다. 실험결과, modified dip-coating방법이 기존의 dip-coating방법에 비해서 코팅에 소요되는 용액량이 8.3배 코팅시간 83.3배 단축되었으며, 코팅량은 2~3배정도 커지고, NO-CO 산화 환원 반응성도 1.1~1.8배 가량 증가하였다. 그리고 코팅점도는 $0.006202kg{\cdot}m/sec$을 이용하여 코팅횟수 2회, 코팅량은 88.56mg/g에서 우수한 반응을 보였다. 또한 세라믹 필터의 셀수에 있어서는 200 CPSI가 적절함을 확인할 수 있다.

• 한국연소학회지
• /
• 제12권3호
• /
• pp.16-23
• /
• 2007

Employing an after-treatment system has almost become a mandatory requirement for Diesel vehicles, which results from a reinforced exhaust regulations as the number of vehicles powered by a Diesel engine increases. The Diesel Particulate Filter (DPF) system is considered as one of the most efficient method to reduce particulate matter (PM); however, the improvement of a regeneration performance at any engine operation point presents a considerable challenge by itself. Temperature, gas composition and flow rate of exhaust gas are important parameters in DPF evaluation processes, especially during a regeneration process. Engine dynamometer and segment tester are generally used in DPF evaluation so far. These test methods, however, could not completely evaluate the effect of various parameters on real DPF, such as oxygen concentration, amount of soot and exhaust gas temperatures. The evaluation of DPF systems using a dump combustor has been verified experimentally and this dump combustor system is likely to be appropriate for the DOC (Diesel Oxidation Catalyst) and SCR (Selective Catalytic Reduction) assessments test, too.

• KSBB Journal
• /
• 제23권6호
• /
• pp.484-488
• /
• 2008

본 연구에서는 peroxidase 활성의 신속한 스크리닝을 위해 peroxidase의 활성을 정량적으로 평가할 수 있는 분석으로 agar plate와 96-well plate에서 peroxdase의 활성에 비례하여 색상감도를 측정할 수 있는 colorimetric 분석법을 개발하였다. 이 방법은 RP-HPLC 결과와 매우 비례적으로 상관적인 결과를 보였다. 이 colorimetric 분석법을 사용하여, 폐수에서 한천 고체배지에서 7회에 걸친 스크리닝으로 높은 농도의 2,4-DCP(1000 ppm)에서 생존하는 균주를 스크리닝하였고 선별된 이들 균주들은 탄소원으로 2,4-DCP 만을 대사할 수 있으며 높은 peroxidase 생산량을 보였다. 분리된 균주들 중 높은 peroxidase 활성을 가지는 2,4-DCP 분해 균주를 분리하였고 최종 분리된 균주는 염색폐수의 COD를 4시간 동안 44%에서 61%까지 제거하였다. 상기의 결과에 의해 본 연구에서 개발된 발색법이 페놀화합물 분해 균주 스크리닝법이 빠르고 쉬운 난분해성 물질인 페놀 혼합물의 분해 균주 탐색에 대하여 성공적으로 적용될 수 있기를 기대한다.

• Journal of Acupuncture Research
• /
• 제23권6호
• /
• pp.19-27
• /
• 2006

Objectives : Type analysis is done on pharmacopuncture related papers published in the Journal of Korean Acupuncture and Moxibustion from the inaugural issue to August 2006 issue. Methods : Journal search engine KSI ISS and KSI KISS were mainly used and additional sources were complemented by the index issue and English journals. Results : 1. The number of journals associated with pharmacopuncture is 438 papers. 2. For type analysis of the type of studies, experiment papers outnumbered other types with 355 cases, followed by 70 for clinical trials, and 14 for literary studies. 3. For type analysis of the pharmacopuncture extracts, bee venom related papers were most numerous with 101 cases. And nextis 52 experiment papers and 41 clinical trials. 4. Type analysis on the type of illnesses listed in experiment papers, 81 for anti-cancer ${\cdot}$ immune disorders ${\cdot}$ anti-oxidation, 61 papers concentrated on arthritis, etc. Conclusion : Since 1984 to August 2006 issue ranging 22 years, type analysis revealed that the number of journals pertaining to pharmacopuncture has risen steadily over the years and nearly half of papers published recently are dealing with pharmacopuncture. Pharmacopuncture is a treatment method based on the unique theory of Korean traditional medicine. And effort and academical approach on pharmacopuncture are expected to receive positive evaluation.

