• Proceedings of the Korea Water Resources Association Conference
• /
• 2020.06a
• /
• pp.54-54
• /
• 2020

본 연구에서는 제방의 세굴이나 붕괴를 방지하기 위해 바이오폴리머(Biopolymer) 기반 신소재를 활용한 흙 제방의 보강공법을 제시하였다. 바이오폴리머 기반 제방의 보강공법은 흙과 바이오폴리머를 소량만 섞어도 흙의 강도 증진시킴과 동시에 빗물에 대한 내침식성과 식생의 생장을 촉진하는 생태성도 뛰어나기 때문에 제방 사면을 보호할 수 있는 친환경적이고 효율적인 공법이다. 이에 안동하천연구센터는 실증실험을 통한 신소재 제방 보강공법의 안정성 검증을 목표로 2 건의 월류붕괴 실험을 수행하였다. 첫 번째는 흙 제방 조건(Case 1)이며, 두 번째는 바이오폴리머 혼합 토양을 사면에 도포한 후 식생이 활착된 조건(Case 2)이다. 제방 붕괴에 따른 수로 내 수위변화를 측정하기 위해 압력식 수위계를 설치하였으며, 영상분석을 위한 다수의 카메라 및 드론을 활용하여 실험의 전 과정을 실시간 촬영하였다. 또한, 제내지 측 사면을 대상으로 월류에 따른 붕괴 지연효과를 정량적으로 제시하기 위해 이미지 픽셀 변화 측정 기법을 통한 시간에 따른 표면 손실률을 산정하였다. 흙 제방과 신소재 처리 제방의 시간에 따른 표면손실률을 비교한 결과, Case 2의 사면손실률이 Case 1에 비해 약 1.5~2.3 배 지연되는 것을 확인하였다. 하지만 단일 조건만으로 실험군과 비교군의 붕괴지연 결과가 제방 성능을 평가함에 있어서 일반화될 수 없으므로 이러한 정량적 평가는 다소 한계가 있다. 향후 이러한 부족한 부분을 해결하기 위한 노력과 다양한 조건의 추가실험을 통한 계측 데이터 및 붕괴지연시간의 평균값을 도출하여 신소재 제방의 안정성을 평가하기 위한 타당한 결과를 도출할 예정이다.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2021.06a
• /
• pp.211-211
• /
• 2021

최근에 기후변화로 인한 한반도에 내습하는 태풍에 빈도는 점차 증가하고 있다. 2020년도 8월 26일 태풍 '바비', 9월 2일 태풍 '마이삭', 9월 7일 태풍 '하이선'은 일주일 내의 간격으로 한반도를 내습하였다. 한반도에 내습한 태풍 중에서 마이삭과 하이선은 동쪽 해역을 지나가면서 강풍과 많은 강우를 초래하였다. 그 결과 특정 원전은 자동 가동중지가 발생되는 사태를 야기 시켰다. 본 연구에서는 원자력 발전소 인근 해역에서 폭풍해일에 의한 가능최대파고 높이를 추정함으로써 발전소 안전성에 대한 검토에 목적을 두고 있다. 이를 위해 첫 번째로 '2019 전국 심해 설계파 산출 보고서'를 바탕으로 원전 인근 해역 심해 설계파 지점에 대해 파고, 주기, 해상풍과 같은 변수들을 분석하였다. 그 결과를 바탕으로 100년부터 1000만년까지의 변수들을 예측하였다. 두 번째로 해도자료를 바탕으로 GIS를 통한 지형자료를 구축하였다. 구축된 지형자료를 바탕으로 SWAN 모델의 기초자료를 구성하였다. 세 번째로 추정된 변수들과 구축된 지형자료를 바탕으로 100년부터 1000만년까지의 시나리오별 SWAN 시뮬레이션을 통해서 원전 인근 해역에 대한 가능 최대 파고 높이를 분석하였다. 그 결과를 바탕으로 특정 원전인근 해역에서의 평균적인 파고 높이에 대한 재해도 곡선을 추정하고 제시하였다. 본 연구를 바탕으로 향후 확률론적인 분석 방법을 적용하여 불확실성을 고려한 재해도 곡선 추정 과정의 기초자료로 활용될 수 있다. 또한 EurOtop을 적용하여 파고 높이에 따른 원전부지의 Overtopping을 추정하고, 최종적으로 폭풍해일에 의한 원전부지의 2차원 침수해석의 기초자료로 활용할 수 있을 것으로 판단된다. 이를 통해 홍수 방지 및 예방과 관련한 홍수저감 활동과 관련된 통제실 외부 시설물에 대한 수동 조작에 대한 안전성 평가가 이루어질 수 있겠다.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.35 no.5
• /
• pp.102-108
• /
• 2023

