• 한국통신학회논문지
• /
• 제24권12B호
• /
• pp.2320-2334
• /
• 1999

본 논문에서는 최근 들어 본격적인 연구개발이 활성화되고 있는 무선 데이터 통신서비스를 근간으로 한 미세정보 감시 시스템(RMIMS: radio interfaced micro information monitoring system or MICROS: micro information and communication remote object-oriented system)에 대한 QoS(quality of service, ex: packet loss)를 보장하는 새로운 움직이는 다중 기지국(multiple IS-MMBS) 서비스 방법을 제안하였다. MMBS 서비스 지역에서 실시간 트래픽 형태의 RMIMS 터미널 응용서비스가 발생하거나 서비스 지역에 배치되는 RMIMS 터미널 수의 증가 또는 높은 전송대역폭을 요구하는 RMIMS 응용서비스 등으로 인하여 하나의 IS-MMBS 만으로는 기 서비스 중인 RMIMS 터미널 및 신규RMIMS 터미널에 대한 패킷 손실 여부 같은 QoS를 만족하는 서비스가 불가능한 경우가 발생한다. 이러한 경우에 다중 IS-MMBS을 이용하여 RMIMS 터미널의 QoS를 보장하는 MMBS 서비스를 제공할 수 있다. 제안한 다중 IS-MMBS 서비스 모드는 RMIMS 클러스터링 방법과 MMBS 세그먼트(segment) 방법에 따라 터미널 분할방법(terminal segment method), 영역 분할방법(region segment method ), 응용서비스별 분할방법(application based segment method), 트래픽 타입별 분할방법(traffic type based method), 중첩 분할방법(overlapping segment method), 복합 분할방법(hybrid segment method)으로 분류 제안하였다.

• 대한전자공학회논문지
• /
• 제24권6호
• /
• pp.1005-1012
• /
• 1987

An adaptive scalar DCT-Wiener filtering method that can be applied to the problem of restoring an image degraded by white Gaussian noise is presented. In this method, the power spectrum needed to Winer filering is adaptively estimated in block-wise according to the lical properties in transform domain. In addition, overlapping method for reducing the block artifact is considered. Experimental results show that the adaptive Wiener filter by the proposed method yields performance improvement and better image quality over the nonadaptive one and the spatial Lee filter.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 추계학술대회 논문집
• /
• pp.426-430
• /
• 2008

Hot shear-welding is a process of bonding two plates together by using shearing stress in a controlled manner. This study dealt with the hot shear-welding process of two aluminum plates. These two plates were piles up in the shear-welding mold. Due to the shearing stress, these two plates were cut off longitudinally, and meantime they were welded together. During this process the control of the surplus material flow is very important, and it can be realized by designing the overlapping length and the shape of the cavity. The commercial software Deform-3D was employed to predict the effect of these two factors. The overlapping length and the shape of the cavity that presents the optimum design was then developed to get a good shear-welding process.

• 한국안전학회지
• /
• 제28권6호
• /
• pp.57-63
• /
• 2013

This paper discusses 2D models of beams for simulating the fracture of brittle materials. A simulation of an experiment on a concrete beam subjected to bending, in which two overlapping cracks occur, is used to study the effect of individual beam characteristics and different arrangements of the beams in the overall network mesh. It was found that any regular orientation of the beams influences the resulting crack patterns. Methods to implement a wide range of poisson's ratios are also developed, the use of the mesh to study arbitrary micro-structures is outlined. The crack pattern that are obtained with mesh are in good agreement with the experimental results. Also, numerical simulations of the tests were performed by means of a model, and non-integer dimensions were measured on the predicted mesh damage patterns.

