• 제목/요약/키워드: Overlap Approach

검색결과 107건 처리시간 0.027초

InGaZnO active layer 두께에 따른 thin-film transistor 전기적인 영향

  • 우창호;김영이;안철현;김동찬;공보현;배영숙;서동규;조형균
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 추계학술대회 논문집
    • /
    • pp.5-5
    • /
    • 2009
  • Thin-film-transistors (TFTs) that can be prepared at low temperatures have attracted much attention because of the great potential for transparent and flexible electronics. One of the mainstreams in this field is the use of organic semiconductors such as pentacene. But device performance of the organic TFTs is still limited due to low field-effect mobility and rapid degradation after exposing to air. Alternative approach is the use of amorphous oxide semiconductors as a channel. Amorphous oxide semiconductors (AOSs) based TFTs showed the fast technological development, because AOS films can be fabricated at room temperature and exhibit the possibility in application like flexible display, electronic paper, and larges solar cells. Among the various AOSs, a-IGZO has lots of advantages because it has high channel mobility, uniform surface roughness and good transparency. [1] The high mobility is attributed to the overlap of spherical s-orbital of the heavy post-transition metal cations. This study demonstrated the effect of the variation in channel thickness from 30nm to 200nm on the TFT device performance. When the thickness was increased, turn-on voltage and subthreshold swing was decreased. The a-IGZO channels and source/drain metals were deposited with shadow mask. The a-IGZO channel layer was deposited on $SiO_2$/p-Si substrates by RF magnetron sputtering, where RF power is 150W. And working pressure is 3m Torr, at $O_2/Ar$ (2/28 sccm) atmosphere. The electrodes were formed with electron-beam evaporated Ti (30 nm) and Au (70 nm) bilayer. Finally, Al (150nm) as a gate metal was thermal-evaporated. TFT devices were heat-treated in a furnace at 250 $^{\circ}C$ and nitrogen atmosphere for 1hour. The electrical properties of the TFTs were measured using a probe-station. The TFT with channel thickness of 150nm exhibits a good subthreshold swing (SS) of 0.72 V/decade and on-off ratio of $1{\times}10^8$. The field effect mobility and threshold voltage were evaluated as 7.2 and 8 V, respectively.

  • PDF

Effects of thickness of GIZO active layer on device performance in oxide thin-film-transistors

  • Woo, C.H.;Jang, G.J.;Kim, Y.H.;Kong, B.H.;Cho, H.K.
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2009년도 하계학술대회 논문집
    • /
    • pp.137-137
    • /
    • 2009
  • Thin-film transistors (TFTs) that can be prepared at low temperatures have attracted much attention due to the great potential for flexible electronics. One of the mainstreams in this field is the use of organic semiconductors such as pentacene. But device performance of the organic TFTs is still limited by low field effect mobility or rapidly degraded after exposing to air in many cases. Another approach is amorphous oxide semiconductors. Amorphous oxide semiconductors (AOSs) have exactly attracted considerable attention because AOSs were fabricated at room temperature and used lots of application such as flexible display, electronic paper, large solar cells. Among the various AOSs, a-IGZO was considerable material because it has high mobility and uniform surface and good transparent. The high mobility is attributed to the result of the overlap of spherical s-orbital of the heavy pest-transition metal cations. This study is demonstrated the effect of thickness channel layer from 30nm to 200nm. when the thickness was increased, turn on voltage and subthreshold swing were decreased. a-IGZO TFTs have used a shadow mask to deposit channel and source/drain(S/D). a-IGZO were deposited on SiO2 wafer by rf magnetron sputtering. using power is 150W, working pressure is 3m Torr, and an O2/Ar(2/28 SCCM) atmosphere at room temperature. The electrodes were formed with Electron-beam evaporated Ti(30nm) and Au(70nm) structure. Finally, Al(150nm) as a gate metal was evaporated. TFT devices were heat treated in a furnace at $250^{\circ}C$ in nitrogen atmosphere for an hour. The electrical properties of the TFTs were measured using a probe-station to measure I-V characteristic. TFT whose thickness was 150nm exhibits a good subthreshold swing(S) of 0.72 V/decade and high on-off ratio of 1E+08. Field effect mobility, saturation effect mobility, and threshold voltage were evaluated 7.2, 5.8, 8V respectively.

