A Study on the Leakage Protection with Polypropylene Mat in Irrigation Canal (Polypropylene Mat에 의(依)한 용수로(用水路)의 누수방지(漏水防止)에 관(關)한 연구(硏究))
-
- Korean Journal of Agricultural Science
- /
- v.6 no.2
- /
- pp.166-184
- /
- 1979
In order to prevent the water loss in the irrigation canal constructed on the sandy gravel layer or on the other highly permeable ground layer, lining has been practiced. Many studies have been done so far on the lining method to prevent the water loss in the irrigation canal and recently studies on the lining with plastic film or polyethylene film were also reported. However, the plastic film or polyethylene film has low strength and is liable to break, and water loss from pin hole caused by contacting with sand or gravel is highly predicted. This study was then conducted to find proper lining and buring method in canal construction of polypropylene mat after coated with vinyl, as one way to overcome the shortcoming frequently observed when plastic or usual polyehtylene film were used. Eventhough rather longer periods of experiments are needed to attain reliable and accurate results on the variation of durability, the durability of asphalt coated area, or on the damage due to freeze after burial or exposure of polypropylene mat, the experiemental results obtained during one year of period are summarized as follows: 1. The curvature at the area between canal bottom and side slope had increased stability and saved consruction cost. The relationship among the variation of curvature, the reduction of polypropylene mat and the reduced amount of soil cutting at each side slope was presented in Fig. 7 through 9. 2. The depth of covering material to protect polypropylene mat was desired to be over 30cm, considering the water depth, side slope, canal cleaning practices, traffic, or back pressure of irrigation period. 3. In order to increase the canal stability and to prevent slope erosion, sandy soil was required, to be placed under ground, and coarse gravel should cover the surface area of canal. 4. The studies on the stability of side slope in the canal should consider the passive area on the bottom and the slope should be about 1 to 2, considering the slope stability, allowable velocity and tractive force. 5. When compared with earth lining, the lining with polypropylene mat coated with vinyl was responsible to save 28% and 37% of canal lining cost, when the soil carrying distances were 500 and 700m. respectively. 6. The water interception was almost completely attained when the polypropylene mat coated with vinyl was used for lining. But further studies were assumed to be necessary for the use of asphalt since the strength of polypropylene mat connected with asphalt will vary with duration.
The supply chain management (SCM) systems have emerged as strong managerial tools for manufacturing firms in enhancing competitive strength. Despite of large investments in the SCM systems, many companies are not fully realizing the promised benefits from the systems. A review of literature on adoption, implementation and success factor of IOS (inter-organization systems), EDI (electronic data interchange) systems, shows that this issue has been examined from multiple theoretic perspectives. And many researchers have attempted to identify the factors which influence the success of system implementation. However, the existing studies have two drawbacks in revealing the determinants of systems implementation success. First, previous researches raise questions as to the appropriateness of research subjects selected. Most SCM systems are operating in the form of private industrial networks, where the participants of the systems consist of two distinct groups: focus companies and vendors. The focus companies are the primary actors in developing and operating the systems, while vendors are passive participants which are connected to the system in order to supply raw materials and parts to the focus companies. Under the circumstance, there are three ways in selecting the research subjects; focus companies only, vendors only, or two parties grouped together. It is hard to find researches that use the focus companies exclusively as the subjects probably due to the insufficient sample size for statistic analysis. Most researches have been conducted using the data collected from both groups. We argue that the SCM success factors cannot be correctly indentified in this case. The focus companies and the vendors are in different positions in many areas regarding the system implementation: firm size, managerial resources, bargaining power, organizational maturity, and etc. There are no obvious reasons to believe that the success factors of the two groups are identical. Grouping the two groups also raises questions on measuring the system success. The benefits from utilizing the systems may not be commonly distributed to the two groups. One group's benefits might be realized at the expenses of the other group considering the situation where vendors participating in SCM systems are under continuous pressures from the focus companies with respect to prices, quality, and delivery time. Therefore, by combining the system outcomes of both groups we cannot measure the system benefits obtained by each group correctly. Second, the measures of system success adopted in the previous researches have shortcoming in measuring the SCM success. User satisfaction, system utilization, and user attitudes toward the systems are most commonly used success measures in the existing studies. These measures have been developed as proxy variables in the studies of decision support systems (DSS) where the contribution of the systems to the organization performance is very difficult to measure. Unlike the DSS, the SCM systems have more specific goals, such as cost saving, inventory reduction, quality improvement, rapid time, and higher customer service. We maintain that more specific measures can be developed instead of proxy variables in order to measure the system benefits correctly. The purpose of