• 한국전자파학회:학술대회논문집
• /
• 한국전자파학회 2005년도 종합학술발표회 논문집 Vol.15 No.1
• /
• pp.175-178
• /
• 2005

중첩 T블록 방법을 이용하여 네모난 금속 홈에 평면파가 입사되는 경우의 해석적인 산란해를 구한다. 여러 개의 금속 홈이 있는 경우에도 각 영역을 세부 영역으로 나누어 수치효율을 증대시킨다. 최종 산란해가 빠른 적분식을 가진 간단한 닫힌 해로 표시된다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.597-601
• /
• 1996

Nowadays, the STL format, industrial standard data, which approximates three dimensional CAD model to triangular facets, is used for RP(Rapid Prototyping) system. Because most RP machine is accpted to only two dimensional line segments, but some STL translators are sometimes poorly implemented. The error verifying process is as follows. 1) Remove facets with two or more vertices equal to each other. 2) Fix overlapping error such as more than three facets adjacent to an edge. 3) Fill holes in the mesh by using Delaunay triangulation method. 4) Repair wrong direction and value of normal vectors. This paper is concerned with searching the mentioned errors in advance and modifying them.

• Journal of international Conference on Electrical Machines and Systems
• /
• 제2권1호
• /
• pp.16-22
• /
• 2013

This paper presents the analysis and optimization of air-core permanent magnet linear synchronous motor with overlapping concentrated windings to achieve high thrust density, high thrust per copper losses and low thrust ripple. For the motor design, we adopt equivalent magnetizing current (EMC) method to analyze the magnetic field and give analytical formulae for calculation of motor parameters such as no-load back EMF, dynamic force, thrust density and thrust per copper losses. Further, we proposed a multi-objective optimization by genetic algorithm to search for the optimum parameters. The design optimization is verified by 2-D Finite Element analysis (FEA).

• 소성∙가공
• /
• 제20권8호
• /
• pp.575-580
• /
• 2011

Direct laser melting(DLM) is promising as a joining method for producing parts for automobiles, aerospace, marine and medical applications. An advantageous characteristic of DLM is that it affects the parent metal very little. The mechanical properties of parts made by DLM are strongly affected by the porosity and surface roughness of the laser melted beads. This is a systematic study of the effects of the porosity and surface roughness of laser melted beads using various processing parameters, such as laser power, scan rate and overlapping ratio of the fill spacing. The specimens were fabricated with 316L and 304L austenitic stainless steel powder. Dense parts with low porosity were obtained at low laser scan speed, as it increased the aspect ratio of the parental material and the depth of penetration. The variations of surface roughness were examined at various processing parameters such as overlapping ratio and laser power.

• 한국산학기술학회:학술대회논문집
• /
• 한국산학기술학회 2003년도 Proceeding
• /
• pp.45-49
• /
• 2003

GDS (Grating automatic Drawing System), which is automatic design system of metal products called grating, is a system that produces various detailed drawings on the basis of information within a Plan Drawing that represents layout of the gratings such as locations, shapes, directions, etc However, automatically produced drawings by GDS do not fully satisfy the standard of the general dimension marking method used among the layout designers. The lack of this standard quality mainly results from the fact that overlapping among dimension markings appears frequently. To solve the overlapping problem we applied the rule-based expert system. The rules for the expert system are designed based on the expertise of skilled layout designers within the grating production lines.

• Bulletin of the Korean Chemical Society
• /
• 제20권9호
• /
• pp.1073-1077
• /
• 1999

CRAMP, a 37-amino acid cationic antimicrobial peptide was recently deduced from the cDNA cloned from mouse femoral marrow RNA. In order to investigate the structure-activity relationship and functional region of CRAMP, CRAMP and its 18-mer overlapping peptides were synthesized by the solid phase method. CRAMP showed broad spectrum antibacterial activity against both Gram-positive and Gram-negative bacterial strains (MIC: 3.125-6.25 μM) but had no hemolytic activity until 50 μM. CRAMP was found to have a potent anticancer activity (IC50: 12-23 μM) against two human small cell lung cancer cell lines. Furthermore, CRAMP was found to display faster bactericidal rate in B. subtilis rather than E. coli in the kinetics of bacterial killing. Among 18-meric overlapping fragment peptides, only CRAMP (16-33) displayed potent antibacterial activity (MIC: 12.5-50 μM) against several bacteria with no hemolytic activity. Circular dichroism (CD) spectra anal-ysis indicated that CRAMP and its analogues will form the amphipathic α-helical conformation in the cell membranes similar to other antimicrobial peptides, such as cecropins and magainins.