  • PDF

이중 랜드마크 인식 기반 AGV 이동 제어 (A Moving Control of an Automatic Guided Vehicle Based on the Recognition of Double Landmarks)

  • 전혜경;홍윤식
    • 한국통신학회논문지
    • /
    • 제37권8C호
    • /
    • pp.721-730
    • /
    • 2012
  • 본 논문에서는 화장장이란 특수한 실내 공간에서 시신을 최종 목적지인 화장로까지 안전하게 운구할 수 있는 무인이송차량(AGV)의 이동 제어 문제를 다루고자 한다. 바닥에 유도라인을 매립하는 방식은 화장장 환경에 적합하지 않기 때문에, 적외선 센서 기반 AGV 이동 궤적 제어 방식을 제안한다. 이 방식은 AGV가 근적외선을 방사하여 미리 부착된 랜드마크(landmark) 판독을 통해 해당 경로를 따라 주행하게 된다. 이러한 방식이 갖는 문제점은 랜드마크 배열 과정에서 사각 지역(dead zone) 및 중첩 지역(overlap zone)이 존재할 수 있다는 점이다. 이를 해결하기 위해 이중 랜드마크 인식을 통해 센싱 과정에서의 오차 발생 과정을 최소화할 것이다. 또한, 화장로에 진입하기 위한 회전 구간에서는 회전 직후 화장로의 진입로와 일직선을 유지하도록 AGV 안쪽 바퀴와 바깥쪽 바퀴의 가속도 제어를 위한 알고리즘을 제안할 것이다. 본 논문에서 제안한 방식은 모의 차량에 적용하여 그 타당성을 검증하였다. 실제 국내 화장장에 본 논문에서 개발한 AGV 시스템을 적용하여 오차 범위 내에서 동작함을 확인하였다.

서해 해상풍력단지 조성 예정해역의 대형저서동물 군집 생체량에 대한 생태학적 평가 (Ecological Evaluation on the Biomass of Macrobenthic Communities Observed from a Planned Offshore Wind Farm Area, West Coast of Korea)

  • 정수영;이채린;김성현;김성태;명정구;오승용;박진우;진승주;유재원
    • Ocean and Polar Research
    • /
    • 제41권4호
    • /
    • pp.311-318
    • /
    • 2019
  • We analyzed the preliminary survey data (2014-2016) of macrobenthic community biomass (n = 112) from the wind farm area located in the southern part of the west coast of Korea and compared this data with data from the entire west coast (n = 369; 2006-2008). Modal classes from frequency distributions were 6 times higher in the latter (5 vs. 32 g/㎡). The mean and median values of the latter were 1.3 and 1.7 times higher (mean, 20.7 vs. 27.8 g/㎡; median, 17.1 vs. 29.5 g/㎡), and the maximum value was 3.4 times higher. Mood's median test showed significant difference at p-value = 0.01. We estimated the biomass-to-depth relationships from each data set by using Akaike Information Criterion and regarded the non-overlap of the 95% confidence intervals as indicating significant difference. The biomass was different from a 10 m depth below, and 3 times higher in the west coast at around 20 m compared with the maximum depth of the wind farm area. A local event of catastrophic sedimentation ranging from 1 to 2 m was observed in the wind farm during winter surveys. This could be a probable source of the lower biomass, but information on biomass seasonality and a natural experimental approach seem to be needed for the conduct of further studies. This study is meaningful in that it provided the background to assess future changes by understanding the lower level of benthic productivity in the area. We expect this study will contribute to the preparation of measures that can remove or mitigate the source of the lower biomass and improve the productivity of fishery resources in the area.