this study is to find the determinants of SCM systems success in the perspective of vendor companies. In developing the research model, we have focused on selecting the success factors appropriate for the vendors through reviewing past researches and on developing more accurate success measures. The variables can be classified into following: technological, organizational, and environmental factors on the basis of TOE (Technology-Organization-Environment) framework. The model consists of three independent variables (competition intensity, top management support, and information system maturity), one mediating variable (collaboration), one moderating variable (government support), and a dependent variable (system success). The systems success measures have been developed to reflect the operational benefits of the SCM systems; improvement in planning and analysis capabilities, faster throughput, cost reduction, task integration, and improved product and customer service. The model has been validated using the survey data collected from 122 vendors participating in the SCM systems in Korea. To test for mediation, one should estimate the hierarchical regression analysis on the collaboration. And moderating effect analysis should estimate the moderated multiple regression, examines the effect of the government support. The result shows that information system maturity and top management support are the most important determinants of SCM system success. Supply chain technologies that standardize data formats and enhance information sharing may be adopted by supply chain leader organization because of the influence of focal company in the private industrial networks in order to streamline transactions and improve inter-organization communication. Specially, the need to develop and sustain an information system maturity will provide the focus and purpose to successfully overcome information system obstacles and resistance to innovation diffusion within the supply chain network organization. The support of top management will help focus efforts toward the realization of inter-organizational benefits and lend credibility to functional managers responsible for its implementation. The active involvement, vision, and direction of high level executives provide the impetus needed to sustain the implementation of SCM. The quality of collaboration relationships also is positively related to outcome variable. Collaboration variable is found to have a mediation effect between on influencing factors and implementation success. Higher levels of inter-organizational collaboration behaviors such as shared planning and flexibility in coordinating activities were found to be strongly linked to the vendors trust in the supply chain network. Government support moderates the effect of the IS maturity, competitive intensity, top management support on collaboration and implementation success of SCM. In general, the vendor companies face substantially greater risks in SCM implementation than the larger companies do because of severe constraints on financial and human resources and limited education on SCM systems. Besides resources, Vendors generally lack computer experience and do not have sufficient internal SCM expertise. For these reasons, government supports may establish requirements for firms doing business with the government or provide incentives to adopt, implementation SCM or practices. Government support provides significant improvements in implementation success of SCM when IS maturity, competitive intensity, top management support and collaboration are low. The environmental characteristic of competition intensity has no direct effect on vendor perspective of SCM system success. But, vendors facing above average competition intensity will have a greater need for changing technology. This suggests that companies trying to implement SCM systems should set up compatible supply chain networks and a high-quality collaboration relationship for implementation and performance.
To prepare for the complicated international relationship regarding Korean Peninsula after reunification, this thesis started off with the awareness that Unified Korea should build its international posture and national security at an early stage by determining its appropriate military strength for independent defense and military strategies that Unified Korea should aim. The main theme of this thesis is 'The research on appropriate military strength of the Unified Korean military'. To derive appropriate military strength of Unified Korea, this research focuses on conflict scenario and relative balance strategy based on potential threats posed by neighboring countries, and this is the part that differentiates this research from other researches. First of all, the main objective of the research is to decide appropriate military strength for Unified Korea to secure defense sufficiency. For this, this research will decide efficient military strategy that Unified Korea should aim. Than by presuming the most possible military conflict scenario, this research will judge the most appropriate military strength for Unified Korea to overcome the dispute. Second, after deciding appropriate military strength, this research will suggest how to operate presumed military strength in each armed force. The result of this thesis is as in the following. First, Unified Korea should aim 'relative balance strategy'. 