• 한국안전학회지
• /
• 제31권5호
• /
• pp.149-157
• /
• 2016

This paper presents the traffic speed limit of heavy vehicles at each wind velocity region, which is based on their accident risk analysis under cross-wind. The variables for the accident risk analysis are overall height, overall length, intake weight, and friction coefficient of the road surface. It was confirmed from analysis results that the risk of overturning increased with higher overall height and length, and the risk of sliding decreased with higher intake weight. The risk of sliding was largest at the friction coefficient of 0.1, and the risk of overturning was lagest at friction coefficient more than 0.25. Finally, traffic speed limit was proposed by using the accident risk analysis.

• 한국조경학회지
• /
• 제51권5호
• /
• pp.1-12
• /
• 2023

본 연구는 조경시공 및 관리분야에서 수목관리, 전지 등과 같은 고소부위 작업을 위해 주로 사용하는 삼각지지형 이동식 사다리의 전도 안정성을 평가한 것이다. 산업현장에서 사용 빈도가 높은 이동식 사다리에 포함되는 삼각지지형 이동식 사다리는 작업 특성에 따라 바닥지지 형태가 일반적인 A형의 사면지지가 아닌 삼각지지 방식이고, 작업 높이도 이동식 사다리와 비교하여 2배 이상 높기 때문에 떨어짐과 함께 작업자의 안전을 위협하는 전도 발생 가능성이 매우 높다고 할 수 있다. 따라서, 국내에서 사용되고 있는 삼각지지형 이동식 사다리를 대상으로 관련 기준인 ANSI-ASC A14.7과 EN 131-Part 7에서 규정하고 있는 전도 안정성 평가를 기반으로 하여 작업 높이에 따른 전도모멘트와 저항모멘트를 계산할 수 있는 수식을 각각 유도하여 계산한 후, 이 값을 상호 비교하여 전도에 대한 안전율 및 전도 방향에 따른 안정성을 평가하였다. 각 기준에 따른 전도 안정성 평가 결과, EN 131-Part 7의 규정을 적용하면 후면방향 8단과 측면방향으로 6단 이상의 삼각지지형 이동식 사다리는 전도에 대해서 불안정한 것으로 평가되었으나, ANSI-ASC A14.7의 규정에 의하면 방향에 상관없이 모든 단수에서 전도에 대한 안정성을 확보하고 있는 것으로 평가되었다.

• 한국기계가공학회지
• /
• 제10권4호
• /
• pp.44-49
• /
• 2011

The crawler crane, which consists of a lattice boom, a driving system, and movable vehicle, is widely used in a construction site. It needs to be installed an overload limiter to prevent the overturning accident and the fracture of structure. This research is undertaken to provide the relation formula for designing the overload limiter as follows: First the relation formulas between the wire-rope tension and the hoisting load or the overturning ratio according to the luffing angle and length of a lattice boom are established. Secondly the derived formulas are corrected by using the compensated angle considering the deflection of boom through the finite element analysis. The stiffness analysis is carried out for 30-kinds of models as a combination of 6-kinds of luffing angle and 5-kinds of length of boom. Finally the shape design of a stick type load cell, which is the device to measure the wire-rope tension, is performed. 5-kinds of notch radius and 5-kinds of center hole radius are adopted as the design parameter for the strength analysis of the load cell.

• 한국기계가공학회지
• /
• 제9권1호
• /
• pp.35-41
• /
• 2010

An overload limiter is used to prevent its overturning accident during an operation of a movable crane. Recently the indirect measuring method, which measures hoisting load and overturning moment of overload limiter, demands instead of the existing method, which measures only hoisting load. The indirectly measuring method is how to conduct the hoisting load and overturning moment as measuring the load of hydraulic cylinder for a luffing driving of boom. So we need to develop the multi-angular pin type load cell with the measuring angle of ${\pm}10$ degree instead of the existing load cell with the measuring angle of ${\pm}2$ degree. In this study the finite element analysis is conducted to evaluate the effect of the aspect ratio of measuring cross section on the measuring limit of the load cell to develop the many-angular pin type load cell. For this investigation, the aspect ratio of measuring cross section and load applying angle were adopted as design parameters and the stresses of measuring part were evaluated for each parameter.

• 한국조경학회지
• /
• 제52권3호
• /
• pp.76-88
• /
• 2024

이동식 사다리를 이용한 고소작업은 조경을 포함한 건설업에서 떨어짐 또는 전도 사고의 주요 원인이라고 할 수 있다. 이동식 사다리는 버팀대의 수와 지지 조건에 따라 A형과 삼각지지로 구분되며, A형과 비교하여 3개의 버팀대로만 바닥을 지지하는 삼각지지 이동식 사다리는 상대적으로 전도에 대한 불안정성이 높다고 할 수 있다. 이에 본 연구에서는 국내에서 사용되는 삼각지지 이동식 사다리의 제원과 EN131-Part 7의 전도 안정성 평가 규정을 이용하여 전도가 발생할 수 있는 모든 방향에 대해서 전도 및 저항모멘트 계산식을 유도하여 대상 사다리의 모멘트를 계산하고, 이로부터 방향별 전도 안정성을 평가하였다. 이에 따르면 방향에 따라 차이는 있지만 대부분 8단 이상에서 전도에 대해 불안정한 것으로 나타났다. 이 결과를 바탕으로 삼각지지 이동식 사다리가 전도 안정성을 확보할 수 있도록 사다리의 무게, 깊이 또는 폭과 같은 제원의 변경과 전도방지장치인 아웃트리거를 설치하여 저항모멘트를 확대할 수 있는 대책을 제안하였다. 그러나 이들 대책 중 제원을 변경하는 경우에는 증가되는 크기가 과도하여 적용성이 부족한 반면에 아웃트리거는 최소한의 펼침길이만으로도 전도 안정성을 확보할 수 있으므로 적용이 가능한 현실적인 대책이라고 할 수 있다.

