• Journal of Korean Ophthalmic Optics Society
• /
• v.17 no.4
• /
• pp.381-388
• /
• 2012

Purpose: In this study, the changes in the shape of silicone hydrogel lenses, dryness of lens and objective/ subjective symptoms that could be induced by repeating dryness of lens and objective/subjective symptoms were investigated. Methods: After drying and rehydrating of silicone hydrogel lenses with different lens material and thickness for 4 times, their overall diameters and base curves were compared. Subjective symptoms, non-invasive tear break-up time (NIBUTs) and blinking rate were evaluated after wearing dehydrated silicone hydrogel lens. Results: Overall diameter and base curve increased in all tested silicone hydrogel lenses by repeating dryness and rehydration. The degree of change in over all diameter and base curve were variable on the material. There were irregular change of lens parameters in thicker lens. When the subjects wore silicone hydrogel lenses after drying and rehydrating, their NIBUTs were decreased and blink rates were increased regardless of lens material or thickness. In addition, repetitive drying of silicone hydrogel lenses affected the lens fitting. Therefore, subjective symptoms such as itching, pain, irritation, foreign body sensation, dryness tended to be increased. Conclusions: The results obtained from the study may suggest to develop durable silicone hydrogel contact lenses against dry environment since the changes in parameters of silicone hydrogel lens and the subjective discomfort were observed after repetitive drying and rehydration.

• Journal of Korean Medicine Rehabilitation
• /
• v.18 no.3
• /
• pp.147-156
• /
• 2008

Objectives : Oriental Medicine Music Therapy is a new way of treating and preventing various diseases and promoting health by means of music specially picked and designed to produce Qi(氣) fitting to an individual person in the areas of the structure of human body, physiological function, pathological change, diagnosis and treatment. Therefore, it can facilitate the efficiency of the treatment much better and faster than only with herb or acupuncture. Equilibrium between body and mind is its originality. Methods : A 38-year old man came to hospital suffering from left side weakness, dysarthria because of cerebral infarction. After one week's medication in the part of neurology, he was sent to the oriental medicine music therapy center, and he took ten times' medical treatments once a day. Before and after the treatments, implementing 'Ink foot print analysis', as for the movement capacity and walking of left side weakness, these results are acquired. Results and Conclusions : 1. Before the oriental medicine music therapy, except the acceleration and deceleration section, within three meters, a right foot's step was measured 30.55 cm and a left foot was measured 15.2 cm, and the step distance was 15.2 cm. After the 10 times treatments, the right foot's step was 112.6 cm, the left foot's step was 113 cm, and the step distance improved to 51.8 cm. 2. The normal person's average step is about 38 cm, and it could be decreased owing to a decreptitude, pain, fatigue, and the weakness of the legs. In spite of all, from the increased 50 cm step measurement with the patient's body condition, it means that his movement capacity is recovered. 3. In the measurement of walking time, before 10 times treatments, it took 46.35 seconds within 6M, but after the treatments, it increased to 7.47 seconds as same as a normal person's walking speed. 4. In insomnia, and the abnormality of a facial muscle, it shows lots of improvement, and even the accuracy of a pronunciation, but despite of the 10 times treatments, the 'ㄹ(r)' sound placed under a vowel is unclear. 5. Before the 10 times' treatments, he can move the left side shoulder with pain and cannot move below the left elbow. After the treatments, the pain was disappeared, and he was able to move over 60 cm without pain. And improving of the movement of fingers, he can beat over 8 times with a drumstick.

• Water for future
• /
• v.14 no.4
• /
• pp.35-52
• /
• 1981

This study is to evaluate the areal precipitation from the basic data groups of monthly, seasonal, and annual rainfalls over all ma in stations in Korea. The evaluating pocesses are performed through the point and regional frequency analysis from the basic data. The basic data groups are divided into two periods-the first(1916-1944) and the second (1960-1979)-which are compared with each other. In the point frequecny analysis, the variable transformation method is applied to the best fitting distribution, and the normal fittings are established by using the Chisquare test method. In the regional frequency analysis, the geomorphologic factors and hydrometeorological factors are taken into consideration when dividing into five zones and Thiessen method and the Isohyetal method are applied. The results of this study are as follows: 1)The areal precipitation values of the first period are about 70-80mm less than that of the second period for the whole of Korea. Therefore, a new precipitation value of 1180mm is considered more suitable than the value of 1159mm, which has been up till now. 2)As the annual areal precipitiation values areevaluated over the five divide zones, it tis noticed that the difference between the values of the first period and the second is the largest in spring (to the extent of 5 times that in the other seasonas). Thereform it is considered that this result is necessary for the establishment of a timely insurance plan for the water resources. 3)The application of the Isohyetal method through the division of Korea into five zones is considered to be a reasonable procedure in the analysis of areal precipitation.