'Relative balance strategy' is a military strategy which Unified Korea can independently secure defense sufficiency by maintaining relative balance when conflicts occur between neighboring countries. This strategy deters conflicts in advance by relative balance of power in certain time and place. Even if conflict occurs inevitably, this strategy secures initiative. Second, when analyzing neighboring countries interest and strategic environment after unification, the possibility of all-out war will be low in the Korean Peninsula because no other nation wants the Korean Peninsula to be subordinated to one single country. Therefore appropriate military strength of the Unified Korean military would be enough when Unified Korea can achieve relative balance in regional war or limited war. Third, Northeast Asia is a region where economic power and military strength is concentrated. Despite increasing mutual cooperation in the region, conflicts and competition to expand each countries influence is inherent. Japan is constantly enhancing their military strength as they aim for normal statehood. China is modernizing their military strength as they aspire to become global central nation. Russia is also enhancing their military strength in order to hold on to their past glory of Soviet Union as a world power. As a result, both in quality and quantity, the gap between military strength of Unified Korea and each neighboring countries is enlarged at an alarming rate. Especially in the field of air-sea power, arms race is occurring between each nation. Therefore Unified Korea should be equipped with appropriate military strength in order to achieve relative balance with each threats posed by neighboring countries. Fourth, the most possible conflicts between Unified Korea and neighboring countries could be summarized into four, which are Dokdo territorial dispute with Japan, Leodo jurisdictional dispute with China, territorial dispute concerning northern part of the Korea Peninsula with China and disputes regarding marine resources and sea routes with Russia. Based on those conflict scenarios, appropriate military strength for Unified Korea is as in the following. When conflict occurs with Japan regarding Dokdo, Japan is expected to put JMSDF Escort Flotilla 3, one out of four of its Japan Maritime Self-Defense Force Escort Fleet, which is based in Maizuru and JMSDF Maizuru District. To counterbalance this military strength, Unified Korea needs one task fleet, comprised with three task flotilla. In case of jurisdictional conflict with China concerning Leodo, China is expected to dispatch its North Sea fleet, one out of three of its naval fleet, which is in charge of the Yellow Sea. To response to this military action, Unified Korea needs one task fleet, comprised with three task flotilla. In case of territorial dispute concerning northern part of the Korean Peninsula with China, it is estimated that out of seven Military Region troops, China will dispatch two Military Region troops, including three Army Groups from Shenyang Military Region, where it faces boarder with the Korean Peninsula. To handle with this military strength, Unified Korea needs six corps size ground force strength, including three corps of ground forces, two operational reserve corps(maneuver corps), and one strategic reserve corps(maneuver corps). When conflict occurs with Russia regarding marine resources and sea routes, Russia is expected to send a warfare group of a size that includes two destroyers, which is part of the Pacific Fleet. In order to balance this strength, Unified Korea naval power requires one warfare group including two destroyers. Fifth, management direction for the Unified Korean military is as in the following. Regarding the ground force management, it would be most efficient to deploy troops in the border area with china for regional and counter-amphibious defense. For the defense except the border line with china, the most efficient form of force management would be maintaining strategic reserve corps. The naval force should achieve relative balance with neighboring countries when there is maritime dispute and build 'task fleet' which can independently handle long-range maritime mission. Of the three 'task fleet', one task fleet should be deployed at Jeju base to prepare for Dokdo territorial dispute and Leodo jurisdictional dispute. Also in case of regional conflict with china, one task fleet should be positioned at Yellow Sea and for regional conflict with Japan and Russia, one task fleet should be deployed at East Sea. Realistically, Unified Korea cannot possess an air force equal to neither Japan nor China in quantity. Therefore, although Unified Korea's air force might be inferior in quantity, they should possess the systematic level which Japan or China has. For this Unified Korea should build air base in island areas like Jeju Island or Ullenong Island to increase combat radius. Also to block off infiltration of enemy attack plane, air force needs to build and manage air bases near coastal areas. For landing operation forces, Marine Corps should be managed in the size of two divisions. For island defense force, which is in charge of Jeju Island, Ulleung Island, Dokdo Island and five northwestern boarder island defenses, it should be in the size of one brigade. Also for standing international peace keeping operation, it requires one brigade. Therefore Marine Corps should be organized into three divisions. The result of the research yields a few policy implications when building appropriate military strength for Unified Korea. First, Unified Korea requires lower number of ground troops compared to that of current ROK(Republic of Korea) force. Second, air-sea forces should be drastically reinforced. Third, appropriate military strength of the Unified Korean military should be based on current ROK military system. Forth, building appropriate military strength for Unified Korea should start from today, not after reunification. Because of this, South Korea should build a military power that can simultaneously prepare for current North Korea's provocations and future threats from neighboring countries after reunification. The core of this research is to decide appropriate military strength for Unified Korea to realize relative balance that will ensure defense sufficiency from neighboring countries threats. In other words, this research should precisely be aware of threats posed by neighboring countries and decide minimum level of military strength that could realize relative balance in conflict situation. Moreover this research will show the path for building appropriate military strength in each armed force.