• 한국전자통신학회논문지
• /
• 제13권6호
• /
• pp.1365-1372
• /
• 2018

최근 농업 사회의 고령화로 인해 농기계로 인한 안전사고가 급증하고 있다. 어떤 경우에는 부상자가 사고를 주위에 알리지 못한 채 홀로 방치되어 심각한 상황에 이를 수 있다. 경운기, 이앙기, 트랙터, 콤바인 등 농기계를 대상으로 작업 및 이동 중에 전복, 충돌, 기타 사고 등의 안전사고 발생 시 ICT 기술을 이용하여 신속하게 사고 상황을 외부에서 감지하고 전달함으로써 인명 피해를 최소화 할 수 있는 시스템이 요구되고 있다. 본 연구에서는 농기계의 충돌 및 전복 사고를 감지하고, 위험상황을 전송하는 ICT 기반의 농기계 안전사고 자동상황전파시스템을 제안한다. 제안된 시스템은 농기계 사고 발생 시 자동으로 가족, 지인, 병원 및 119로 문자 메시지를 보냄으로써 빠른 사후 조치를 통한 인명구조를 가능하게 한다.

• Journal of Chest Surgery
• /
• 제14권1호
• /
• pp.83-86
• /
• 1981

Eight cases by power tiller accidents experienced for 3 years from Jan. 1978 to Dec. 1980 were studied clinically. The results are as follows: 1. The most of the patients were thirties to fifties, and the incidence rate of male to female 7:1. 2. The common injuries were hemopneumothorax and multiple rib fractures [respectively and the other associated injuries were hepatic and delayed splenic ruptures, and fractures of the another sites. 3. The accident forms were overturning [50.0%], falling down from the power tiller [37.5%], and collision against the power tiller [12.5%]. 4. All of the drivers and 75% of the passengers in the patients were drunken states at the accident time. 5. The common methods of treatment were closed thoracostomy [62.5%], conservative treatment [37.5%], and exploratory laparotomy [25.0%].

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2007년도 춘계학술대회 논문집
• /
• pp.1770-1773
• /
• 2007

Fire accident in tunnel is one of the most critical railway accidents, together with overturning of train by derailment and train crash. Tunnel structures contribute to minimize the cost and time of transport, but in case of railway fire accident occurring bring serious damages of human life caused by narrowness of shelter, poisonous smoke and high temperature raised at the inside of tunnel. For that reason, at the beginning of plan of tunnel, the optimum design for rescue of passengers is needed. For the detail and most suitable design for rescue of passengers, many tunnel designer substituted simulation program for mock examination by its high cost and effort. In this study, simulation program techniques, such as Fluent and Simulex, are applied for verifying the rescue design of passengers reduced the risk when fire accident occurred at tunnel utilizing of case study for planned railway tunnels shows 1,245m length in Iksan-Sili area.

• International Journal of Safety
• /
• 제4권2호
• /
• pp.43-46
• /
• 2005

The construction workers might be at the risk of many occupational injuries and illnesses. To protect workers from various hazards, industrial health and hygiene systems were specified for the construction workers by law. It is important to know the actual health and safety(H&S) conditions by tasks and the characteristics of injuries and illnesses of construction workers. This study was designed to investigate the actual conditions of construction workers exposed to various harmful substances and work elements including evaluation of health status of each worker and general H&S system. Questionnaire was sent to 600 construction workers nationwide and totally 367 people responded to it having 61.67% of response rate. The common construction hazards were dust(29.6%), noise(19.3%), repetitive motions(12.0%), handling excessive heavy materials(11.2%) in order. The repetitive motions and handling heavy materials related to muscle disorders accounted for 23.2%. The accident and injury types were in order of overexertion, falling, overturning, dropping or flying, electric shock, collision, etc.

• 한국안전학회지
• /
• 제8권2호
• /
• pp.16-22
• /
• 1993

Accidents, especially fatal accidents in construction work are being not reduced, but increased, despite of more concerns of related authority and companies themselves. It is investigated that major reasons of which these accident increase are caused to set up wrong temporary structures : scaffolding with insufficient components or safety guards. Approximately 50% of falling accident, one of three major accidents； falling collapsing of structures or soil, accidents from heavy equipments, are due to defects of temporary structures. Therefore, technical standards for these temporary structures made by the ministry of labour in 1984, should be promptly revised because of its insufficient considerations for structural concepts. A method to effectively ensure the construction safety are shown through an experimental method, mathematical analysis structural planning against overturning and collapsing of scaffold-ing components, consideration of safety factor in loading, formulations of safety structure against falling or dropping from schaffolding.