현대패션에 표현된 하이브리드 경향 연구 - 1990년대 후반을 중심으로 - (A Study on Hybrid Expressed in Modern Fashion - Focusing on the End of 1990s -)

  • 임영자;한윤숙
    • 복식
    • /
    • 제51권5호
    • /
    • pp.113-134
    • /
    • 2001
  • This study was carried out with an objective to prepare the framework of conformity for the 21st century modern fashion, which is interactive with mankind, based on a position that the 21st century contemporary fashion with its amalgamating trend of diversified artistic forms may not be elucidated on a standpoint centering on one certain modality. The hybrid fashion trend of historical modality which provides freedom and satisfaction in creation of an individuals expressive power in expressing true desire of mans inside through man-centered thought of the times has made multifarious motives of the past and present fragmentary. It thus extracts inner divisions and the concept of consolidation through three-dimensional form. Modern fashion is newly interpreted by the material and details of high technologies. and is harmonized by mix and match with various expressions. By having it, it is being expressed together with many types of dresses and ornaments. Modern fashion is being expressed together with many types of dresses and ornaments by new interpretations with the material and details of high technologies and by being harmonized with mix and match with various expressions. The hybrid fashion design trend of regional elements formed by stimuli and contacts of diverse local culture by globalization of network that was achieved by scientific technologies of the contemporary information society has disintegrated varied boundaries in the conventional culture by the latest communication technology-new media on the basis of newly created culture. The fact that regional elements could be expressed as if they were interrelated without each being deprived of originality may be explained with an interpretation on pluralism. The hybrid fashion design trend of cultural aspect, which manifests in the background of scientific technological culture as it transcends the societal-cultural boundaries based on the de-centralization theory of Frederic Jameson, has supplemented the imperfect meanings through conversional correlation with other forms and internal program changes. The middle stratal and polyhedral characteristics are seen as each cultural element is dismantled and reassembled by application of 'multiple-time point expression'. Design forming method is not to bring destruction from outside, but to embrace instability and chaos through radical dismantling of the inside. and to pursue diversity and openness. Thus. it is implemented by an approach that takes the role of design process. In communication of discontinuity, continuity was dismantled through forms of mixing, overlap, perversion, insertion and coincidence.

  • PDF

상호작용과정에서 고객참여의 관계적 역할 (The Relational Role of Customer Participation in Interaction Process)

  • 안진우;오형준
    • 경영과정보연구
    • /
    • 제39권3호
    • /
    • pp.37-51
    • /
    • 2020
  • 서비스접점에서의 고객참여는 상호작용과정에서 중요한 역할을 하고 있다. 뿐만 아니라, 고객참여는 고객-서비스제공자 간의 관계발전에도 영향을 미치고 있다. 지난 선행연구들은 단편적이고 횡단적인 접근을 통해 고객참여의 역할을 밝히고 있지만, 관계의 역동성을 고려한다면, 장기적 관점에서 고객참여의 역할을 규명할 필요가 있다. 또한, 고객참여의 선행변수와 후행변수가 겹치는 문제에 대해서도 그 원인을 규명할 필요가 있다. 본 연구는 관계적 변수의 핵심인 신뢰와 몰입을 중심으로 종단적 관점에서 고객참여가 어떻게 관계발전에 영향을 미치는지를 밝힘으로써 고객참여의 관계적 역할을 확인하고자 한다. 이에 종단적 자료를 통해 고객참여의 관계적 역할을 회귀분석을 통해 분석하고자 한다. 연구의 결과, 신뢰(t1)와 몰입(t1) 중 몰입이 고객참여에 직접적으로 긍정적인 영향을 미치는 것으로 나타났다. 그러나, 신뢰(t1)는 개인적 상호작용 및 책임 있는 행동과 같은 고객참여의 하위차원에 직접적으로긍정적인 영향을 미치는 것으로 나타났다. 이러한 신뢰와 몰입의 영향을 받은 고객참여(t2)는 다시 신뢰(t3)와 몰입(t3)에 긍정적인 영향을 미치는 것으로 나타났다. 결론적으로, 고객참여는 관계적 변수들에 의해 영향을 받지만, 상호작용과정을 통해 다시 관계적 변수들을 향상시킬 수 있는 주요한 요인임을 알 수 있다. 서비스기업은 고객의 정보교환 및 상호작용 욕구를 이끌어 내고 이를 활용함으로써 고객과의 관계발전을 모색할 수 있다.