In this study, the early suicide prevention program was applied to the elementary school students and compared the prior & post effect of the program, and verified the status of psychology change like emotional status, or temptation to take a suicide, and presented the possibility as a suicide prevention program. The period of adolescence is the very unstable period in the process of growth being cognitively immature, emotionally impulsive period. It is the period emotionally unstable and unpredictable possible to select the method of suicide as an extreme method to escape the reality, or impulsive problem solving against small conflict or dispute situation. Many stress of the student such as recent nuclear family, expectation of parents to their children, education problem, socio-environmental elements, individual psychological factor lead students to the extreme activity of suicide in recent days. In this study, the scope of stress experienced in the elementary school as well as idea and degree of temptation regarding suicide by the suicide prevention program were identified, and through prevention program such as meditation training, breath training and through experience of anger control, emotion-expression, self overcome and establish positive self-identity and make understanding Self-control, Self-esteem & preciousness of life based on which the effect to suicide prevention was analyzed. The study was made targeting 51 students of 2 classes of 6th grade of elementary school of Goyang-si and processed 30 minutes every morning focused on through experience & activity of the principle & method of brain science. The data was collected for 20 times before starting morning class by using Suicide Probability Scale(herein SPS-A) designed to predict effectively suicide Probability, suicide risk prediction scale, surveyed by 7 areas such as Positive outlook, Within the family closeness, Impulsivity, Interpersonal hostility, Hopelessness, Hopelessness syndrome, suicide accident. Analytical methods and validation was used the Wilcoxon's signed rank test using SPSS Program. Though the process of program in short period, but there was a effective and positive results in the 7 areas in the average comparison. But in the t-test result, there was a different outcome. It indicated changes in the 3 questionnaires (No.7, No.14, No.19) out of 31 SPS-A questionnaires, and there was a no change to the rest item. It also indicated more changes of the students in the class A than class B. And in case of the class A students, psychological changes were verified in the areas of Hopelessness syndrome, suicide accident among 7 areas after the program was processed. Through this study, it could be verified that different results could be derived depending on the Student tendency, program professional(teacher in charge, processing lecturer). The suicide prevention program presented in this article can be a help in learning and suicide prevention with consistent systematization, activation through emotion and impulse control based on emotional stress relief and positive self-identity recovery, stabilization of brain waves, and let the short period program not to be died out but to be continued connecting from childhood to adolescence capable to make surrounding environment for spiritual, physical healthy growth for which this could be an effective program for suicide prevention of the social problem.
Services using artificial intelligence have begun to emerge in daily life. Artificial intelligence is applied to products in consumer electronics and communications such as artificial intelligence refrigerators and speakers. In the financial sector, using Kensho's artificial intelligence technology, the process of the stock trading system in Goldman Sachs was improved. For example, two stock traders could handle the work of 600 stock traders and the analytical work for 15 people for 4weeks could be processed in 5 minutes. Especially, big data analysis through machine learning among artificial intelligence fields is actively applied throughout the financial industry. The stock market analysis and investment modeling through machine learning theory are also actively studied. The limits of linearity problem existing in financial time series studies are overcome by using machine learning theory such as artificial intelligence prediction model. The study of quantitative financial data based on the past stock market-related numerical data is widely performed using artificial intelligence to forecast future movements of stock price or indices. Various other studies have been conducted to predict the future direction of the market or the stock price of companies by learning based on a large amount of text data such as various news and comments related to the stock market. Investing on commodity asset, one of alternative assets, is usually used for enhancing the stability and safety of traditional stock and bond asset portfolio. There are relatively few researches on the investment model about commodity asset than mainstream assets like equity and bond. Recently machine learning techniques are widely applied on financial world, especially on stock and bond investment model and it makes better trading model on this field and makes the change on the whole financial area. In this study we made investment model using Support Vector Machine among the machine learning models. There are some researches on commodity asset focusing on the price prediction of the specific commodity but it is hard to find the researches about investment model of commodity as asset allocation using machine learning model. We propose a method of forecasting four major commodity indices, portfolio made of commodity futures, and individual commodity futures, using SVM model. The four major commodity indices are Goldman Sachs Commodity Index(GSCI), Dow Jones UBS Commodity Index(DJUI), Thomson Reuters/Core Commodity CRB Index(TRCI), and Rogers International Commodity Index(RI). We selected each two individual futures among three sectors as energy, agriculture, and metals that are actively traded on CME market and have enough liquidity. They are Crude Oil, Natural Gas, Corn, Wheat, Gold and Silver Futures. We made the equally weighted portfolio with six commodity futures for comparing with other commodity indices. We set the 19 macroeconomic indicators including stock market indices, exports & imports trade data, labor market data, and composite leading indicators as the input data of the model because commodity asset is very closely related with the macroeconomic activities. They are 14 US economic indicators, two Chinese economic indicators and two Korean economic indicators. Data period is from January 1990 to May 2017. We set the former 195 monthly data as training data and the latter 125 monthly data as test data. In this study, we verified that the performance of the equally weighted commodity futures portfolio rebalanced by the SVM model is better than that of other commodity indices. The prediction accuracy of the model for the commodity indices does not exceed 50% regardless of the SVM kernel function. On the other hand, the prediction accuracy of equally weighted commodity futures portfolio is 53%. The prediction accuracy of the individual commodity futures model is better than that of commodity indices model especially in agriculture and metal sectors. The individual commodity futures portfolio excluding the energy sector has outperformed the three sectors covered by individual commodity futures portfolio. In order to verify the validity of the model, it is judged that the analysis results should be similar despite variations in data period. So we also examined the odd numbered year data as training data and the even numbered year data as test data and we confirmed that the analysis results are similar. As a result, when we allocate commodity assets to traditional portfolio composed of stock, bond, and cash, we can get more effective investment performance not by investing commodity indices but by investing commodity futures. Especially we can get better performance by rebalanced commodity futures portfolio designed by SVM model.
