• 한국물환경학회지
• /
• 제22권5호
• /
• pp.851-855
• /
• 2006

The aim of this study was to investigate characteristics of formation of mixed oxidants and some aspects of the performance of electrochemical process as an alternative disinfection strategy for water purification. The study of electrochemical process has shown free chlorine to be produced, but smaller amounts of stronger oxidants, such as ozone, hydrogen peroxide and OH radicals, were also generated. The formation of ozone and hydrogen peroxide increased with increasing electric conductivity, but was limited at conductivities greater than 0.6 mS/cm. Also, formation of OH radical was enhanced as electric conductivity was increased to 0.9 mS/cm and The stead-state concentrations of OH radical were calculated at $1.1{\sim}6.4{\times}10^{-14}M$. Using E. coti, inactivation kinetic studies were performed. With the exception of free chlorine, the role of mixed oxidants, especially OH radical, was investigated for enhancement of the inactivation rate.

• 상하수도학회지
• /
• 제19권5호
• /
• pp.625-631
• /
• 2005

Disinfection characteristics of mixed oxidants produced by mean of electro-chemical method were evaluated. Inactivation rate of B. subtilis spore on the mixed oxidants were similar with that of chlorine. Based on the experimental results, activation energy of mixed oxidants and chlorine with B. subtilis spore at pH 8.3 were calculated as 30.8, $34.7kJ{\cdot}mol^{-1}$ respectively. UV absorption spectrum of both chlorine and mixed oxidants present similar. Molar extinction coefficients of chlorine and mixed oxidants at 292nm, which is maximum absorption wavelength of $OCl^-$ were 357, $377M^{-1}cm^{-1}$, respectively. Disinfectant decay rate and formation rate of THM in the S WTP filtrate also shows insignificant difference for both mixed oxidants and chlorine. In consequent, it was confirmed that high portion of chlorine presents in the mixed oxidants.

• 한국환경과학회지
• /
• 제15권3호
• /
• pp.203-209
• /
• 2006

In predicting oxidants concentration, the most important fact is to select a suitable photochemical reaction mechanism. Sensitivity analysis of $O_3$ and other important photochemical oxidants concentrations was conducted by using CBM-IV model. The predicted oxidants concentration was considerably related with the initial concentration of formaldehyde, $[NO_2]/[NO],\;NO_x$, RH and RCHO. As the initial concentration of formaldehyde increased, concentration of $NO_2$ increased. $O_3$ concentration was proportional to the $[NO_2]/[NO]$ ratio. When the initial concentrations of RH and RCHO were high, photochemical reaction was more reactive, including more rapid conversion of NO to $NO_2$ and increased oxidants. Also, the sensitivities of ozone formation to rate constants, $K_l,\;K_2\;and\;K_3$ in the $NO_2$ photolysis were studied.

• 한국환경과학회지
• /
• 제18권1호
• /
• pp.49-60
• /
• 2009

Fabrication and oxidants formation of 1 and 2 component metal oxide electrode, which is known to be so effective to destruct non-biodegradable organics in wastewater, were studied. Five electrode materials (Ru, Pt, Sn, Sb and Gd) were used for the 1 and 2 component electrode. The metal oxide electrode was prepared by coating the electrode material on the surface of the titanium mesh and then thermal oxidation at $500^{\circ}C$ for 1 h. The removed RhB per 2 min and unit W for one component electrode decreased in the following sequences: Ru/Ti>Sb/Ti>Pt/Ti>Gd/Ti>Sn/Ti. The concentration of oxidants generated in 1 and 2 component electrodes was in the order of: $ClO_2$> free Cl>$H_2O_2>O_3$. OH radical was not generated from in entire one and two component electrodes. RhB degradation rate and generated oxidants of the Ru-Sn=9:1 electrode was higher than that of the two component electrode. The exact relationship between the removal of RhB and the generated oxidants concentration was not obvious. However, it was assumed that electrode with high RhB decolorization had high oxidant concentration.

• 한국환경과학회지
• /
• 제20권7호
• /
• pp.891-898
• /
• 2011

The aim of this research was to evaluate the effect of combination of disinfection process (electrolysis, UV process) on Escherichia coli (E. coli) disinfection and oxidants (OH radical, $ClO_2$, HOCl, $H_2O_2$ and $O_3$) generation. The effect of electrolyte type (NaCl, KCl and $Na_2SO_4$) on the E. coli disinfection and oxidants generation were evaluated. The experimental results showed that performance of E. coli disinfection of electrolysis and UV single process was similar. Combination of electrolysis and UV process enhanced the E. coli disinfection and 4-carboxybenzaldehyde (4-CBA, indicator of the generation of OH radical) degradation. It is clearly showed synergy effect on disinfection and OH radical formation. However chlorine ($ClO_2$, HOCl) and oxygen type ($H_2O_2$, $O_3$) oxidants were decreased with the combination of two process. In electrolysis + UV complex process, electro-generated $H_2O_2$ and $O_3$ were reacted with UV light of UV-C lamp and increased 4-CBA degradation(increase OH radical). Disinfection of electrolyte of chlorine type was higher than that of the sulfate type electrolyte due to the higher generation of OH radical and oxidants.

