• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.217-218
• /
• 2016

Sheet based waterproofing methods are factory produced and have a advantage or forming uniform waterproofing layer in construction sites, allowing them to become a commonly used material domestically. Particularly in the case of EVA waterproofing sheets, they can be manufacturing using recycled materials and are thus increasing in application due to their eco-friendly factors. However, heating adhesion method has to be used in case of overlapping areas of waterproofing sheets, but not enough studies have been made on the adhesion stability based on different heat adhesion speed. In this paper, EVA sheets have been studied with their overlap area properties following a heat adhesion method in wintertime ambient conditions and have been observed for the changes in the tensile strength based on different head adhesion speed and rates. According to the results, 6~7m/min adhesion speed was shown to have produce the best tensile strength.

• Journal of the Korean housing association
• /
• v.21 no.4
• /
• pp.89-97
• /
• 2010

Digital convergence era has been already started and is rapidly developed. Recently, convergency technology became an essential issue in all industries, and is expected to accelerate. This means that we can experience growth and change of architecture using new technology and approaching method. The AR (Augmented Reality) technology, among these convergence technology, is a kind of virtual reality technology that user can see a scene of real world which is overlapped by virtual world with additional information. It has been used in manufacturing and management in the whole industry fields including medical, mechanical, military field and so on because it can provide higher sense of reality. Thus, in this paper, we suggest the utilization of AR technology for organically connecting the roads, facilities, green area, landscape and others in the layout planning of housing complex. Users can see real world with virtual object by overlap computer graphic on the real world. This method provides users with various information about territoriality and openness. As the result of this study it is expected that this technology will help the layout planning of housing complex to become more reasonable in the aspect of design, time and cost.

• Corrosion Science and Technology
• /
• v.19 no.4
• /
• pp.224-230
• /
• 2020

Stainless steel has excellent corrosion resistance. The drawback is that pitting occurs easily due to the concentration of chloride. In addition, corrosion of socket weld, which is structurally and chemically weaker than the other components of the pipe, occurs rapidly. Since these two phenomena overlap, pinhole leakage occurs frequently in the seawater pipe socket welds made of stainless steel at the power plants. To analyze this specific corrosion, a metallurgical analysis of the stainless steel socket welds, where the actual corrosion occurred during the power plant operation, was performed. The micro-structure and chemical composition of each socket weld were analyzed. In addition, selective corrosion of the specific micro-structure in a mixed dendrite structure comprising γ-austenite (gamma-phase iron) and δ-ferrite (iron at high temperature) was investigated based on the characteristic micro-morphology and chemical composition of the corroded area. Finally, the different corrosion stages and characteristics of socket weld corrosion are summarized.

• Korean Journal of Optics and Photonics
• /
• v.4 no.1
• /
• pp.90-100
• /
• 1993

A computer routine for personal computer(PC/AT class) is developed to analysize the mode characteristics of silica based optical waveguides whose cross sections are of semi circular and other typical shapes. The basic algorithm used in the routine is to convert the wave equation into a matrix equation by expanding the wave function in terms of simple harmonic functions. The matrix elements are a set of overlap integrals of sinusoidal funtions with appropriate weight given by the distribution of refractive index over the waveguide cross section. The eigenvectors and eigenvalues of the matrix is then computed via diagonalization. We explain some practical problems that arises when implementing the algorithm into the routine. By using this routine we analyze the mode characteristics of silica based optical waveguides of semi circular and some other typical cross sections.

• Journal of the Korean Institute of Gas
• /
• v.2 no.2
• /
• pp.12-17
• /
• 1998

The number of fuel gas accidents is increasing in domestic fuel gas facilities as increasing the supply area. To prevent gas accident, the government institutions related to fuel gas industry partly collected and managed the information of physical properties and safety data. Due to the overlap of data between institutions, collecting and managing the safety information was inefficient. The purpose of this research is developing geographic information system which providing the information of quantitative risk assessment, accident prevention plan, and efficient sharing and managing of the system.