Corporate credit rating assessment consists of complicated processes in which various factors describing a company are taken into consideration. Such assessment is known to be very expensive since domain experts should be employed to assess the ratings. As a result, the data-driven corporate credit rating prediction using statistical and artificial intelligence (AI) techniques has received considerable attention from researchers and practitioners. In particular, statistical methods such as multiple discriminant analysis (MDA) and multinomial logistic regression analysis (MLOGIT), and AI methods including case-based reasoning (CBR), artificial neural network (ANN), and multiclass support vector machine (MSVM) have been applied to corporate credit rating.2) Among them, MSVM has recently become popular because of its robustness and high prediction accuracy. In this study, we propose a novel optimized MSVM model, and appy it to corporate credit rating prediction in order to enhance the accuracy. Our model, named 'GAMSVM (Genetic Algorithm-optimized Multiclass Support Vector Machine),' is designed to simultaneously optimize the kernel parameters and the feature subset selection. Prior studies like Lorena and de Carvalho (2008), and Chatterjee (2013) show that proper kernel parameters may improve the performance of MSVMs. Also, the results from the studies such as Shieh and Yang (2008) and Chatterjee (2013) imply that appropriate feature selection may lead to higher prediction accuracy. Based on these prior studies, we propose to apply GAMSVM to corporate credit rating prediction. As a tool for optimizing the kernel parameters and the feature subset selection, we suggest genetic algorithm (GA). GA is known as an efficient and effective search method that attempts to simulate the biological evolution phenomenon. By applying genetic operations such as selection, crossover, and mutation, it is designed to gradually improve the search results. Especially, mutation operator prevents GA from falling into the local optima, thus we can find the globally optimal or near-optimal solution using it. GA has popularly been applied to search optimal parameters or feature subset selections of AI techniques including MSVM. With these reasons, we also adopt GA as an optimization tool. To empirically validate the usefulness of GAMSVM, we applied it to a real-world case of credit rating in Korea. Our application is in bond rating, which is the most frequently studied area of credit rating for specific debt issues or other financial obligations. The experimental dataset was collected from a large credit rating company in South Korea. It contained 39 financial ratios of 1,295 companies in the manufacturing industry, and their credit ratings. Using various statistical methods including the one-way ANOVA and the stepwise MDA, we selected 14 financial ratios as the candidate independent variables. The dependent variable, i.e. credit rating, was labeled as four classes: 1(A1); 2(A2); 3(A3); 4(B and C). 80 percent of total data for each class was used for training, and remaining 20 percent was used for validation. And, to overcome small sample size, we applied five-fold cross validation to our dataset. In order to examine the competitiveness of the proposed model, we also experimented several comparative models including MDA, MLOGIT, CBR, ANN and MSVM. In case of MSVM, we adopted One-Against-One (OAO) and DAGSVM (Directed Acyclic Graph SVM) approaches because they are known to be the most accurate approaches among various MSVM approaches. GAMSVM was implemented using LIBSVM-an open-source software, and Evolver 5.5-a commercial software enables GA. Other comparative models were experimented using various statistical and AI packages such as SPSS for Windows, Neuroshell, and Microsoft Excel VBA (Visual Basic for Applications). Experimental results showed that the proposed model-GAMSVM-outperformed all the competitive models. In addition, the model was found to use less independent variables, but to show higher accuracy. In our experiments, five variables such as X7 (total debt), X9 (sales per employee), X13 (years after founded), X15 (accumulated earning to total asset), and X39 (the index related to the cash flows from operating activity) were found to be the most important factors in predicting the corporate credit ratings. However, the values of the finally selected kernel parameters were found to be almost same among the data subsets. To examine whether the predictive performance of GAMSVM was significantly greater than those of other models, we used the McNemar test. As a result, we found that GAMSVM was better than MDA, MLOGIT, CBR, and ANN at the 1% significance level, and better than OAO and DAGSVM at the 5% significance level.