• 펄프종이기술
• /
• 제33권1호
• /
• pp.73-79
• /
• 2001

Stricter environmental demands have increased the need to replace conventional C/D bleaching sequence by chlorine-free sequence. Permanganate is well known as a powerful oxidant and have been used industrially in variable fields. However, it has considered to be difficult to use permanganate as a bleaching reagent because of its strong oxidative effect decreasing the viscosity of pulps extremely. We have tried to use permanganate as a bleaching reagent for KP under the mild condition and it was clear that pernanganate oxidized lignin remained in pulps selectively and increased pulp brightness decreasing K number of pulps with small degradation of cellulose. We have employed the neutral condition in the permanganate bleaching process in this study. In this case, permanganate was converted to manganese dioxide after bleaching reaction. The manganese dioxide is remained in the treated pulp fibers because of its insolublity in water. So it was required to reduction the manganese oxide to manganese ion by using reductants with acid. In this paper, we proposed to use oxalic acid as a reducing reagent converting manganese oxide to manganese ion after bleaching reaction. Oxalic acid plays the role as a reductant and a acid, so post-treatment after bleaching became to be easy by using oxalic acid. On the study using lignin model compounds, it was clear that permaganate react with phenols firstly, after that oxalic acid reduce the manganese oxide to manganese ion in the mixture of permanganate, phenols and oxalic acid. Several lignin model compounds ($\textit{p}$-hydroxybenzaldehyde, vanillin, syringaldehyde, veratraldehyde) are selected to elucidate the effect of substituents on reaction rate and its mechanism with permanganate including oxalic acid in this study. Except for veratraldehyde, the rate of oxidative degradation of phenolic compounds by permanganate with oxalic acid are higher than neutral condition. Especially, the degradation rate of $\textit{p}$-hydroxybenzaldehyde are strongly dependent on pH of reaction mixture. On the other hand, the degradation rate of veratraldehyde are decreased with decreasing pH and main degradation product is veratric acid. This result indicate that pH of bleaching liquor should be kept over 2 to degrade of non-phenolic lignin in the pulps effectively in permanganate bleaching.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1996년도 The 9th KACG Technical Annual Meeting and the 3rd Korea-Japan EMGS (Electronic Materials Growth Symposium)
• /
• pp.508-508
• /
• 1996

;The growth of films have considerable interest in the field of superlattice structured multi-layer epitaxy led to realization of new devices concepts. Molecular beam epitaxy (MBE) with in situ observation by reflection high-energy electron diffraction (RHEED) is a key technology for controlled layered growth on the atomic scale in oxide crystal thin films. Also, the combination of radical oxygen source and MBE will certainly accelerate the progress of applications of oxides. In this study, the growth process of single crystal films using by MBE method is discussed taking the oxide materials of Bi-Sr-Ca-Cu family. Oxidation was provided by a flux density of activated oxygen (oxygen radicals) from an rf-excited discharge. Generation of oxygen radicals is obtained in a specially designed radical sources with different types (coil and electrode types). Molecular oxygen was introduced into a quartz tube through a variable leak valve with mass flowmeter. Corresponding to the oxygen flow rate, the pressure of the system ranged from $1{\;}{\times}{\;}10^{-6}{\;}Torr{\;}to{\;}5{\;}{\times}{\;}10^{-5}$ Torr. The base pressure was $1{\;}{\times}{\;}10^{-10}$ Torr. The growth of Bi-oxides was achieved by coevaporation of metal elements and oxygen. In this way a Bi-oxide multilayer structure was prepared on a basal-plane MgO or $SrTiO_3$ substrate. The grown films compiled using RHEED patterns during and after the growth. Futher, the exact observation of oxygen radicals with MBE is an important technology for a approach of growth conditions on stoichiometry and perfection on the atomic scale in oxide. The oxidization degree, which is determined and controlled by the number of activated oxygen when using radical sources of two types, are utilized by voltage locked loop (VLL) method. Coil type is suitable for oxygen radical source than electrode type. The relationship between the flux of oxygen radical and the rf power or oxygen partial pressure estimated. The flux of radicals increases as the rf power increases, and indicates to the frequency change having the the value of about $2{\times}10^{14}{\;}atoms{\;}{\cdots}{\;}cm^{-2}{\;}{\cdots}{\;}S^{-I}$ when the oxygen flow rate of 2.0 seem and rf power 150 W.150 W.

• 대한기계학회논문집A
• /
• 제35권7호
• /
• pp.753-758
• /
• 2011

초내열합금인 GTD-111은 고온강도와 내산화성이 우수하여 가스터빈에서 사용되는 소재이다. 초내열합금의 피로 수명 예측은 가스터빈의 효율을 개선하기 위하여 매우 중요하다. 본 연구에서의 저주기 피로시험은 실제 운전 환경과 유사하게 변형률 범위, 온도를 다양하게 설정하여 시험을 수행하였다. GTD-111의 저주기 피로수명을 예측하기 위하여 변형률 에너지 밀도와 파단 사이클과의 관계를 이용하였다. 시험결과를 토대로 변형률 에너지법과 Coffin-Manson법에 의하여 피로수명을 예측하였다.

• 한국자동차공학회논문집
• /
• 제15권4호
• /
• pp.178-185
• /
• 2007

A study is improvement of power and emission in a inline-pump Dr diesel engine by using Dimethyl ether Fuel. Dimethyl ether (DME) is an oxygenated fuel with a cetane number higher than that of diesel oil. It meets the ULEV emission regulation and reduces the smoke to almost zero when used in a diesel engine. But NOx emission is almost same and CO, THC emissions are lower than that of diesel engine. The emissions aren't satisfied the stronger emission regulation in the further. Generally DOC (Diesel Oxidation Catalyst) is used to reduce CO & THC emissions and EGR (Exhaust Gas Recirculation) system is used to reduce NOx emission. Test results showed that the torque and the power with DME were almost same as those of pure diesel oil, but the brake thermal efficiency increased a little. also the BSEC (Brake Specific Energy Consumption) with DME was similar that of diesel. The test results showed that the DOC was the vary effective method to reduce the CO emission in case of Dimethyl Ether Fuel in diesel engine. But, THC emission is showed a little reduction rates. Also EGR system was the very effective method to reduce the NOx emission in case of Dimethyl Ether Fuel in diesel engine.