• 한국음향학회지
• /
• 제34권1호
• /
• pp.82-91
• /
• 2015

본 논문에서는 음성 채널을 통해 데이터를 전송하기 위한 데이터 모뎀의 코드북 설계 방법에 대해 기술하였다. 제안한 코드북 설계 방법은 minimax 최적화 기법을 이용하여 탐색 공간에 분포하는 심볼들 중 최대 중첩을 갖는 심볼들의 중첩을 최소화하도록 하는 방법이다. 제안한 방법에 따라 설계된 코드북을 적용한 데이터 전송 시스템을 제시하였으며, 모의 실험과 실제 이동통신망 적용 실험을 통해 제안한 방법의 성능을 평가하였다.

• Journal of Gastric Cancer
• /
• 제19권3호
• /
• pp.344-354
• /
• 2019

Purpose: No standard technique has been established for esophagojejunal anastomosis during laparoscopic total gastrectomy (LTG) for gastric cancer owing to the technical difficulty and high complication rate of this procedure. This study was performed to compare the short-term outcomes of circular and linear stapling methods after LTG. Materials and Methods: A total of 106 patients treated between July 2010 and July 2018 were divided into 2 groups according to the following anastomosis procedures: hemi-double-stapling technique (HDST; circular stapling method; group C, n=77) or overlap method (linear stapling method; group L, n= 29). The clinicopathological features and postoperative outcomes, including complications, were analyzed. Multivariate analysis was performed using a logistic regression model to identify the independent risk factors for anastomotic complications. Results: The incidence of anastomotic complications was significantly higher in group C than in group L (28.0% vs. 6.9%, P=0.031). The incidence of anastomosis leakage did not differ between the groups (6.5% vs. 6.9%, P=1.000). However, anastomosis stricture occurred only in group C (13% vs. 0%, P=0.018). Multivariate analysis showed that the anastomosis type was significantly related to the risk of anastomotic complications (P=0.045). Conclusions: The overlap method was superior to the HDST with respect to anastomotic complications, especially anastomosis stricture.

• 방송공학회논문지
• /
• 제21권4호
• /
• pp.493-505
• /
• 2016

컴퓨터 비전이나 감시영상 시스템에서 유동인구 수 측정은 안전, 스케줄링, 광고효과 측면에서 중요한 과제 중 하나이다. 유동인구 수 측정은 조명변화, 부분적인 폐색, 중첩, 사람검출과 같은 다양한 어려움을 겪고 있다. 가장 큰 문제점은 혼잡한 상황에서 추적되는 객체에 대한 폐색과 중첩이다. 정확한 유동인구 수 측정을 위해 폐색과 중첩은 반드시 해결해야 할 과제이다. 본 논문에서는 기존의 보행자 추적 방법을 개선한 효율적인 유동인구 수 측정 시스템을 제안한다. 기존의 보행자 추적과 달리, 제안된 방법은 평균 필터 추적방법을 적용하여 성능을 향상시킬 수 있음을 보인다. 또한 객체 추적의 성능향상을 위한 프레임 보상, 아웃라이어 제거를 통해서 추적을 개선한다. 그와 동시에 제안된 시스템은 추적된 객체의 다양한 정보를 저장한다. 데이터 셋 S6와 데이터 셋 S7에 대하여 유동인구 수 측정 정확도를 향상시키고 에러율을 줄인다. 또한 제안된 방법은 실시간으로 평균 80fps의 검출을 제공한다.

• Journal of Gastric Cancer
• /
• 제23권3호
• /
• pp.487-498
• /
• 2023

Purpose: Reduced port surgery (RPS) for gastric cancer has been frequently reported in distal gastrectomies but rarely in total gastrectomies. This study aimed to determine the feasibility of 3-port totally laparoscopic total gastrectomy (TLTG) with overlapping esophagojejunal (EJ) anastomosis. Materials and Methods: A total of 81 patients who underwent curative TLTG for gastric cancer (36 and 45 patients with 3-port and 5-port TLTG, respectively) were evaluated. All 3-port TLTG procedures were performed with the same method as 5-port TLTG, including EJ anastomosis with the intracorporeal overlap method using a linear stapler, except for the number of ports and assistants. Short-term outcomes, including the number of lymph nodes (LNs) harvested by station and postoperative complications, were analyzed retrospectively. Results: Clinical characteristics were not significantly different among the groups, except that the 3-port TLTG group was younger and had a lower rate of pulmonary comorbidity. There were no cases of open conversion or additional port placement. All operative details and the number of harvested LNs did not differ between the groups, but the rate of suprapancreatic LN harvest was higher in the 3-port TLTG group. No significant differences were observed in the overall complication rates between the 2 groups. Conclusions: Three-port TLTG with overlapping EJ anastomoses using a linear stapler is a feasible RPS procedure for total gastrectomy to treat gastric cancer.