Food service is the major part of franchise business in Korea, accounting for 69.9% of the brands in the market. As the food service industry becomes mature, many franchisees have struggled to survive in the market. In general, consumers have higher levels of expectation toward service quality of franchised outlets compared that of (non-franchised) independent ones. They also tend to believe that franchisees deliver standardized service at the uniform food price, regardless of their locations. Such beliefs seem to be important reasons that consumers prefer franchised outlets to independent ones. Nevertheless, few studies examined the impact of qualify features of franchisees on customer satisfaction so far. To this end, this study examined the characteristics of various quality features of franchisees in the food service industry, regarding their relationship with customer satisfaction and dissatisfaction. The quality perception of heavy-users was also compared with that of light-users in order to find insights for developing differentiated marketing strategy for the two segments. Customer satisfaction has been understood as a one-dimensional construct while there are recent studies that insist two-dimensional nature of the construct. In this regard, Kano et al. (1984) suggested to categorize quality features of a product or service into five types, based on their relation to customer satisfaction and dissatisfaction: Must-be quality, Attractive quality, One-dimensional quality, Indifferent quality, and Reverse quality. According to the Kano model, customers are more dissatisfied when Must-be quality(M) are not fulfilled, but their satisfaction does not arise above neutral no matter how fully the quality fulfilled. In comparison, customers are more satisfied with a full provision of Attactive quality(A) but manage to accept its dysfunction. One-dimensional quality(O) results in satisfaction when fulfilled and dissatisfaction when not fulfilled. For Indifferent quality(I), its presence or absence influences neither customer satisfaction nor dissatisfaction. Lastly, Reverse quality(R) refers to the features whose high degree of achievement results in customer dissatisfaction rather than satisfaction. Meanwhile, the basic guidelines of the Kano model have a limitation in that the quality type of each feature is simply determined by calculating the mode statistics. In order to overcome such limitation, the relative importance of each feature on customer satisfaction (Better value; b) and dissatisfaction (Worse value; w) were calculated following the formulas below (Timko, 1993). The Better value indicates how much customer satisfaction is increased by providing the quality feature in question. In contrast, the Worse value indicates how much customer dissatisfaction is decreased by providing the quality feature. Better = (A + O)/(A+O+M+I) Worse = (O+M)/(A+O+M+I)(-1) An on-line survey was performed in order to understand the nature of quality features of franchisees in the food service industry by applying the Kano Model. A total of twenty quality features (refer to the Table 2) were identified as the result of literature review in franchise business and a pre-test with fifty college students in Seoul. The potential respondents of our main survey was limited to the customers who have visited more than two restaurants/stores of the same franchise brand. Survey invitation e-mails were sent out to the panels of a market research company and a total of 257 responses were used for analysis. Following the guidelines of Kano model, each of the twenty quality features was classified into one of the five types based on customers' responses to a set of questions: "(1) how do you feel if the following quality feature is fulfilled in the franchise restaurant that you visit," and "(2) how do you feel if the following quality feature is not fulfilled in the franchise restaurant that you visit." The analyses revealed that customers' dissatisfaction with franchisees is commonly associated with the poor level of cleanliness of the store (w=-0.872), kindness of the staffs(w=-0.890), conveniences such as parking lot and restroom(w=-0.669), and expertise of the staffs(w=-0.492). Such quality features were categorized as Must-be quality in this study. While standardization or uniformity across franchisees has been emphasized in franchise business, this study found that consumers are interested only in uniformity of price across franchisees(w=-0.608), but not interested in standardizations of menu items, interior designs, customer service procedures, and food tastes. Customers appeared to be more satisfied when the franchise brand has promotional events such as giveaways(b=0.767), good accessibility(b=0.699), customer loyalty programs(b=0.659), award winning history(b=0.641), and outlets in the overseas market(b=0.506). The results are summarized in a matrix form in Table 1. Better(b) and Worse(w) index indicate relative importance of each quality feature on customer satisfaction and dissatisfaction, respectively. Meanwhile, there were differences in perceiving the quality features between light users and heavy users of any specific franchise brand in the food service industry. Expertise of the staffs was labeled as Must-be quality for heavy users but Indifferent quality for light users. Light users seemed indifferent to overseas expansion of the brand and offering new menu items on a regular basis, while heavy users appeared to perceive them as Attractive quality. Such difference may come from their different levels of involvement when they eat out. The results are shown in Table 2. The findings of this study help practitioners understand the quality features they need to focus on to strengthen the competitive power in the food service market. Above all, removing the factors that cause customer dissatisfaction seems to be the most critical for franchisees. To retain loyal customers of the franchise brand, it is also recommended for franchisor to invest resources in the development of new menu items as well as training programs for the staffs. Lastly, if resources allow, promotional events, loyalty programs, overseas expansion, award-winning history can be considered as tools for attracting more customers to the business.