• 한국환경과학회지
• /
• 제18권1호
• /
• pp.61-72
• /
• 2009

Fabrication and oxidants production of 3 or 4 components metal oxide electrode, which is known to be so effective to destruct non-biodegradable organics in wastewater, were studied. Five electrode materials (Ru as main component and Pt, Sn, Sb and Gd as minor components) were used for the 3 or 4 components electrode. The metal oxide electrode was prepared by coating the electrode material on the surface of the titanium mesh and then thermal oxidation at $500^{\circ}C$ for 1h. The removed RhB per 2 min and unit W of 3 components electrode was in the order: Ru:Sn:Sb=9:1:1 > Ru:Pt:Gd=5:5:1 > Ru:Sn=9:1 > Ru:Sn:Gd=9:1:1 > Ru:Sb:Gd=9:1:1. Although RhB decolorization of Ru:Sn:Sb:Gd electrode was the highest among the 4 components electrode, the RhB decolorization and oxidants formation of the Ru:Sn:Sb=9:1:1 electrode was higher than that of the 3 and 4 components electrode. Electrogenerated oxidants (free Cl and $ClO_2$) of chlorine type in 3 and 4 components electrode were higher than other oxidants such as $H_2O_2\;and\;O_3$. It was assumed that electrode with high RhB decolorization showed high oxidant generation and COD removal efficiency. OH radical which is electrogenerated by the direct electrolysis was not generated the entire 3 and 4 components electrode, therefore main mechanism of RhB degradation by metal oxide electrode based Ru was considered indirect electrolysis using electrogenerated oxidants.

• 한국연초학회지
• /
• 제14권2호
• /
• pp.168-195
• /
• 1992

Pulmonary system is a target organ and primary defense mechanism against environmental oxidants and polutants. Enzymatic and nonenzymatic antioxdant defense mechanisms undoubtedly protect the lung from oxidants even endogenous oxidative stress. In addition, new ways of augmenting pulmonary antioxidant defenses are developed, which can be used to support the intrinsic antioxidants. Therefore, improved understanding of antioxidant defense mechanisms will increase our knowledge of the cause and will suggest rational approaches for treating and preventing oxidant-induced lung injury. In this review, we discuss the formation and scavenging of free radicals, and the strategies for antioxidant defense of pulmonary system.

• Applied Biological Chemistry
• /
• 제37권6호
• /
• pp.472-479
• /
• 1994

상수처리시 토양현탁액과 같은 유기물이 있을 때 산화제, 응집제 및 흡착제의 종류를 달리하고 처리방법을 변경시켰을 때 THMs 및 유기물의 제거정도를 조사하였다. 산화제로 처리된 $ClO_2$가 다른 산화제인 $Cl_2,\;NH_2Cl,\;KMnO_2$ 및 $O_3$ 보다 THMs 생성억제와 THMs의 전구물질인 유기물을 제거시키는데 가장 효율적이었다. 산화제$(Cl_2,\;NH_2Cl,\;KMnO_4,\;ClO_2,\;O_3)$를 응집 이후에 처리하였을 때 유기물의 양은 거의 변화가 없었으나 THMs의 생성량은 응집 이전 처리보다 약 $36.7{\sim}8.2%$ 정도 감소하였다. 수중 유기물을 응집 제거시키기 위하여 응집제로 alum과 ferric sulfate를 처리하였을 때 응집 효율은 유기물의 분자량 분포에 따라 상이하게 나타났다. THMs 제거 및 생성 억제를 위한 활성탄의 처리는 여과 이후의 처리가 산화제 처리 이전의 활성탄 처리보다 효과적이었다.

• 대한환경공학회지
• /
• 제31권8호
• /
• pp.627-634
• /
• 2009

본 연구는 염화 이온 ($Cl^-$)을 전해질로 이용하는 전기화학적 공정에서 생성되는 염소산화부산물인 클로레이트 ($ClO_3\;^-$, 염소산염)의 생성 메커니즘을 알아보기 위해 수행되었다. 우선, pH 및 초기농도에 따른 생성 특성을 살펴보았으며, 유리염소 생성과의 관련성 및 오존, OH 라디칼 등의 혼합산화제의 영향을 간접 평가하여 클로레이트의 생성 메커니즘을 구체화하였다. 그 결과, 클로레이트의 생성은 유리염소 (HOCl/$OCl^-$)의 전기화학적 반응을 주된 반응으로 하며, 염화 이온의 직접 양극산화 반응 및 OH 라디칼에 의한 경로가 있음을 확인하였다. 이어서 생성된 클로레이트가 퍼클로레이트로 산화되는 반응도 볼 수 있었다. 또한, 전극 간격에 따른 생성 농도를 유리염소 생성과 함께 평가하여, 유리염소 생성 효율은 극대화 시키되 클로레이트의 발생을 최소화 할 수 있는 최적조건을 찾는 방안을 제시하였다.

• 한국환경과학회지
• /
• 제20권9호
• /
• pp.1115-1124
• /
• 2011

There is an increasing incidence in health problems related to environmental issues that originate from inadequate treatment of sewage. This has compelled scientists to engage in innovative technologies to achieve a effective disinfection process. Electrolysis has emerged as one of the more feasible alternatives to conventional disinfection process. The objectives of the present paper were to investigate the effect of chemical characteristics on oxidant formation and Escherichia coli (E. coli) disinfection in synthetic sewage effluents. The influence of parameters such as COD, SS, T-N and T-P were investigated using laboratory scale batch reactor. The results showed that the higher COD, T-N and T-P concentration, the lower N, N-Dimethyl-4-nitrosoaniline (RNO, indicator of the generation of OH radical) degradation and E. coli disinfection was observed. The order of effect of RNO degradation and E. coli disinfection was T-P > COD > T-N > SS. When 4 parameter of water quality were worked simultaneously, oxidants formation and disinfection was decreased with increase of the concentration of sewage. To increase of the disinfection performance, the increase of disinfection time or electric power was need.