서양의 전통도배에 관한 이론적 고찰 (A theoretic study about western traditional wallpaper hanging)

  • 임선양
    • 디자인학연구
    • /
    • 제19권2호
    • /
    • pp.207-216
    • /
    • 2006
  • 벽지는 본래 종이가 지닌 성질상 실내장식에 있어서 수명이 가장 짧다는 특징이 있지만, 벽면의 시각적인 효과의 다양함으로 현대 벽장식 마감재중 가장 중요한 요소가 되었다 벽지는 종이의 특성상 역사적 유물 보존이 어렵고 그에 관한 기록이 미흡하며 건축물의 실내공간이 잘 유지되었거나, 광고로 사용되었던 다양한 상업용 샘플과 여러 책자에 의해서만 고증되고 있다. 종이벽지와 도배 자료들을 근거로 18세기의 영국을 중심으로 현대 벽지도배의 발전과 벽지산업의 이론적 체계 확립을 위해 과거의 전통적 벽지도배의 역사적 배경연구와 기술적, 상업적 배경의 근원을 이론적으로 고찰하여 전통적 벽지도배의 상업적 역사성을 재 인식하고자한다. 벽지도배의 이론적 연구를 통해 전통적 도배방법과 초배지의 전승, 반복이음 방식을 이용한 패턴의 양식화, 벽지도배의 분업화와 상업적 비용의 세분화, 과거 전통접착 방법의 전승, 띠벽지의 유래, 전통적 종이벽지의 실용성과 초기 도배기술의 다양한 기능성, 맞대이음 방식에서 중복이음 방식의 변화, 여성의 벽지선택을 통한 DIY제품의 개발 등을 이론적으로 고찰하였다. 벽지는 지금도 장식적, 기능적 벽 마감재 또는 벽 처리를 위한 가장 대중적인 재료로서 다른 재료들보다도 가장 선호하는 제품으로 남아 있다. 이러한 벽지의 도배 기술과 상업성을 역사적으로 고찰하여 전통 벽지도배의 이론적 체계 확립을 위한 중요한 자료이며 미래 벽지산업의 방법론적 접근을 위한 벽지역사의 근원이 될 수 있는 연구라고 사료된다.

  • PDF

Cost Comparison of PWR and PHWR Nuclear Power Plants in Korea

  • Kim, Chang-Hyo;Chung, Chang-Hyun;So, Dong-Sub
    • Nuclear Engineering and Technology
    • /
    • 제11권4호
    • /
    • pp.263-274
    • /
    • 1979
  • 국내도입이 예상되는 900MWe급 가압경수로형 (PWR) 원자력 발전소와 캐나다형가압중수로형 (PHWR-CANDU) 원자력발전소에 대하여 throwaway 핵연료주기를 가상하여 두 노형의 상대적인 경제성을 비교 검토 하였다. 계산을 목적으로 발전단가를 발전소 투자비, 운전보수비, 운전자본비 및 핵연료비로 구분했으며 건설단가는 보완된 ORCOST 전산코드를 그리고 발전단가는 보완된 POWERCO-50 전산코드를 사용하여 구하였다. 계산에 요구되는 각종의 경제인자에 대하여는 단일의 수치값을 갖는 상수보다는 어떤 범위의 수치대를 이루는 통계적인 변수로 처리하였으며 ORCOST 및 POWERCO-50을 통한 무작위 추출법을 통하여 발전소 건설비 및 발전단가의 화율돗수 분포도를 얻었다. 계산결과 두노형간의 발전단가 분포도는 서로 겹치고 있으며 발전 단가의 기대치는 1986년도 미화로 PHWR의 발전단가가 PWR의 발전단가, 39.41mills/kwh보다 약 0.4mill/kwh만큼 적지만 PHWR의 건설기간이 PWR 보다 1년정도 더 걸리게되는 경우 차이가 없음을 알았다. 따라서 두 노형간의 경제성은 거의 우열을 가릴 수 없으며 한국에서 원자력발전소 노형을 선정할 때 기술전수, 국산화 등 경제외적 인자도 경제적 인자로 수량화하여 검토하는 것이 필요하다고 결론을 내렸다.