In this study, hydraulic model tests were performed to investigate the stability of armor units at harbor side slope for rubble mound structures. The armor units on the rear slope were rocks. The Korean design standard for harbor and fishery port suggested the design figures that showed the ratio of the armor weight for each location of rubble mound structures and it could be known that the same weight ratio was needed to the sea side and rear side slope of rubble mound structures. The crest elements were commonly applied to the design process of rubble mound structures in Korea and the investigation of the effects of super structures would be needed. The damage rate (S =2) was applied and the stable wave height was measured for each test condition. The results were suggested as the armor weight ratio of the rear side slope(armor rock) to the sea side slope (tetrapod) in relation to the relative crest height.

• Journal of Korea Water Resources Association
• /
• v.50 no.4
• /
• pp.277-288
• /
• 2017

A probabilistic risk analysis of levee system estimates the overall level of flood risk associated with the levee system, according to a series of possible flood scenarios. It requires the uncertainty analysis of all the risk components, including hydrological, hydraulic and geotechnical parts computed by employing MCMC (Markov Chain Monte Carlo), MCS (Monte Carlo Simulation) and FOSM (First-Order Second Moment), presents a joint probability combined each probability. The methodology was applied to a 12.5 km reach from upstream to downstream of the Gangjeong-Goryeong weir, including 6 levee reaches, in Nakdong river. Overtopping risks were estimated by computing flood stage corresponding to 100/200 year high quantile (97.5%) design flood causing levee overflow. Geotechnical risks were evaluated by considering seepage, slope stability, and rapid drawdown along the levee reach without overflow. A probability-based compound risk will contribute to rising effect of safety and economic aspects for levee design, then expect to use the index for riverside structure design in the future.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.29 no.6
• /
• pp.410-418
• /
• 2017

The stability of low-crested structure (LCS) and overtopping discharge over a seawall behind the LCS are influenced by the water level behind the structure. Hence, the experimental results can be distorted unless the increase of water level is known when two-dimensional experiment is carried out. In order to estimate increase of the mean water level behind the low-crested structure, this study applied a hybrid technique that combined results of two-dimensional model test and hydrodynamic numerical modeling based on the relationship between the water level and discharge. By using this technique, the mean water level increase and flow field can be obtained almost at the same time, which resolved the above problem considerably. In addition, this method can provide an approximate information about the outflow velocity from the openings of the structure, which is helpful for selecting appropriate planar configuration of the low-crested structure.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.6
• /
• pp.737-743
• /
• 2016

Coastal hazards such as high waves are expected to increase due to global climate change. Therefore, we investigated new armor unit structures for disaster prevention. Recently, a concrete caisson has been used in many breakwaters against high waves in South Korea, but the demand for concrete armor unit has increased due to the high cost and many installation requirements. Though many new armor units have been developed over the world since Tetrapod in 1950, few have been used due to lack of systematical development. The representative armor units in current use have many advantages, but they cannot be applied to waves higher than 8 m. One of the new armor units developed by the design guide based on recent trend and hydraulic model experiments were conducted. The new armor unit was developed as a single layer due to cost effectiveness. However, the thickness is close to 1.5 times by overlapping the alphabet A and V. It showed higher overtopping compared to a double layer because of the thickness and the high packing density. It has a high interlocking vertically but low horizontally. It shows good stability at 9 m in model testing.

