• 산업공학
• /
• 제24권4호
• /
• pp.274-280
• /
• 2011

Delayed access to surgery may lead to deterioration in the patient condition, poor clinical outcomes, increase in the probability of emergency admission, or even death. The purpose of this work is to decide the number of patients selected from a waiting list and to schedule them in accordance with the operating room capacity in the next period. We formulate the problem as an infinite horizon Markov Decision Process (MDP), which attempts to strike a balance between the patient waiting times and overtime works. Structural properties of the proposed model are investigated to facilitate the solution procedure. The proposed procedure modifies the conventional value iteration method along with the binary search technique. An example of the optimal policy is provided, and computational results are given to show that the proposed procedure improves computational efficiency.

• 경영과학
• /
• 제20권2호
• /
• pp.33-43
• /
• 2003

In this paper we applied dynamic programming to determining work schedule type. In dynamic programming formulation, each day during a planning horizon represents a stage for which a decision is made. The alternatives are given by work schedule types that combine regular time, overtime, additional shift, and so on. In this case, their associated return function is labor cost. The state is defined as the amount of work time allocated to stage 1, stage 2,…, and current stage. A case study for a real manufacturing company was performed to apply dynamic programming to scheduling daily work hours during a week. The case study showed that total cost of our solution derived from dynamic programming decreased by about 6％ as compared with the solution obtained from the previous method.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2000년도 추계종합학술대회
• /
• pp.581-584
• /
• 2000

This paper describes the effect of lightning impulse current on ZnO varistors(390 V, 6.5 kA) used in low-voltage AC mains as a protective device against transient overvoltages. A lightning impulse current standardized in IEC 61000-4-5 is applied to the varistors, and the energy applied to the varistor at each time is about 12 J. In the experiment, various Parameters such as leakage current, reference voltage are measured with the number of applied impulse current. Also, micro-structure changes of the varistors after applying the lightning impulse current of 200 times are compared. The electrical characteristics of the varistors are degraded by overtime impulse current, showing increase in leakage current and decrease in reference voltage.

• 한국실천공학교육학회논문지
• /
• 제4권1호
• /
• pp.65-71
• /
• 2012

이 연구에서는 LabVIEW와 NI ELVIS를 이용하여 컴퓨터 기반의 공학교육 사례 즉 다양한 컴퓨터 기반의 공학실습을 소개한다. 여러 유명대학이나 연구소, 회사 등에서 웹/인터넷 또는 네트웍으로 제어되는 원격 실험과 같은 형태의 원격 실습이 가능하다. 컴퓨터 및 그래피칼프로그래밍 기술의 공학실습교육 적용을 통하여 공학 실험실습의 흥미와 효과를 제고하였다.

• 한국컴퓨터정보학회논문지
• /
• 제20권7호
• /
• pp.115-120
• /
• 2015

The old people's feelings, emotions, and self-evaluative judgements fluctuate overtime. The purpose of this paper is to proof relations among well-being factors in social activity. Major results of this paper was as follows. First, the social activity participated elderly had higher health status, self-esteem, mental-health, and successful aging than the non-participated elderly. Second, self-esteem and mental health were exposed as important variable for all of the two groups to improve the successful aging. Thus, self-esteem and mental health can become significant indicator of self-empowering and psychological resilience. Third, the strongest total causal effect of successful aging was health status in social activity participated elderly, while self-esteem was the greatest total causal effect of it in the non-participated elderly. Health status had higher indirect effect of successful aging than direct effect of it in both of them.

• 대한인간공학회지
• /
• 제25권4호
• /
• pp.1-7
• /
• 2006

The purpose of this study is to develop an efficient algorithm for the management of the shift schedule in nuclear power plants in consideration with the ergonomic criteria and the regulatory codes. The ergonomic criteria considered are the work hours, overtime-work frequency and working time, start and finishing time of works, allocation of rest times and duty-offs, rotating of shifts, etc. to comply with the regulations such as the Labor Standard Act, the ILO Convention No. 171, 178, "the detailed content of a periodic safety review," enforcement regulations 19-2 of the Atomic Energy Act. The developed algorithm for the shift schedule program adopts a heuristic method to minimize the difference the workload for shift workers in nuclear power plants.

• 대한산업공학회지
• /
• 제30권1호
• /
• pp.50-57
• /
• 2004

The aim of this study is to collect driver's psychophysiological signal under various road condition and to select and quantify psychophysiological variables for diagnosis of road-driver compatibility. A 4x4 vehicle with measuring devices was developed to collect driver's psychophysiological signal and collected driver's psychophysiological signal under various road conditions. The collected data were analyzed by the temporal pattern of signal overtime. Thirteen bio-signals with consistent pattern were selected and quantified in terms of slope and amplitude of the signal. These quantified values could be used as a part of tool to diagnose the road-driver compatibility.

• 대한신경과학회지
• /
• 제36권4호
• /
• pp.273-279
• /
• 2018

Multiple sclerosis (MS) is a diagnosis of exclusion and the lesions or objective findings should disseminate in space and time to diagnose MS. The diagnostic criteria of MS have continuously evolved overtime. The McDonald criteria were originally proposed in 2001, and the revised 2010 McDonald criteria have been used widely. Scientific advances in the past 7 years since 2010 induced the revised 2017 McDonald criteria. All revisions relied entirely on the available evidences, and not expert opinion. In this review, we will provide an overview of the way to diagnose MS and the 2017 McDonald criteria.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.114-115
• /
• 2019

Gangform is used as exterior wall forms in the most of apartments. Existing system forms developed for high-rise building, RCS and ACS, are too heavy and over-designed to be applied to general apartments, leading to higher costs. A more simplified rail Gangform(R/GF) is also used, but it depends entirely on T/C for the lift like Gangform. The T/C's legal inactivity time for moving Gangform and materials has increased, and the higher allowances have to be paid for overtime work, thus causing to the cost increase and time delay. Therefore, this study aims to develop an automated Gangform climbing system that can be used universally and economically in apartment houses. The use of the development system is expected to improve the safety of Gangform operations and reduce the workload on T/C.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 봄 학술논문 발표대회
• /
• pp.30-31
• /
• 2021

The construction industry is an industry in which skilled construction workers should be secured and trained because of the quality and productivity of buildings, but the negative image makes it difficult to supply and demand skilled construction workers. In response, this study derived the factors influencing the intention of transferring construction workers to other occupations and investigated ways to improve the prevention of leaving other occupations by age of construction workers. The factors influencing the turnover of construction workers have also been derived, and work overload, salary, workplace stability, and employment competitiveness have a significant impact on the intention of new employees to change jobs. According to a survey on ways to improve the prevention of leaving other jobs, those in their 20s and 30s are "improving working conditions, such as providing holidays, paying overtime, compliance with working hours," and those in their 50s and 60s.