• Korean Journal of Materials Research
• /
• v.13 no.12
• /
• pp.806-811
• /
• 2003

Ultrafine TaC powders were synthesised by spray drying using tantalum oxalate solution. The spray dried powders were spherical shape and less than 30 $\mu\textrm{m}$ in size. The powders calcined at 500 and X$700^{\circ}C$ showed amorphous structures and $Ta_2$$O_{5}$ phase was obtained by calcining at $700^{\circ}C$. The particle size and shape remains constant after calcination. The calcined spherical powders were composed of an agglomerate of primary particles under 50 nm in size. The complete formation of TaC could be achieved by heat treatment at $1050^{\circ}C$ for 6 hrs. The observed size of TaC powders by TEM was less than 200 nm.

• Journal of Power System Engineering
• /
• v.9 no.4
• /
• pp.124-129
• /
• 2005

Copper oxide, CuO, are very important components include of high temperature super- conductors, and widely used. The properties of sintered materials were affected by the size and shape of copper oxide with starting materials in the solid-phase reaction. A homogeneous and fine CuO powder was prepared by thermal decomposition of the copper oxalate precursor. Copper oxalate was precipitated by the addition of copper nitrate solution to an oxalic acid solution. The influence of various factors such as temperature, pH, concentration as well as ultrasonic irradiation in the solution were investigated.

• Analytical Science and Technology
• /
• v.8 no.4
• /
• pp.877-880
• /
• 1995

The determination of fluoride and the nutritious calcium in infusion of teas are explained. Tea leaves were pulverized and were immersed in boiling water. The solution was filtered and fluoride, calcium and oxalic acid were determined by the ion chromatography. The quantities of fluoride, calcium and oxalate ions extracted from 100 g of tea leaves were calculated. Tea leaves were also immersed in 0.5 M hydrochloric acid and extracted oxalate and calcium ions were analyzed. The free oxalic acid and calcium were extracted in boiling water and the total ones were extracted in hydrochloric acid. The quantity of calcium oxalate was calculated from the total and the free oxalic acids. The free calcium was estimated to be nutritious.

• Journal of the Korean Chemical Society
• /
• v.9 no.2
• /
• pp.71-74
• /
• 1965

Reduction of Ti(Ⅳ)-oxalate complex on dropping mercury electrode has been studied as a function of oxalate concentration and of pH varied with HCl. Assuming there are equilibrium $TiO(C_2O_4)_2= \;+\;2H^+\;=\;Ti^{+4}\;+\;2C_2O_4\;=\;+\;H_2O,\;K_4$ in addition to $TiO(C_2O_4)_2\;^=\;=\;TiO^{++}\;+\;2C_2O_4=\;K_2\;Ti(C_2O_4)_2\;^-\;=\;Ti^{+3}\;+\;2C_2O_4=\;K_3$ in the system cathodic wave has been well explained for that pH is higher than 0.5. The equilibrium constants $K_2,\;K_3$ and $K_4$ have been to be $2{\times}10^{-12},\;5{\times}10^{-13}$ and $10^{-11}$, respectively. The reduction of Ti(Ⅳ)-oxalate system is $Ti^{+4}\;+\;e\;{\to}\;Ti^{+3}$ in the concentration of hydrochloric acid, higher than 3M.

• YAKHAK HOEJI
• /
• v.37 no.4
• /
• pp.362-364
• /
• 1993

The sensitive detection of free fatty acids was investigated by using H$_{2}$O$_{2}$-bis(2,4,6-trichlorophenyl) oxalate chemiluminescence system after monodansyl cadaverine labeling. Because dansvl moiety is well excited by this chemiluminescence system, monodansyl cadaverine was a prominent reagent to this system for the determination of free fatty acids. The cluent of 50mM tris-HCI buffer (pH 7.7)-acetonitrile (1:4, v/v) was run through TSK gel ODS 80 TM column. The reagent solutions were mixed with the eluent containing the monodansyl cadaverine derivative of fatty acids from the column. By this system, linolic acid was detected 50 fmol by injected amount.