• Journal of the Korea Concrete Institute
• /
• v.16 no.6 s.84
• /
• pp.841-850
• /
• 2004

The modeling of uplift pressure within dam, on the foundation on which it was constructed, and on the interface between the dam and foundation is a critical aspect in the analysis of concrete gravity dams, i.e. crack stability in concrete dam can correctly be predicted when uplift pressures are accurately modelled. Current models consider a uniform uplift distribution, but recent experimental results show that it varies along the crack faces and the procedures for modeling uplift pressures are well established for the traditional hand-calculation methods, but this is not the case for finite element (FE) analysis. In large structures, such as dams, because of smaller size of the fracture process zone with respect to the structure size, limited errors should occur under the assumptions of linear elastic fracture mechanics (LEFM). In this paper, the fracture behaviour of concrete gravity dams mainly subjected to uplift Pressure at the crack face was studied. Triangular type, trapezoidal type and parabolic type distribution of the uplift pressure including uniform type were considered in case of evaluating stress intensity factor by surface integral method. The effects of body forces, overtopping pressures are also considered and a parametric study of gravity dams under the assumption of LEFM is performed.

• Journal of Korean Society of Coastal and Ocean Engineers
• /
• v.18 no.4
• /
• pp.329-337
• /
• 2006

A small hydro-power plant operated by cooling water discharged from the power plant is under construction. In this study, the flow characteristics of the effluent channel and the outfall coastal zone in which the facilities are constructed have been measured and analysed. The flow pattern is highly dependent on the effluent discharge and clearly classified as these typical areas; the upstream and downstream areas of the weir, and the outfall coastal zone. The discharge and the width of the channel in the upstream area of the weir are increased step by step, so the water level fluctuation is small. The flow overtopping the weir is rapidly changing and has highly vertical fluctuation patterns after hydraulic jump just below the weir. The flow pattern in the outfall zone is directed toward the seaward direction and the velocity is dominated by the tidal level fluctuation. The mean tidal range in this area is about 10% greater than that of the Tongyeong tidal gauging station and the wave effects are negligible because of the sheltering effects of this area.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.26 no.5
• /
• pp.506-513
• /
• 2020

Due to climate change, there is an increasing risk of complex (hybrid) disasters, comprising rising sea-levels, typhoons, and torrential rains. This study focuses on Marine City, Busan, a new residential city built on a former landfill site in Suyeong Bay, which recently suffered massive flood damage following a combination of typhoons, storm surges, and wave overtopping and run-up. Preparations for similar complex disasters in future will depend on risk impact assessment and prioritization to establish appropriate countermeasures. A framework was first developed for this study, followed by the collection of data on flood prediction and socioeconomic risk factors. Five socioeconomic risk factors were identified: (1) population density, (2) basement accommodation, (3) building density and design, (4) design of sidewalks, and (5) design of roads. For each factor, absolute criteria were determined with which to assess their level of risk, while expert surveys were consulted to weight each factor. The results were classified into four levels and the risk level was calculated according to the sea-level rise predictions for the year 2100 and a 100-year return period for storm surge and rainfall: Attention 43 %, Caution 24 %, Alert 21 %, and Danger 11 %. Finally, each level, indicated by a different color, was depicted on a complex disaster risk map.

• Journal of the Korean Geotechnical Society
• /
• v.34 no.3
• /
• pp.13-27
• /
• 2018

To study how stable the rubble mound breakwaters are, one can look to the research of wave induced seepage flow through the pores of the rubble mound. Seepage flow is generally generated by the difference between the water level around the breakwater during a typhoon. The existing stability analysis method of the rubble mound is the static analysis which simply considers the force equilibrium taking into account the horizontal force acting on the concrete block induced by a wave (calculated by Goda equation) and the vertical force induced by the weight inclusive of the concrete block, quarry run, filter, and armor layer above the slipping plane. However, this static method does not consider the wave-induced seepage flow in the rubble mound. Such seepage may decrease the stability of the rubble mound. The stability of a rubble mound breakwater under the action of seepage was studied based on the results of CFD software (OpenFOAM) and Limit Equilibrium Method (GeoStudio). The numerical analysis result showed that the seepage flow decreased the stability of the rubble mound breakwaters. The results of the numerical analyses also revealed the stability of the rubble mound was varied with time. Especially, the most critical state happened at the condition of overtopping the concrete block, acting strong uplift pressure raising along side and underneath the concrete block, and generating high pore pressure inside rubble mound due to seepage flow. Therefore, it may be necessary to conduct a dynamic analysis considering the effect of wave-induce seepage flow together with the static analysis.