  • PDF

한강하류지형면의 분류와 지형발달에 대한 연구 (양수리에서 능곡까지)

  • 박노식
    • 동굴
    • /
    • 제68호
    • /
    • pp.23-73
    • /
    • 2005
  • Purpose of study; The purpose of this study is specifically classified as two parts. The one is to attempt the chronological annals of Quaternary topographic surface through the study over the formation process of alluvial surfaces in our country, setting forth the alluvial surfaces lower-parts of Han River area, as the basic deposit, and comparing it to the marginal landform surfaces. The other is to attempt the classification of micro morphology based on the and condition premising the land use as a link for the regional development in the lower-parts of Han river area. Reasons why selected the Lower-parts of Han river area as study objects: 1. The change of river course in this area is very serve both in vertical and horizontal sides. With a situation it is very easy to know about the old geography related to the formation process of topography. 2. The component materials of gravel, sand, silt and clay are deposited in this area. Making it the available data, it is possible to consider about not oかy the formation process of topography but alsoon the development history to some extent. 3. The earthen vessel, a fossil shell fish, bone, cnarcoal and sea-weed are included in the alluvial deposition in this area. These can be also valuable data related to the chronological annals. 4. The bottom set conglometate beds is also included in the alluvial deposits. This can be also valuable data related to the research of geomorphological development. 5. Around of this area the medium landform surface, lower landform surface, pediment and basin, are existed, and these enable the comparison between the erosion surfaces and the alluvial surfaces. Approach : 1. Referring to the change of river beds, I have calculated the vertical and horizontal differences comparing the topographic map published in 1916 with that published in 1966 and through the field work 2. In classifying the landform, I have applied the method of micro morphological classification in accordance with the synthetic index based upon the land conditions, and furthermore used the classification method comparing the topographic map published in 1916 and in that of 1966. 3. I have accorded this classification with the classification by mapping through appliying the method of classification in the development history for the field work making the component materials as the available data. 4. I have used the component materials, which were picked up form the outcrop of 10 places and bored at 5 places, as the available data. 5. I have referred to Hydrological survey data of the ministry of Construction (since 1916) on the overflow of Han-river, and used geologic map of Seoul metropolitan area. Survey Data, and general map published in 1916 by the Japanese Army Survbey Dept., and map published in 1966 by the Construction Research Laboratory and ROK Army Survey Dept., respectively. Conclusion: 1. Classification of Morphology: I have added the historical consideration for development, making the component materials and fossil as the data, to the typical consideration in accordance with the map of summit level, reliefe and slope distribution. In connection with the erosion surface, I have divided into three classification such as high, medium and low-,level landform surfaces which were classified as high and low level landform surfaces in past. furthermore I have divided the low level landform surface two parts, namely upper-parts(200-300m) and bellow-parts(${\pm}100m$). Accordingly, we can recognize the three-parts of erosion surface including the medium level landform surface (500-600m) in this area. (see table 22). In condition with the alluvial surfaces I have classified as two landform surfaces (old and new) which was regarded as one face in past. Meamwhile, under the premise of land use, the synthetic, micro morphological classification based upon the land condition is as per the draw No. 19-1. This is the quite new method of classification which was at first attempted in this country. 2. I have learned that the change of river was most severe at seeing the river meandering rate from Dangjung-ni to Nanjido. As you seee the table and the vertical and horizontal change of river beds is justly proportionable to the river meandering rate. 3. It can be learned at seeing the analysis of component materials of alluvial deposits that the component from each other by areas, however, in the deposits relationship upper stream, and between upper parts and below parts I couldn't always find out the regular ones. 4. Having earthern vessel, shell bone, fossil charcoal and and seaweeds includen in the component materials such as gravel, clay, sand and silt in Dukso and Songpa deposits area. I have become to attempt the compilation of chronicle as yon see in the table 22. 5. In according to hearing of basemen excavation, the bottom set conglomerate beds of Dukso beds of Dukso-beds is 7m and Songpa-beds is 10m. In according to information of dredger it is approx. 20m in the down stream. 6. Making these two beds as the standard beds, I have compared it to other beds. 7 The coarse sand beds which is covering the clay-beds of Dukso-beds and Nanjidobeds is shown the existence of so-called erosion period which formed the gap among the alluvial deposits of stratum. The former has been proved by the sorting, bedding and roundness which was supplied by the main stream and later by the branch stream, respectively. 8. If the clay-beds of Dukeo-bed and Songpa-bed is called as being transgressive overlap, by the Eustatic movement after glacial age, the bottom set conglomerate beds shall be called as being regressive overlap at the holocene. This has the closest relationship with the basin formation movement of Seoul besides the Eustatic movement. 9. The silt-beds which is the main component of deposits of flood plain, is regarded as being deposited at the Holocene in the comb ceramic and plain pottery ages. This has the closest relationship with the change of river course and river beds.