• Journal of the Korean Geographical Society
• /
• v.39 no.2
• /
• pp.212-228
• /
• 2004

This paper is concerned with an important aspect of regional income convergence, ${\beta}$-convergence, which refers to the negative relationship between initial income levels and income growth rates of regions over a period of time. The common research framework on ${\beta}$-convergence which is based on OLS regression models has two drawbacks. First, it ignores spatially autocorrelated residuals. Second, it does not provide any way of exploring spatial heterogeneity across regions in terms of ${\beta}$-convergence. Given that empirical studies on ${\beta}$-convergence need to be edified by spatial data analysis, this paper aims to: (1) provide a critical review of empirical studies on ${\beta}$-convergence from a spatial perspective; (2) investigate spatio-temporal income dynamics across the U.S. labor market areas for the last 30 years (1969-1999) by fitting spatial regression models and applying bivariate ESDA techniques. The major findings are as follows. First, the hypothesis of ${\beta}$-convergence was only partially evidenced, and the trend substantively varied across sub-periods. Second, a SAR model indicated that ${\beta}$-coefficient for the entire period was not significant at the 99％ confidence level, which may lead to a conclusion that there is no statistical evidence of regional income convergence in the US over the last three decades. Third, the results from bivariate ESDA techniques and a GWR model report that there was a substantive level of spatial heterogeneity in the catch-up process, and suggested possible spatial regimes. It was also observed that the sub-periods showed a substantial level of spatio-temporal heterogeneity in ${\beta}$-convergence: the catch-up scenario in a spatial sense was least pronounced during the 1980s.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.3B
• /
• pp.279-289
• /
• 2006

The reconstruction of low dimension nonlinear behavior from the hydrologic time series has been an active area of research in the last decade. In this study, we present the applications of a powerful state space reconstruction methodology using the method of Support Vector Machines (SVM) to the Great Salt Lake (GSL) volume. SVMs are machine learning systems that use a hypothesis space of linear functions in a Kernel induced higher dimensional feature space. SVMs are optimized by minimizing a bound on a generalized error (risk) measure, rather than just the mean square error over a training set. The utility of this SVM regression approach is demonstrated through applications to the short term forecasts of the biweekly GSL volume. The SVM based reconstruction is used to develop time series forecasts for multiple lead times ranging from the period of two weeks to several months. The reliability of the algorithm in learning and forecasting the dynamics is tested using split sample sensitivity analyses, with a particular interest in forecasting extreme states. Unlike previously reported methodologies, SVMs are able to extract the dynamics using only a few past observed data points (Support Vectors, SV) out of the training examples. Considering statistical measures, the prediction model based on SVM demonstrated encouraging and promising results in a short-term prediction. Thus, the SVM method presented in this study suggests a competitive methodology for the forecast of hydrologic time series.

• Korean Journal of Optics and Photonics
• /
• v.27 no.1
• /
• pp.18-24
• /
• 2016

To effectively utilize a flash and predict its effects on an infrared device, it is essential to know the infrared characteristics of the flash source. In this paper, a study of the IR characteristics of flash light sources is carried out. The IR characteristics of three flash sources, of which two are combustive and the other is explosive, are measured with an IR characteristic measurement system over the middle- and long-wavelength infrared ranges. From the measurements, the radiances over the two IR ranges and the radiative temperatures of the flashes are extracted. The IR radiance of flash A is found to be the strongest among the three, followed by those of sources C and B. It is also shown that the IR radiance of flash A is about 10 times stronger than that of flash B, even though these two sources are the same type of flash with the same powder. This means that the IR radiance intensity of a combustive flash source depends only on the amount of powder, not on the characteristics of the powder. From the measured radiance over MWIR and LWIR ranges for each flashes, the radiative temperatures of the flashes are extracted by fitting the measured data to blackbody radiance. The best-fit radiative temperatures (equivalent to black-body temperatures) of the three flash sources A, B, and C are 3300, 1120, and 1640 K respectively. From the radiance measurements and radiative temperatures of the three flash sources, it is shown that a combustive source radiates more IR energy than an explosive one; this mean, in turn, that the effects of a combustive flash on an IR device are more profound than those of an explosive flash source. The measured IR radiances and radiative temperatures of the flash sources in this study can be used to estimate the effects of flashes on various IR devices, and play a critical role for the modeling and simulation of the effects of a flash source on various IR devices.

• Polymer(Korea)
• /
• v.36 no.6
• /
• pp.712-720
• /
• 2012

Thermal degradation for glass fiber-reinforced polyamide 66 composite (PA 66) with respect of thermal exposure time has been investigated using optical microscopy, scanning electron microscopy and Fourier transform infrared spectroscopy. As the thermal exposure time was prolonged, a slight increase in tensile strength for only initial stage and afterward, a proportional decrease of tensile strength was observed. These results can be explained by the increase of crystallinity, followed by the increase of crosslinking density, chain scission and the decrease in chain mobility, due to thermal oxidation with the exposure time. Fourier transform infrared spectroscopy results showed the increase of ketone peak and silica peak on the surface of thermally exposed PA 66. In addition, the thermal decomposition kinetics of PA 66 was analyzed using thermogravimetric analysis at three different heating rates. The relationship between activation energy and lifetime-prediction of PA 66 was investigated by several methodologies, such as statistical tool, UL 746B, Ozawa and Kissinger. The activation energy determined by thermogravimetric analysis had a relatively large value compared with that from the accelerated test. This may result in over-estimating the lifetime of PA 66. In this study, a master curve of exponential fitting has been developed to extrapolate the activation energy at various service temperatures.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.46 no.1
• /
• pp.56-62
• /
• 2009