• 한국레이저가공학회지
• /
• 제18권4호
• /
• pp.17-22
• /
• 2015

In this paper, ablation rate of $Al_2O_3$ ceramics by femtosecond laser fluence is derived with experimental method. The automatic three axis linear stage makes laser optics to move with high spatial resolution. With 10 times objective lens, minimal pattern width of $Al_2O_3$ is measured in the focal plane. Ablated surface area is shown as linear tendency increasing number of machining times with various laser power conditions. Machining times is most sensitive condition to control $Al_2O_3$ pattern width. Also, the linear increment of pattern width with laser power change is investigated. In high machining speed, the ablation volume rate is more linear with fluence because pulse overlap is minimized in this condition. Thermal effect to surrounding medium can be minimized and clean laser process without melting zone is possible in high machining speed. Ablation volume rate decelerates as increasing machining times and multiple machining times should be considered to achieve proper ablation width and depth.

• 대한전기학회논문지
• /
• 제36권7호
• /
• pp.462-469
• /
• 1987

A metal gate MOSFET with source/drain regions self-aligned to gate region is proposed. The proposed MOS transistor is fabricated by utilizing the higher oxidation rate of source/drain regions with high doping concentration when compared with channel region with moderate doping. The thick oxide on the source/drain regions reduces the gate and drain(source) overlap capacitance down to that of a self-aligned polysilicon gate device while allowing the use of a metal gate with much lower resistivity than the more commonly used polycrystalline silicon. A ring oscillator composed of 15 inverter stages has been computer simulated using SPICE. The results of the simulation show good agreement with experimental measurement confirming the fast switching speed of propesed MOSFET.

• 전자공학회논문지D
• /
• 제35D권2호
• /
• pp.40-51
• /
• 1998

Electron transport properties are investigated by Monte Carlo simulation in n-HgCdTe. The material is easily degenerated at low temperature or being slightly doped, and is characterized by small band gap and large nonparabolic factor. The degeneracy is incorporated in the Monte Carlo simulation by taking into account the electron-electron scattering and the pauli exclusion principle. In the conventional method, however, the electron-electron scattering rate was developed under the assumption of parabolic conduction band. A new formulation of the electron-electron scattering rate is develop considering the band nonparabolicity and overlap integral. The electron-electron scattering effects on the electron distribution,impact ionization coefficienty, electron temperature, drift velocity and electron energy are presented.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2015년도 춘계학술발표대회
• /
• pp.947-949
• /
• 2015

본 논문은 기존의 시간적으로 이웃한 프레임 사이의 움직임을 추정 보상하여 새로운 프레임을 생성하는 프레임률 향상 기법 (frame rate up conversion)을 제안한다. 움직임 추정(Motion Estimation)을 통하여 계산된 움직임 벡터를 이용하여 프레임을 생성하며, 생성된 프레임에서 발생되는 구명 (hole)과 중첩 (overlap) 영역을 처리하는 기법을 제안한다. 특히 k-NN 보간법(k-nearest neighbor interpolation)[3]과 중간값을 적응적으로 활용하여 향상된 화질의 영상을 생성한다. 실험 결과를 통하여 제안하는 기술의 우수성을 입증하였다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2015년도 추계학술발표대회
• /
• pp.1520-1522
• /
• 2015

본 논문은 기존의 시간적으로 이웃한 프레임 사이의 움직임을 추정 보상하여 새로운 프레임을 생성하는 프레임률 향상 기법 (frame rate up conversion)을 제안한다. 움직임 추정(Motion Estimation)을 통하여 계산된 움직임 벡터를 이용하여 프레임을 생성하며, 생성된 프레임에서 발생되는 구멍 (hole)과 중첩 (overlap) 영역을 처리하는 기법을 제안한다. 특히 k-NN 보간법(k-nearest neighbor interpolation)[3]과 중간값을 적응적으로 활용하여 향상된 화질의 영상을 생성한다. 실험 결과를 통하여 제안하는 기술의 우수성을 입증하였다.

• 조명전기설비학회논문지
• /
• 제26권4호
• /
• pp.35-40
• /
• 2012

In this study, the ultraviolet (UV) intensity of polymer insulator was measured using the Anti-Reflective (AR) coating lens on the occurrence of corona discharge. The UV intensity was compared before and after the AR coating. Under the 200-260[nm] of UV lens, the reflection rate before AR coating was 7.5~5.5[%] with 85-89[%] of transmission rate. After AR coating, however, the reflection rate decreased to 1.3~1.22[%] with improved transmission (97.4~97.6[%]). Then, the UV intensity by distance was measured in the polymer insulator. According to the measurement, the UV intensity increased 6.5 times at 37.5[%] of Vm/Vbd with 5[m] of distance. As distance increased, the growth rate declined. As high voltage increased, in addition, AR coating was less effective due to the count error caused by the UV sensor pulse signal overlap. Therefore, it appears that it would be more effective to detect corona discharge with 5[m] or less of distance at diagnosis of power facilities by AR coating and UV sensor sensitivity.