• Journal of the Korean Society of Costume
• /
• v.52 no.2
• /
• pp.71-80
• /
• 2002

The purpose of this study was to examine the correlation between the shape of the foot and foot abrasion. and to provide preliminary data for shoe manufacturing by comparing the length of a woman's feet and the shoe size. The Martin calibrator and measuring tapes were utilized to measure the shapes of 163 female college students' feet. Indirect measurements were also obtained by line drawing of the feet for additional analysis. Brief questionnaires about what type of shoes are worn were given to the subjects of the study. Data analysis was presented by frequency, percentage, and standard deviations. Factor analysis and correlation co-efficiency of data was conducted on the significance level of p〈.05. The results of the study are as follows (1) The average number of days per week in which the subjects wear ladies' shoes per week were 4.5. Little over half of the subjects (53.87% ) answered that they wear heeled shoes for more than 8 hours per day. The most preferred height of a ladies'shoe heel was between 2 cm and 4 cm, as replied by 41.0% of the subjects. (2) The foot area where abrasion occurs most often was around the heel (51.2%) and the middle part of the sole (50.9%) (3) Factors correlated to the heel abrasion included the circumference and the breadth of the foot. The abrasion on the side of the first toe of mid-sized feet was most affected by the angle of the first the and inner foot line. The height of the foot heel was a significant factor for the abrasion near the anklebone. In conclusion, the abrasion resulted from the inappropriate fitting of the shoe and the foot. Also, the circumference and the width factors were more influential rather than the foot length. Therefore, more database on this should be systemized and available to the footwear manufacturers and the customers for more practical use of shoe size and public education.

• Journal of the Korean School Mathematics Society
• /
• v.3 no.1
• /
• pp.149-163
• /
• 2000

The Ministry of Education have had us practice the performance test as a substitute proposal, however, all the more for the idealistic purport, our education front does not have such a sufficient condition as to practice the performance test for many classes and miscellaneous duties and over-populated class, and that practice has been enforced so abruptly without any drastic preparation and has caused much confusion from the beginning of that enforcement. Thus, these problematic concerns are remained as the tasks of the teachers to be solved by themselves in the front of education, and herein I came to do this research. The followings are the conclusions that I got as the results of the research (1) Performance test style should be applied in consideration of the students' achievement level and the gap of the teachers' recognition; descriptive test, portfolio assignment and formative test styles were proper for the students lacking basic study ability. (2) Descriptive test should have its beginning with the question items to which students can write the problem solving procedure logically rather than those to evaluate the creation ability and thinking ability: and putting down specifically the assessment standard could prevent students' confusion and scheme the impartiality of the assessment. (3) Portfolio assignment evaluation should be given with as interesting and suitable amounts as possible so that the students can do by themselves. (4) Utilizing the performance test table enabled easy management of documentary evidence. And it is needless to say that the success of the performance test should have preceding conditions like the teachers' understanding and their positive participation. Therefore, I'd like to give suggestions herein like the followings; (1) The performance test should not always be made into grades, and there is a need to develop the test gradually in the condition that the education surroundings permit by checking time, frequency, ratio and contents of the test while practicing the multiple choice writing test. (2) As long as the performance test has the aims of improving the studying and learning activities, any performance test only for the sake of making numerals with the thought that assessment is the disposal of the grades should be avoided, and the change of the lecturing styles and development of various assessing types and studying materials should be endeavored to confirm with the aims.

• Geomechanics and Engineering
• /
• v.21 no.6
• /
• pp.513-525
• /
• 2020

Slopes stabilised with piles are seldom analysed considering uncertainties in the parameters of the pile-slope system. Reliability analysis of the pile-slope system quantifies the degree of uncertainties and evaluates the safety of the system. In the present study, the reliability analysis of a slope stabilised with piles is performed using the first-order reliability method (FORM) based on Hasofer-Lind approach. The implicit performance function associated with the factor of safety (FS) of the slope is approximated using the response surface method. The analyses are carried out considering the design matrices formulated based on both the 2^k factorial design augmented with a centre run (2^k fact-centred design) and face-centered cube design (FCD). The finite element method is used as the deterministic model to compute the FS of the pile-slope system. Results are compared with the results of the Monte Carlo simulation. It is observed that the optimum location of the row of piles is at the middle of the slope to achieve the maximum FS. The results show that the reliability of the system is not uniform for different pile configurations, even if the system deterministically satisfies the target factor of safety (FS_t) criterion. The FS_t should be selected judiciously as it is observed that the reliability of the system changes drastically with the FS_t level. The results of the 2^k fact-centred design and FCD are in good agreement with each other. The procedure of the FCD is computationally costly and hence the use of 2^k fact-centred design is recommended, provided the response of the system is sufficiently linear over the factorial space.

