• Journal of the Korean Association of Geographic Information Studies
• /
• v.16 no.2
• /
• pp.30-46
• /
• 2013

Using ArcGIS Model Builder, with emphasis on the importance of ecology and user friendliness, a model for site selecting tool is developed. This tool is developed by establishing standardized method for data selection and analysis with evaluation criteria using GIS. For this task, our first action was to objectively define and establish 18 elements to evaluate the potentiality of the site based on extensive literature reviews. These 18 elements reflect environmental, social/cultural and legal aspects that may influence the decision process to select the desired site. Secondly, using ArcGIS Model Builder, 18 analytical elements were made into thematic mapping which represent systematically organized graphic input to the model with automatic double check system and overlay analysis capability. Thirdly, to validate the effectiveness of the developed model, site location analysis was performed using the actual site, Buk-ku, Pohang.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2007.04a
• /
• pp.261-264
• /
• 2007

In this study, I wished to forecast damage district by tsunami's occurrence. For this, analyzed tsunami that can happen in our country's neighborhood sea area using past data, and established tsunami's scenario by imagination with analysis result. I created 3D topographical model about study area and analyzed inundation area by achieving simulation by scenario. Also, result of simulation does overlay with digital map and manufactured imagination inundation map. This study result may offer as basic data for operation of tsunami's forecast/alarm system and making of disaster prevention policy.

• Journal of Korea Multimedia Society
• /
• v.15 no.12
• /
• pp.1492-1498
• /
• 2012

One of the major issues in current internet architecture is that it was not designed to support the user mobility. In order to overcome this restriction, in this paper, we propose an identifier/locator separation architecture which contain the overlay mapping system to store the identifier-to-locator mapping record. In addition, we design the mobility management scheme base on Identifier/Locator separation above for Furture Internet architecture. We then devise the analysis model to evaluate the signaling cost of our scheme. By conducting the simulation. we show that our scheme can operate with lower signaling cost than other schemes.

• Proceedings of the KSRS Conference
• /
• 2002.10a
• /
• pp.292-296
• /
• 2002

This study has been accomplished as a experimental study for field application of 3D Perspective Image Map creation using Digital Topographical Map and based on the Ortho-Projection Image which is generated from Satellite Overlay Images and the precise Relative Coordinates of longitude, latitude and altitude which is corrected by GCP(Ground Control Point). AS to Contour Lines Map which is created by Coordinate conversion of 1:5,000 Topographical Map, we firstly made Satellite Image Map to substitute for Digital Topographical Map through overlapping the original images on top of each Ortho-Projection Image created and checking the accuracy. In addition to 3D Image Map creation for 3D Terrain analysis of a target district, Slope Gradient Analysis, Aspect Analysis and Terrain Elevation Model generation, multidirectional 3D Image generation by DEM can be carried out through this study. This study is to develop a mapping technology with which we can generate 3D Satellite Images of a target district through the composition of Digital Maps and Facility Blueprint and arbitrarily create 3D Perspective Images of the target district from any view point.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2008.10a
• /
• pp.251-253
• /
• 2008

Erosion and landslide cause serious damage to forest areas. As a consequence, partial or complete destruction of vegetation occurs, which leads to many cascading problems. In this study, an attempt has been made to identify the forest areas, which are under different risk categories of erosion and landslide, in part of Eastern Ghats of Tamil Nadu. Relevantthematic maps were generated from satellite data, topographical maps, primary and secondary data and weights to each map were assigned appropriately. Weighted overlay analysis was carried out to identify the erosionprone forest areas. The result of erosion and landslide prone model reveals that 4712 ha(17%) of forest area is under high risk category and 15879 ha(58.65%) isunder medium risk category. The results of spatial modeling would be very much useful to the forest officials and conservationist to plan for effective conservation.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2005.11a
• /
• pp.61-64
• /
• 2005

Recently to repair the structure of deteriorated concrete, LMC rehabilitation method is introduced. however, this method has the possible risks of brittle failure depending on bond performance of the interface. the prediction of interfacial behavior becomes essential to protect the failure. all of the studies which have been done about this field are only about material property such as strength, durability, bond. there is not enough data and studies about structural behavior and numerical analysis. therefore, in this study A flexural nonlinear analysis model of ABAQUS was proposed to predict the load-deflection response, interfacial stress, and ultimate strength. The parameter study showed that overlay thickness was a main influencing factor to the behavior of RC beam overlayed by LMC.

• ETRI Journal
• /
• v.34 no.4
• /
• pp.492-502
• /
• 2012

We consider an overlaid broadcast service, where a spread spectrum (SS)-based broadcast signal is overlaid onto the existing terrestrial Digital Multimedia Broadcasting (T-DMB) band. The system is similar to the augmented data transmission in the ATSC DTV, for which it was investigated mostly in terms of link level performance, such as bit error rate. Our focus in this paper is on the system-level performances. More specifically, utilizing both a large scale path loss and a small scale fading channel model, the primary objective is to explore the tradeoff between the coverage and the achievable rate of the overlaid service and, finally, to determine the achievable rate in the overlaid service for marginal coverage reduction in the existing broadcast service. The analytical and simulation results show that an SS-based add-on service of 10 kbps to 20 kbps can co-exist with the T-DMB service while resulting in only a marginal degradation in T-DMB coverage (for example, less than one percent reduction).

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.11a
• /
• pp.519-522
• /
• 2004

The purpose of this research is to design a road using digital photogrammatry method to generate DEM(digital elevation model) and digital ortho image based on GSIS which was applied to the road simulation. The example study area was the suburbs of Jeju city. To this study, 1/5,000 digital map and GSIS technique were used for optimum road design of the island based on Arc View software. Using this software we can Set an overlay map by combination of hill shade map, slope map, aspect map, and building buffer map. Based on this overlap map, we designed the best road line and along this line we performed three dimensional road simulation using Microstation CAD and Inroads road design programs. From the results, we found that the DEM and digital ortho image acquired from stereoairphoto using digital photogrammatry was satisfied for choosing the best roadline and the developed three dimensional road simulation technique using GSIS technique was very useful to estimate the reasonable road design before the real road construction works.

• Proceedings of the Korea Concrete Institute Conference
• /
• 1997.04a
• /
• pp.442-448
• /
• 1997

An analytical method based on the nonlinear layered finite element method is developed to simulate the load-dsflection behavior of strengthened beams. Beams considered in this study are the ones strengthened either with external steel plate or Carbon Fiber Sheets(CFS) bonded to the overlay soffit. The theoretically obtained load-deflections and strains of the strengthened beams are compared to the corresponding experimental values. Parametric studies are, then. performed using the developed model to investigate the effects of design variables on the flexural behavior of the strengthened beams. Simply supported beams under monotonically increasing loads sre considered exclusively.

• Annual Conference of KIPS
• /
• 2009.04a
• /
• pp.1151-1154
• /
• 2009

인터넷 상에서 VoD 서비스를 제공하기 위해서는 시스템 자원과 네트워크 대역폭을 효율적으로 사용해야 한다. 이러한 효율성을 높이기 위한 대안으로 오버레이 멀티캐스트를 생각 할 수 있지만 실제로 On-Demand 서비스에 적용하기 위해서는 많은 결점의 보완이 필요하다. 본 논문에서는 이러한 결점을 보완하고 기존 시스템 환경의 간단한 확장으로 VoD 서버의 자원과 대역폭을 효율적으로 사용할 수 있는 오버레이 멀티캐스트 모델을 제안 한다.