The anthropomorphism of brands, defined as seeing human beings in brands (Puzakova, Kwak, and Rosereto, 2008) is the focus of this study. Specifically, the research objective is to understand the ways in which brands are rendered humanlike. By analyzing consumer readings of stories found on food product packages we intend to show how marketers and consumers humanize a spectrum of brands and create meanings. Our research question considers the possibility that a single brand may host multiple or single meanings, associations, and personalities for different consumers. We start by highlighting the theoretical and practical significance of our research, explain why we turn our attention to packages as vehicles of brand meaning transfer, then describe our qualitative methodology, discuss findings, and conclude with a discussion of managerial implications and directions for future studies. The study was designed to directly expose consumers to potential vehicles of brand meaning transfer and then engage these consumers in free verbal reflections on their perceived meanings. Specifically, we asked participants to read non-nutritional stories on selected branded food packages, in order to elicit data about received meanings. Packaging has yet to receive due attention in consumer research (Hine, 1995). Until now, attention has focused solely on its utilitarian function and has generated a body of research that has explored the impact of nutritional information and claims on consumer perceptions of products (e.g., Loureiro, McCluskey and Mittelhammer, 2002; Mazis and Raymond, 1997; Nayga, Lipinski and Savur, 1998; Wansik, 2003). An exception is a recent study that turns its attention to non-nutritional packaging narratives and treats them as cultural productions and vehicles for mythologizing the brand (Kniazeva and Belk, 2007). The next step in this stream of research is to explore how such mythologizing activity affects brand personality perception and how these perceptions relate to consumers. These are the questions that our study aimed to address. We used in-depth interviews to help overcome the limitations of quantitative studies. Our convenience sample was formed with the objective of providing demographic and psychographic diversity in order to elicit variations in consumer reflections to food packaging stories. Our informants represent middle-class residents of the US and do not exhibit extreme alternative lifestyles described by Thompson as "cultural creatives" (2004). Nine people were individually interviewed on their food consumption preferences and behavior. Participants were asked to have a look at the twelve displayed food product packages and read all the textual information on the package, after which we continued with questions that focused on the consumer interpretations of the reading material (Scott and Batra, 2003). On average, each participant reflected on 4-5 packages. Our in-depth interviews lasted one to one and a half hours each. The interviews were tape recorded and transcribed, providing 140 pages of text. The products came from local grocery stores on the West Coast of the US and represented a basic range of food product categories, including snacks, canned foods, cereals, baby foods, and tea. The data were analyzed using procedures for developing grounded theory delineated by Strauss and Corbin (1998). As a result, our study does not support the notion of one brand/one personality as assumed by prior work. Thus, we reveal multiple brand personalities peacefully cohabiting in the same brand as seen by different consumers, despite marketer attempts to create more singular brand personalities. We extend Fournier's (1998) proposition, that one's life projects shape the intensity and nature of brand relationships. We find that these life projects also affect perceived brand personifications and meanings. While Fournier provides a conceptual framework that links together consumers’ life themes (Mick and Buhl, 1992) and relational roles assigned to anthropomorphized brands, we find that consumer life projects mold both the ways in which brands are rendered humanlike and the ways in which brands connect to consumers' existential concerns. We find two modes through which brands are anthropomorphized by our participants. First, brand personalities are created by seeing them through perceived demographic, psychographic, and social characteristics that are to some degree shared by consumers. Second, brands in our study further relate to consumers' existential concerns by either being blended with consumer personalities in order to connect to them (the brand as a friend, a family member, a next door neighbor) or by distancing themselves from the brand personalities and estranging them (the brand as a used car salesman, a "bunch of executives.") By focusing on food product packages, we illuminate a very specific, widely-used, but little-researched vehicle of marketing communication: brand storytelling. Recent work that has approached packages as mythmakers, finds it increasingly challenging for marketers to produce textual stories that link the personalities of products to the personalities of those consuming them, and suggests that "a multiplicity of building material for creating desired consumer myths is what a postmodern consumer arguably needs" (Kniazeva and Belk, 2007). Used as vehicles for storytelling, food packages can exploit both rational and emotional approaches, offering consumers either a "lecture" or "drama" (Randazzo, 2006), myths (Kniazeva and Belk, 2007; Holt, 2004; Thompson, 2004), or meanings (McCracken, 2005) as necessary building blocks for anthropomorphizing their brands. The craft of giving birth to brand personalities is in the hands of writers/marketers and in the minds of readers/consumers who individually and sometimes idiosyncratically put a meaningful human face on a brand.