• Journal of Preventive Medicine and Public Health
• /
• v.38 no.4
• /
• pp.443-448
• /
• 2005

Objectives : This study was done to evaluate the reliability of education and occupational class between using the health survey and the death certificate data. Methods : The 1998 National Health and Nutrition Examination Survey (NHANES) was conducted on a cross-sectional probability sample of South Korean households, and it contained unique 13-digit personal identification numbers that were linked to the data on mortality from the Korean National Statistical Office. The data from 263 deaths were used to estimate the agreement rates and the Kappa indices of the education and occupational class between using the NHANES data and the death certificate data. Results : The simple and weighted Kappa indices for education were 0.60 (95% CI=0.53-0.68) and 0.73 (95% CI=0.67-0.79) respectively, if the educational level was grouped into five categories: no-formal-education, elementary-school, middle-school, high-school and college or over. The overall agreement rate was 71.9% for these educational groups. The magnitude of reliability, as measured by the overall agreement rates and Kappa indices, tended to increase with a decrease in the educational class. The number of non-educated people with using the death certificate data was smaller than that with using the NHANES data. For the occupational class (manual workers, non-manual workers and others), the Kappa index was 0.40 (95% CI=0.30-0.51), which was relatively lower than that for the educational class. Compared with the NHANES, the number of non-manual workers for the deceased who were aged 30-64 tended to be increased (8 to 12) when using the death certificate data, whereas the number of manual workers tended to be decreased (59 to 41). Conclusions : The socioeconomic inequalities in the mortality rates that were based on the previous unlinked studies in South Korea were not due to a numerator/denominator bias. The mortality rates for the manual workers and the no-education groups might have been underestimated.

• Economic and Environmental Geology
• /
• v.16 no.3
• /
• pp.163-221
• /
• 1983

Main aspects of this study are to clarify geochronology and petrogenetic processes of the so-called Hongjesa granite, which is a member of various intrusive rocks exposed in the northeastern part of the Ryongnam Massif, one of the Precambrian basements of South Korea. In this study, the Hongjesa grainte is divided into four rock units based on the geologic age, mineralogical and chemical constituents, and texture: the Precambrian Hongjesa granite gneiss (Hongjesa granite Proper) and leucogranite gneiss, the Paleozoic gnessic two mica granite, and the Jurassic muscovite granite. The Hongjesa granite gneiss is identified by its grayish color, slight foliation, and porphyroblastic texture. The leucogranite gneiss is distinct by its light gray color, sand medium to coarse grained texture. The gneissic two mica granite is distinguished from others by its strong foliation, containing gray-colored feldspar phenocrysts with biotite and muscovite in varying amounts. The muscovite granite occurs as a small stock containing feldspar phenocrysts along margin of the stock. These granitic rocks vary widely in composition, reflecting the facts that they partly include highly metamorphosed xenolith and schlierens as relics of magmatic and anatectic processes. In particular, grayish porphyroblasts of microcline perthite is characteristic of the Hongjesa granite gneiss, whereas epidote and garnet occur in both the Hongjesa granite gneiss and leucogranite gneiss. These minerals are considered to be formed by potassic metasomatism and contamination of highly metamorphosed rocks deeply buried under the level of the Hongjesa granite emplacement. The individual synchronous granitic rocks plotted on Harker diagram show mostly similar trends to the Daly's values. The plots of the Hongjesa granite gneiss and gneissic two mica granite concentrate near the end part of the calc-alkalic rock series on the AMF diagrams, whereas those of the leucogranite gneiss and muscovite granite indicate the trend of the Skaergaard pluton. These granitic rocks plotted on a Q-Ab-Or diagram (petrogeny's residua system) fall well outside the trough of the system. This can be attributed to the potassic matasomatism of these rocks. On the ACF diagram, these rocks appear to be dominantly I-type prevailing over S-type. The K-Ar ages, obtained from a total of 7 samples of the leucogranite gneiss, gneissic two mica granite, muscovite granite, porphyritic alkali granite, and rhyolitic rock, in addition to the Rb/Sr ages of the Hongjesa granite gneiss by previous workers, permit the rock units to be arranged in the following chronological order: The middle Proterozoic Hongjesa granite gneiss (1714-1825 m.y.), the upper proterozoic leucogranite gneiss (875-880 m. y.), the middle Paleozoic gneissic two mica granite (384 m. y.) the upper Jurassic muscovite granite (147 m. y.), the Eocene alkali granite (52 m. y.), and the Eocene rhyolitic rock (45 m. y.). From the facts and data mentioned above, it is concluded that the so-called Hongjesa granite is not a single granitic mass but is further subdivided into the four rock units. The Hongjesa granite gneis, leucogranite gneiss, and gneissic two mica granite are postulated to be either magmatic or parautochtonous, intrusive, and the later muscovite granite is to be magmatic in origion.

