• Proceedings of the IEEK Conference
• /
• 2006.06a
• /
• pp.1001-1002
• /
• 2006

As most of the powerline modems use spread spectrum modulation method which has strong immunity against the narrowband fading, or psk modulation method, the amplitude of the signal contains no useful informations. In this paper, we used class D amplifier to implement the drive circuit of the analog front end, and showed that it has great superiority over other existing drive circuits in rapidly impedance changing power line channel.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.2 no.1
• /
• pp.133-140
• /
• 1998

In this paper, RS coded DTMF modulation for reliable data transmission over mobile fading channels is considered. The circuits of (15,9) RS codec are proposed and synthesized, and the performances are evaluated over fading channels. The codec circuits take about 14000 gates standardized by 2-input NAMD gate. The (15,9) RS coded DTMF signalling provides theoretical coding gain more than 20 dB over fading channels for BER 10.6, the criterion for data transmissions in mobile communications such as IMT-2000. Thus, It is very effective to apply RS codec to DTMF signalling for data transmission in mobile communications over fading channels.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.220-220
• /
• 2013

Surface-normal transmission electro-absorption modulator (EAM) are attractive for high-definition (HD) three-dimensional (3D) imaging application due to its features such as small system volume and simple epitaxial structure [1,2]. However, EAM in order to be used for HD 3D imaging system requires uniform modulation performance over large area. To achieve highly uniform modulation performance of EAM at the operating wavelength of 850 nm, it is extremely important to remove the GaAs substrate over large area since GaAs material has high absorption coefficient below 870 nm which corresponds to band-edge energy of GaAs (1.424 eV). In this study, we propose and experimentally demonstrate a transmission EAM in which highly selective backside etching methods which include lapping, dry etching and wet etching is carried out to remove the GaAs substrate for achieving highly uniform modulation performance. First, lapping process on GaAs substrate was carried out for different lapping speeds (5 rpm, 7 rpm, 10 rpm) and the thickness was measured over different areas of surface. For a lapping speed of 5 rpm, a highly uniform surface over a large area ($2{\times}1\;mm^2$) was obtained. Second, optimization of inductive coupled plasma-reactive ion etching (ICP-RIE) was carried out to achieve anisotropy and high etch rate. The dry etching carried out using a gas mixture of SiCl4 and Ar, each having a flow rate of 10 sccm and 40 sccm, respectively with an RF power of 50 W, ICP power of 400 W and chamber pressure of 2 mTorr was the optimum etching condition. Last, the rest of GaAs substrate was successfully removed by highly selective backside wet etching with pH adjusted solution of citric acid and hydrogen peroxide. Citric acid/hydrogen peroxide etching solution having a volume ratio of 5:1 was the best etching condition which provides not only high selectivity of 235:1 between GaAs and AlAs but also good etching profile [3]. The fabricated transmission EAM array have an amplitude modulation of more than 50% at the bias voltage of -9 V and maintains high uniformity of >90% over large area ($2{\times}1\;mm^2$). These results show that the fabricated transmission EAM with substrate removed is an excellent candidate to be used as an optical shutter for HD 3D imaging application.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.32A no.9
• /
• pp.1177-1183
• /
• 1995

This paper proposes a new modulation scheme of $\pi$/4-DQPSK with stepped phase for a frequency selective fading channel. In the proposed modulation scheme, the phase of transmitted signal is shifted in the mid of a symbol duration in order to reduce the effect of multipath delay spread. It reduces the irreducible error of $\pi$/4-DQPSK over a frequency selective fading channel. It is shown that $\pi$/4-DQPSK with stepped phase achieves smaller average bit error probability than regular $\pi$/4- DQPSK by simulation. The former achieves much smaller average bit error probability than the latter for small TEX>${\tau}/T_{s}$.