As the pace of competition dramatically accelerates and the complexity of change grows, a variety of research have been conducted to improve firms' short-term performance and to enhance firms' long-term survival. In particular, researchers and practitioners have paid their attention to identify promising technologies that lead competitive advantage to a firm. Discovery of promising technology depends on how a firm evaluates the value of technologies, thus many evaluating methods have been proposed. Experts' opinion based approaches have been widely accepted to predict the value of technologies. Whereas this approach provides in-depth analysis and ensures validity of analysis results, it is usually cost-and time-ineffective and is limited to qualitative evaluation. Considerable studies attempt to forecast the value of technology by using patent information to overcome the limitation of experts' opinion based approach. Patent based technology evaluation has served as a valuable assessment approach of the technological forecasting because it contains a full and practical description of technology with uniform structure. Furthermore, it provides information that is not divulged in any other sources. Although patent information based approach has contributed to our understanding of prediction of promising technologies, it has some limitations because prediction has been made based on the past patent information, and the interpretations of patent analyses are not consistent. In order to fill this gap, this study proposes a technology forecasting methodology by integrating patent information approach and artificial intelligence method. The methodology consists of three modules : evaluation of technologies promising, implementation of technologies value prediction model, and recommendation of promising technologies. In the first module, technologies promising is evaluated from three different and complementary dimensions; impact, fusion, and diffusion perspectives. The impact of technologies refers to their influence on future technologies development and improvement, and is also clearly associated with their monetary value. The fusion of technologies denotes the extent to which a technology fuses different technologies, and represents the breadth of search underlying the technology. The fusion of technologies can be calculated based on technology or patent, thus this study measures two types of fusion index; fusion index per technology and fusion index per patent. Finally, the diffusion of technologies denotes their degree of applicability across scientific and technological fields. In the same vein, diffusion index per technology and diffusion index per patent are considered respectively. In the second module, technologies value prediction model is implemented using artificial intelligence method. This studies use the values of five indexes (i.e., impact index, fusion index per technology, fusion index per patent, diffusion index per technology and diffusion index per patent) at different time (e.g., t-n, t-n-1, t-n-2,
Background: Anemia in chronic renal failure plays an important role in increasing morbidity of dialysis patients. The causes of the anemia are multifactorial. With using of erythropoietin(EPO) most of uremia-induced anemia can be overcome. However, about 10% of renal failure patients shows EPO-resistant anemia. Hyporesponsiveness to EPO has been related to many factors: iron deficiency, aluminum intoxication, inflammations, malignancies and secondary hyperparathyroidism. So I evaluated the improvement of EPO responsiveness after correction of above several factors. Materials and Methods: Seventy-two patients on hemodialysis over 6 months were treated with intravenous ascorbic acid(IVAA, 300 mg t.i.w. for 12 weeks), After administration of IVAA for 12 weeks, patients were classified into several groups according to iron status, serum aluminum levels and i-PTH levels. Indivisualized treatments were performed: increased iron supplement for absolute iron deficiency, active vitamin D3 for secondary hyperparathyroidism and desferrioxamine(DFO, 5 mg/kg t.i.w.) for aluminum intoxication or hyperferritinemia. Results: 1) Result of IVAA therapy for 12 weeks on all patients(n=72). Hemoglobin levels at 2, 4, 6 week were significantly elevated compared to baseline, but those of hemoglobin at 8, 10, 12 week were not significantly different. 2) Result of IVAA therapy for 20 weeks on patients with 100