• Journal of Korean Academy of Nursing
• /
• v.29 no.6
• /
• pp.1294-1303
• /
• 1999

The purpose of this study was to develop a tool to assess the powerlessness and to measure the powerlessness of elderly. From the result of pre-test, twenty seven items were finally selected to survey the elderly's powerlessness. The questionnaires on the elderly's powerlessness were drafted so that such tool may be evaluated in accordance with the four point Likert Scale. The number of subjects is 1,150 with ages of 60 years or more and who live in a large city, a small and middle-sized city and a rural area. The subjects of the test and retest were 85 elderlies. Collected data were analyzed by utilizing SAS program with Cronbach's $\alpha$ and Pearson's correlation, factor analysis method and known group techniques, descriptive statics, t-test and ANOVA. The results from this study were summarized below:1. When the factor analysis method was applied for validity, the tool for powerlessness of elderly was separated into 5 factors: loss of self-confidence to deal with physical, emotional, social aspects of life; expulsion by others from meaningful human relate; perception that life is meaningless and time passes quickly; falling behind young people; being rejected by other people, having no influence on others. An application of the known group technique showed a significant difference with the result of the degree of elderly's powerlessness tools developed by the two groups, with illness and without. 2. In testing reliability, it was found that coefficient of test-retest was .9435(P<.0001) when the test-retest method was used as a test of stability, and that the alpha coefficient of internal consistency was .9141 over all items within the tool of elderly's powerlessness 3. In powerlessness of elderly, total mean is 2.8493. And in factor of powerlessness, the highest factor is falling behind young people (M=3.1713), the lowest factor is loss of self- confidence to deal with physical, emotional, social aspects of life(M=2.6080). 4. The results from the test for the degree of powerlessness, according to the subject's demographic variables, showed that there were significant differences between age, sex, marital status, educational level, religion, possession of house, job, monthly pocket money, health status, illness and a place of residence.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.14 no.2
• /
• pp.117-128
• /
• 1990

The purpose of this study is to find fitness of brassiere by means of body measuring value, its variation volume, the evaluation of perceptive image, and the evaluation of the sense of wearing. The results were as follows; 1) According to comparison for body measuring value before and after wearing brassiere, bust point (B.P.) height, lower bust height, upper chest circumference, chest circumference, and bust depth are increased, and lower chest circumference, bust point breadth, shoulder middle point - B.P., B.P. -under bust, and cup horizontal girth are decreased. 2) The difference of variation volume by material is not accepted. The part above $20\%$ at variation rate is under the region of the armpit, that is, the region connected arm from the back. 3) The subjects replied that they wore the brassiere in order to compensate the breast and needed to wear it regardless of thiness and obesity. They wore the brassiere in order to dress themselves in good shape, and felt that it put pressure upon the body, while it had nothing to do with adjusting bodily temperature and gave the sense of security. 4) The estimate of the sense of wearing by material is recognized as the difference of the attention at attentive level $1\%$. The multiple factor analysis of each item in the sense of wearing showed that the items which are explained over $90\%$ by common factors are '1. Unpreasant in touch', '2. The part of edge is haggard', '15. Not to be fit'.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.34 no.3
• /
• pp.480-491
• /
• 2010