성락원 영벽지의 원형 파악을 위한 3D 스캔기술 연구 (A Study on 3D Scan Technology for Find Archetype of Youngbeokji in Seongnagwon Garden)

  • 이원호;김동현;김재웅;박동진
    • 한국전통조경학회지
    • /
    • 제31권3호
    • /
    • pp.95-105
    • /
    • 2013
  • 본 연구는 성락원(명승 제35호) 영벽지 공간의 원형 파악을 목적으로 주변지형을 포함한 3D 정밀데이터 취득을 통해 연못부 지반의 원형 추정을 한 결과, 다음과 같은 결론을 얻었다. 첫째, 영벽지 석구조물에 대한 용도 및 구조를 살피는 것은 이전의 형태를 밝히는데 단서가 될 것이라 판단되며, 3D 스캔방법의 적용은 주변지형을 포함한 전체적 구조를 살피는데 용이하였다. 둘째, 실측결과, 조사대상 암반부는 남북으로 7,665mm 동서로 7,326mm의 규모를 지니며, 석구조물은 $1,665mm{\times}1,721mm$의 정방형을 이루고, 그 내부에는 지름이1,664mm 반구형이며, 기단 아랫부분에는 암석이 남북 $1,006mm{\times}328mm$규모로 떨어져 나간 흔적이 발견되었다. 셋째, 영벽지 내부의 지형을 기록함에 있어 다중해상도 방식을 사용하여 광대역스캐너를 이용한 스캔작업 후 스캔데이터를 정합하여 Polygon Data로의 변환과정을 거친 후, 이를 정밀스캔데이터와 병합하여 메쉬데이터로 변환하는 과정을 거쳤다. 그리고 해상도 사진과 3차원 지형데이터를 오버랩하여 작성하였다. 넷째, 이 작업의 결과로 석구조물 서측에 회유하는 경사진 암반부 물길이를 확인되었으며, 방지원도형의 석지로 추정되는 수경시설물의 하부구조가 확인되어 암반부에 인공적으로 음각한 것임을 확인하였다. 본 연구를 통해 1960년대 이전의 지형과 상황을 비교연구할 수 있는 토대를 생성하였다. 더불어 입체적 정밀실측데이터의 취득과 함께 발굴 당시의 원형을 디지털상에서 영구보존할 수 있게 되었다. 향후, 이 데이터는 다양한 전문가의 고증을 거쳐 영벽지 석구조물의 용도 및 보존관리방안을 수립할 기초자료로 사용될 것이다. 또한 금번 연구에서 밝혀진 3D 실측의 용이성이 정원연구에 다양하게 활용되어지길 기대한다.