• Journal of Welding and Joining
• /
• v.23 no.6
• /
• pp.67-71
• /
• 2005

This paper is concerned with a study on fracture strength of composites in an adhesive single lap joint. The tests were carried out on joint specimens made with hybrid stacked composites consisting of the polyester and bamboo natural fiber layer. The main objective of this work was to evaluate the fracture properties adjacent to adhesive bonded joint of natural fiber reinforced composite specimens. From the results, natural fiber reinforced composites have lower tensile strength than the original polyester. But tensile-shear strength of natural fiber reinforced composites with bamboo layer far from adhesive bond is as high as that of the original polyester adhesive bonded joints. Spew filet at the end of the overlap reduced the stress concentration at the bonded area. Spew fillet and position of bamboo natural fiber layer have a peat effect on the tensile-shear strength of natural fiber reinforced composites including adhesive bonded joints.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2013.10a
• /
• pp.119-123
• /
• 2013

We conduct the research for reducing aeroacoustic noise occurred when a vehicle operates in high speed situation without modifying the structural configuration such as deforming A-pillar's side curvature. We introduce PAU (Pneumatic Auxiliary Unit) which is a sort of air duct using intake air through radiator grill. According to our research, we can reduce overall noise levels around the surface of HSM (Hyundai Simplified Model). When a vehicleruns 100km/s, area-weighted acoustic power level (AWAPL) indicates 33dB without PAU. However with PAU, coverall AWAPL is decreased to 29dB which means we can improvesilentness approximately 12% compared to ordinary case. Moreover we conduct similar implementation to steering situation especially about yawing. In varioussituations, -10, 0, 10 degree of yawing, we observe 10% reduction in the upstream region of HSM but little increase in downstream region. It seems that inlet air overlap turbulent kinetic energy to surrounding flow. Even though downstream region's noise is louder than upstream region, overall AWAPL is still lower than conventional condition. We also apply this scheme to the real vehicle situation, then we get reasonable output which can support our research outputs.

• Bulletin of the Korean Chemical Society
• /
• v.17 no.8
• /
• pp.700-706
• /
• 1996

We present the results of molecular dynamics simulations of monolayers of long-chain alkyl thiol [S(CH2)15CH3] molecules on an air-solid interface using the extended collapsed atom model for the chain-molecule and a gold surface for the solid surface. Several molecular dynamics simulations have been performed on monolayers with areas per molecule ranging from 18.30 to 32.10 Å2/molecule. It is found that there exist three possible transitions: a continuous transition characterized by a change in molecular configuration without change in lattice structure, a sudden transition characterized by the distinct lattice defects and perfect islands, and a third transition characterized by the appearance of a random, liquid-like state. The analysis of probability distributions of the segments shows that the structure of the chain-molecules at the air-solid interface is completely different from that at the air-water interface in the view of the degree of overlap of the probability distributions of the neighbor segments. The calculated diffusion coefficients of the chain-molecules on the monolayers seem to be not directly related to any one of the three transitions. However, the large diffusion of the molecules enhanced by the increment of the area per molecule may induce the second transition.

• Journal of the Korean Solar Energy Society
• /
• v.39 no.4
• /
• pp.25-39
• /
• 2019

Luminescent solar concentrator (LSC), consisting of luminophore included glass or substrate with edge-mounted photovoltaic cell, is semi-transparent, energy harvesting devices. The luminophore absorbs incident solar light and re-emit photons, while the waveguide plate allows re-emitted photons to reach edge or bottom mounted photovoltaic cells with reduced losses. If the area of LSC is much larger than that of photovoltaic cell, this system can effectively concentrate solar light. In order to improve the performance of LSC, new materials and optical structures have been suggested by many research groups. For decreasing re-abosprion losses, it is essential to minimize the overlap between absorption and photoluminescence solar spectrum of luminophoroe. Moreover, the combination of selective top reflector and reflective optical cavity structure significantly boosts the waveguide efficiency in the LSC. As a result of many efforts, commercially available LSCs have been demonstrated and verified in the outdoor. Also, it is expected to generate electricity in buildings by replacing conventional glass to LSCs.

• Current Photovoltaic Research
• /
• v.10 no.3
• /
• pp.73-76
• /
• 2022

BIPV (Building Integrated Photovoltaic) supplemented the minimum area problem required when installing existing solar modules. However, in order to apply it to buildings, research was needed to increase the aesthetics of solar modules and use them as a design. Accordingly, modules with color applied to the entire surface of the photovoltaic module were being developed, but there was a disadvantage of low power. Therefore, by dividing and bonding the cell strips, it was possible to improve the output power by applying a shingled technology in which other divided cells overlap in a busbar region where light couldn't be received. Shingled technology was advantageous for color modules because the front busbar part that degrades aesthetics was removed. In this research, four color shingled solar modules (Green, Yellow, Blue, Gray) were manufactured and power degradation was analyzed by measuring transmittance and reflectance. Gray color had 80.83% transmittance, which was 31.31% higher than Yellow, resulting in a power difference of 4.45 W.