This study investigates the body satisfaction and fitness apparel depending on age and silhouette. The subjects were 254 females 20~50 years of age living in Chungju South Korea. There are various body types in women over the age of 35, the lower part of the body-development type, regular type, the upper part of the body-development type, and the rectangular body type. In addition, there is a lower satisfaction level in circumferences related with apparel fit, especially in the sleeve length, armhole, and crotch length. Therefore, a size system is needed that considers various body types in ready-to-wear clothing for middle-aged women. Design, color, and pattern are most important in clothing purchases by unmarried women, but the ease of laundry management and price discounts are the most significant for clothing purchases by married women. The upper part of the body-development type is unsatisfactory in the size-fit of sleeve length and shoulder width, but the lower part of the body-development type is unsatisfactory in the circumference of the waist, hip, abdominal, girth of skirt, and crotch length. The rectangular body type and the lower part of the body-development type are unsatisfactory in movement comfort, especially in hip girth and crotch length. The upper part of the body-development type is unsatisfactory in the movement comfort of the chest and elbow girth.

• Korean Journal of Community Nutrition
• /
• v.7 no.4
• /
• pp.495-505
• /
• 2002

A study was performed to develop as a screening tool the Simple Evaluation Questionnaire for Screening the Over-weight-type Dietary Pattern in 30 to 49 Year Old Adults. We used the data from the 30 to 49 year old subjects who participated in the three surveys - the health behavior survey, the dietary habit survey and the food intake survey - as the National Health and Nutrition Survey 1998. The 3,598 adults were classified into to two body fatness groups of normal (including underweight) and overweight (including obese) on the basis of their relative body weight (RBW) When comparing variables between the two groups, significant differences were found in gender, education, job, employment status, perceived health status, sadness / depression state, stress level, age, number of diseases, age when overweightedness started, maximum body weight, sleep length, drinking pattern (yes/no) , amount of alcoholic drinks, frequency of intoxication or drunkeness, amount of alcoholic drinks when drunk, intensity of exercise, frequency of exercise, exercise duration, skipped meals, small meals and drug supplements. In terms of food intake, there were significant differences in the daily food intake in terms of breakfast, dinner, daily kimchi and dairy products. In terms of mealtimes, we found differences in the amount of cooked rice at breakfast, kimchi at lunch, soup / kuk at dinner, fresh vegetables for snacks, fried foods for snacks between breakfast and lunch, and fruits /juices for snacks between lunch and dinner. After developing questions with indicators and analyzing the indicators by logistic regression analysis three times, we chose 10 questions for a simple evaluation of dietary patterns for the overweight-type category in order to give one point each. Among them we selected two questions to add one additional point and one question to add two additional points. The average scores of the overweight and normal groups, as shown by the developed questionnaire, were $5.97 \pm 2.36 \pm 7.36 \pm 2.21$, respectively. A score of seven points was selected as the cut-off point. We examined the sensitivity, specificity and positive predictive value of the questionnaire to the results of 67%, 59% and 62%, respectively.

• Journal of Welding and Joining
• /
• v.16 no.4
• /
• pp.39-46
• /
• 1998

$CO_2$ gas shielded arc welding has been characterized with its harsh arc compared to Ar-based shielding gases and with its high level of spattere specially in welding current range of 250~300 amperes. In this range of welding current, the metal transfer mode showed to be changed from short circuit to globular with the increase of welding voltage resulting in so-called the transitional mode in which both modes of transfer appeared together. To characterize the transitional mode, the short circuit events were divided into two groups, i.e. normal short circuit (N.S.C) which has short circuit time $(t_s)$ over 2msec and instantaneous short circuit (I.S.C) of $t_s$$\leq$2msec. The experimental results showed that the number of N.S.C decreased almost linearly with the increase of welding voltage and appeared to be not related with spatter generation rate. However I.S.C became to be pronounced in the transitional condition and its number reached the maximum value at around 29.0 volts. Considering the relation with the spatter generation rate, it was found that the number of I.S.C had a very strong correlation with the spatter generation rate of the transitional condition. It was further demonstrated that spatter generation rate decreased quite linearly with the decrease of I.S.C frequency. It implies that I.S.C is the most important waveform factor controlling the spatter generation of the transitional mode, i.e. in the middle range of welding current. Based on these results, It was discussed that in the transitional mode the basic concept of waveform control for suppressing spatter generation would be different from the one applied for typical short circuit transfer mode of low welding current.