In this paper we investigate an analytical approach for noise properties and geometric structure in Computed Radiography(CR) images of industrial steel-tubes. Over thirty diverse radiographic images are sampled from industrial radiography measurements according to radiation intensity. Each image consists of three regions; background, thickness and inner-tube. Among these the region of inner-tube is selected for the object of analysis. Geometric structure which includes the noise generation is analyzed by the statistical and functional methodology. The analysis is carried on spacially and line by line. It verifies the geometrical transfigure from the circle configuration of steel-tube and noise variation. The estimation of fitting function and its error are the geometric factors. The statistics such as standard deviation, mean and signal-to-noise ratio are noise parameters for discrimination. These factors are considered under the intensity variation which is the penetrative strength of radiation. The analysing results show that the original geometry of circle is preserved in the form of elliptic or short/long diameter circle, and the noise deviation has increased inverse proportional to the radiation intensity.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.24 no.2
• /
• pp.242-254
• /
• 2016

This paper is the forth investigation on the evaluation methods of flow characteristics in a steady flow bench. In the previous works, it was concluded that the assumption of the solid rotation might cause serious problems and both of the eccentricity and the velocity profile distort the flow characteristics when using the ISM at 1.75B plane. Also particle image velocimetry (PIV) measurement at this position showed that the real velocity profile was far from the assumption of ISM evaluation. In this paper, the planar velocity profiles were measure from 1.75B to 6.00B position by PIV and the characteristics were examined according to the valve angles and lifts for further investigations about the effect of the position on the velocity profile. The results show that $26^{\circ}$ valve angle is always an unique exceptional case in all aspects. If the valve angle is $21^{\circ}$ and below, the planar velocity profiles according to the lift and the position are similar to each other, however, the tangential velocity curves along with the radial direction have common tendencies up to $16^{\circ}$ angle. Also the well arranged swirl behaviors are generally observed at the position above 3.00B and the velocity contour lines come closer to the concentric circle as the valve lift increases. In addition, the gradient of tangential velocity along with the radial direction from the swirl center becomes stable and constant as the position goes downstream. Concurrently the velocity gradient is larger to the eccentric direction of the center. In the meantime the tangential velocity curves along with the radial direction are irregular and various at 1.75B, however, they become regular and reach higher level as the evaluation position goes downstream. At this time the curves of 4.50B are the best fitted to the ideal one. On the other hand in an exceptional case, $26^{\circ}$, the velocity contours are very complicated over 6mm valve lift regardless the position and the gradient increases to the opposite direction of the eccentric center. Also, 6.00B is a best fitting position in the geometrical cylinder center base. With respect to the swirl center, the distribution range of centers for 1.75B is different to that for the other positions and the eccentricities of this plane are larger regardless the valve angle. After 1.75B, there is no certain tendency in the center position change according to the valve angle and lift. Additionally, the eccentricities are not sufficiently small to neglecting the effect on ISM measurement.

• Journal of the Korean Society of Safety
• /
• v.33 no.2
• /
• pp.52-60
• /
• 2018

This study compares the differences of the fit factor by the order of wearing preference between Particulate filtering facepiece respirators(PFFR) and glasses when participants wore simultaneously and a survey of physical and visual complaint. Recognition level about fit of respirators was investigated and the educational (before- and after-) effect of the fit factor. When participants wore PFFR and glasses, physical complaints were nose pressure, slipping, nose and ear pressure, ear pressure and rim loosen, the most highly physical complaints were nose pressure. Visual complaints were demister, blurry vision, dizziness, visual field, and lens dirty, the most highly visual complaints were demister. But, there was significant difference in physical complaint such as nose pressure(10.3%), slipping (23.0%), nose and ear pressure(14.3%), and rim loosen(16.2%), visual complaint such as visual field(13.8%) and lens dirty(32.4%). For the recognition of fit of respirators, respirators fitness, leak site, an initial point and an object, faulty factor, recognition level was higher. Fit factor was increased after education of proper wearing of respirator. Change of the fit factor was smaller compared to the normal breathing and after 6 actions in case of after education. Questionnaire consisted of general characteristics and physical/visual complaint, recognition of fit. Complaints were measured after the QNFT with multiple choices. Quantitative fit factor was measured by device and compared the result of (before- and after-) educational effect. Also, we selected to 6 actions (Normal breathing, Deep breathing, Bending over, Turning head side to side, Moving head up and down, Normal breathing) among 8 actions OSHA QNFT (Quantitative Fit testing) protocol to measure the fit factors. The fit factor was higher after the training (p=0.000). Descriptive statistics, paired t-test, and Wilcoxon analysis were performed to describe the result of questionnaire and fit test. (P=0.05) Therefore, it is necessary to investigate the quantitative research such as training program and glasses fitting factor about the wearing of PFFR and glasses simultaneously.