• Journal of Power Electronics
• /
• v.17 no.5
• /
• pp.1317-1326
• /
• 2017

The cascaded H-bridge (CHB) multilevel converter is a promising topology for large-scale photovoltaic (PV) systems. The output voltage over-modulation derived by the inter-module active power imbalance is one of the key issues for CHB PV systems. This paper proposed a dynamic power distribution strategy to eliminate the over-modulation in a CHB PV system by suitably redistributing the reactive power among the inverter modules of the CHB PV system. The proposed strategy can effectively extend the operating region of the CHB PV system with a simple control algorithm and easy implementation. Simulation and experimental results carried out on a seven-level CHB grid-connected PV system are shown to validate the proposed strategy.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.14 no.2
• /
• pp.98-107
• /
• 2002

The performance of a capacity controlled system, which are tandem, pole change, bypass and inverter driven compressor, has been compared with that of a con- ventional constant speed system. It has been found that capacity modulated system can offer more than 14 percent improvement in SEER over the conventional system. Comparative test results show that two compressor system can attain an improvement in SEER up to 42% over the conventional on/off system, and is feasible without additional investment.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.7
• /
• pp.1033-1043
• /
• 1999

We consider an improved multicarrier(MC) CDMA system that combines both DS-CDMA with a concatenated orthogonal/PN spreading sequence and MC modulation. This system incorporates the advantages of DS-CDMA with a concatenated sequence to achieve large user capacity and MC modulation technique to combat the effects of a multipath fading channel and intersymbol interference(ISI). Considering voice activity and imperfect sectorization, the system performance is analysed for the maximal ratio combiner(MRC) under a multicell, multiuser, and multipath Rayleigh/Rician fading channels. The performance of the system is improved much more for the single path fading channel compared to the multipath fading channel. Also the system is shown to have the more improved average bit error rate(BER) over the orthogonal MC-CDMA with the conventional PN sequence.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.5A
• /
• pp.436-444
• /
• 2005

Unitary matrix modulation (UMM) is investigated in multiple antennas system that is called unitary space-time modulation (USTM). In an OFDM, the diagonal components of UMM with splitting over the coherence bandwidth (UMM-S/OFDM) have been proposed. Recently LDPC code is strongly attended and studied due to simple decoding property with good error correction property. In this paper, we propose LDPC coded UMM-S/OFDM for increasing the system performance. Our proposed system can obtain frequency diversity using UMM-S/OFDM like USTM/OFDM, and large coding gain using LDPC code. The superior characteristics of the proposed UMM-S/OFDM are demonstrated by extensive computer simulations in multi-path Rayleigh fading channel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.6
• /
• pp.1064-1074
• /
• 1994

In this paper, an optimum TCM(trellis coded modulation)combined with CPM(continuous phase modulation) signal is investigated, and the performances are evaluated on the two-ray fading channel, which is one of the well-known frequency-selected because of their relatively good power and spectrum efficiency, and the modulation index is varied from 0.1 to 0.6. The performance is evaluated for each modulation index. The constraint length of the encoder, which is comprised in TCM, is chosen to be 2 and 3. From the performance evaluations, when the constraint length is 3 and modulation index 0.5, a power gain if the optimum TCM over the scheme without coding is observed to be 2.0dB for 1REC and 2.1dB for 3RC, respectively, on the fading channel. Thus, a significant improvement on the line quality is expected when the optimum TCM presented in this paper is employed in digital mobile radio applications.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.1A
• /
• pp.51-56
• /
• 2007

Unitary matrix modulation (UMM) is investigated in multiple antennas system that is called unitary space-time modulation (USTM). When we consider only diagonal components of UMM with splitting over the coherence bandwidth, the system can obtain frequency diversity in a single antenna system. In Rayleigh fading channel, we compared USTM/OFDM with 2Tx-antenna with UMM-S/OFDM with 1Tx-antenna, conventional multi-level OFDM and UMM-S/OFDM with changing bit rate per Hz. Also, we analyzed SNR for between multi-level modulation STBC/OFDM and multi-level modulation UMM-S/OFDM with changing transmission rate. When it was adaptive multi-level modulation to improve SNR, we did the UMM-S/OFDM system performance analysis of N-ary PSK and M-ary QAM.