• The Korean Journal of Ceramics
• /
• v.2 no.2
• /
• pp.70-75
• /
• 1996

On the basis of growth mechanism proposed by recent work, partile of barium titanyl oxalate was controlled by aging in water. From aging at $25^{\circ}C$ for 3 hours, uniform particles of 0.3 ${\mu}$m were obtained. During aging, abnormal particle growth was observed, which were thought to be caused by impurities in water. With increase of aging time and temperature, particle grows more, and differential growth was promoted. In aging for long time, grown particles were cracked.

• Journal of Powder Materials
• /
• v.10 no.4
• /
• pp.255-261
• /
• 2003

Ultrafine TaC-5%Co composite powders were synthesized by spray conversion process using tantalum oxalate solution and cobalt nitrate hexahydrate(Co($(NO_3)_2$ . 6$H_2O$). The phase of Ta-Co oxide powders had amorphous structures after calcination below 50$0^{\circ}C$ and changed $Ta_2O_5$, $TaO_2$ and $CoTa_2O_6$ phase by heating above $600^{\circ}C$. The calcined Ta-Co oxide powders were spherical agglomerates consisted of ultrafine primary particles <50 nm in size. By carbothermal reaction, the TaC phase began to form from 90$0^{\circ}C$. The complete formation of TaC could be achieved at 105$0^{\circ}C$ for 6 hours. The observed size of TaC-Co composite powders by TEM was smaller than 200 nm.

• Bulletin of the Korean Chemical Society
• /
• v.14 no.1
• /
• pp.38-42
• /
• 1993

Factor analysis was applied to study the thermal decomposition of barium titanyl oxalate (BTO) which is used as the precursor of barium titanate. BTO was synthesized in $H_2O$ solvent and calcined at various temperatures. The X-ray diffraction patterns were obtained to make the data matrix of peak intensity vs. 2${\theta}$. Abstract factor analysis and target transformation factor analysis were applied to this data matrix. It has been found that the synthesized BTO consists of the crystals of $BaC_2O_4{\cdot}0.5H_2O\;and\;BaC_2O_4{\cdot}2H_2O$ as well as the amorphous solid of TiO-oxalate. The results also indicate that the BTO was transformed via $BaCO_3\;to\;BaTiO_3\;and\;Ba_2TiO_4$ during the thermal decomposition.

• Bulletin of the Korean Chemical Society
• /
• v.11 no.3
• /
• pp.224-227
• /
• 1990

The excitation mechanism of polycyclic aromatic amines (amino-PAHs) and polycyclic aromatic hydrocarbons(PAHs) for the chemiluminescence arising from the reaction between oxalate ester, bis(2,4,6-trichlorophenyl)oxalate (TCPO) or bis(2,4-dinitrophenyl)oxalate (DNPO) and hydrogen peroxide has been studied in terms of the excitation efficiencies to singlet excitation energies and the oxidative half-wave potentials. As a results of the study, the excitations of both amino-PAHs and PAHs appear to involve the charge transfer type of energy transfer. However the chemiluminescence efficiency corrected for fluorescence quantum yield of the amino-PAHs are varied more sensitively to the oxidative half-wave potential than that of PAHs possibly due to the large difference in solvation energy between the compounds and their ions.

• Economic and Environmental Geology
• /
• v.45 no.2
• /
• pp.89-104
• /
• 2012

The solubility of aluminum for two Andisol profiles formed on pyroclastic materials and basaltic rocks from Jeju Island, Korea was investigated. It is found that high organic carbon content and $Al_{pyrophosphate}/Al_{oxalate}$ ratios in the A horizons, suggesting the substantial amounts of reactive Al are associated with organic matter, whereas the low organic carbon content and the $Al_{pyrophosphate}/Al_{oxalate}$ ratios in the Bo horizons indicate that a major part of the reactive Al should be bound inorganically. The differential FT-IR spectra following acid-oxalate dissolution and heating up to 150 and $350^{\circ}C$, and transmission electron microscope (TEM) observation confirm that imogolite is in the Bo horizon. Our results of equilibration experiments demonstrate that the Al solubility in the Bo horizon for Andisols can be clarified by the congruent dissolution model for imogolite-type material (ITM), rather than by the simultaneous equilibrium with both ITM and Al hydroxy-interlayered aluminosilicate. With results from dialysis and aging procedures, it is noted that the formation of a proto imogolite sol showing its transformation to imogolite, which supports the congruent dissolution of ITM primarily controlling the Al solubility of Andisols in Jeju Island, Korea.