• Proceedings of the KSME Conference
• /
• 2002.08a
• /
• pp.11-16
• /
• 2002

In this paper, we present two successful results from active controls of flows over a circular cylinder and a sphere for drag reduction. The Reynolds number range considered for the flow over a circular cylinder is 40-3900 based on the free-stream velocity and cylinder diameter, whereas for the flow over a sphere it is $10^{5}$ based on the free-stream velocity and sphere diameter. The successful active control methods are a distributed (spatially periodic) forcing and a high-frequency (time periodic) forcing. With these control methods, the mean drag and lift fluctuations decrease and vortical structures are significantly modified. For example, the time-periodic forcing at a high frequency (larger than 20 times the vortex shedding frequency) produces $50{\%}$ drag reduction for the flow over a sphere at $Re=10^{5}$. The distributed forcing applied to the flow over a circular cylinder results in a significant drag reduction at all the Reynolds numbers investigated.

• Journal of Korean Society of Forest Science
• /
• v.96 no.5
• /
• pp.572-579
• /
• 2007

Tree species diversity is an important aspect of forest ecosystem stability. Tree species inventories at defined sites and in minimum diameter classes give a reliable indicator of the diversity level as well as the structural stability level of a study site. This study was conducted to investigate the species composition and the stand structure of the natural forest, timber-harvested forest (logged-over forest) and degraded forest of the Oak-twin Township in the Bago Yoma Region of Myanmar. Natural forest showed the highest family and species richness in all the investigated forests. At the family level, Verbenaceae occupied the highest importance value index (IVI) in all the forest stands while teak (Tectona grandis Linn. f.) occupied the highest IVI at the species level. However, the small diameter classes of T. grandis and other commercial species were less than those of big diameter classes in all the investigated forests. This abnormal pattern of diameter distribution could be a problem for the sustainable production of commercial timber species in the near future.

• Korean Journal of Plant Resources
• /
• v.10 no.3
• /
• pp.271-273
• /
• 1997

This study was carried out to obtain basic envirinmental information of the native area and growth characteristics at different age of Dendropanax morbifera LEV. In the southern Korea. The Dendropanax morbifera LEV. Was grown naturally at Wando, Cheju(Mt. Halla), Yecheon(Kermoon island),Sinan(Hong isand), Jindo(Mt. Chermchill) and Haenam(Mt. Taeroon), all between 30 to 450m above the sea level. The soil characterisitics of the native area had a pH of 5.3 to 5.4 with 8.4 to 9.8% content of organic matter and 18.2 to 21.3% soil moisture. Flowering starting in the middle of July begun when the trees were 6 years old. Six year old trees are 129 cm in stem height, 34 mm in stem diameter,15.4 in number of leaves with petioles 12.9 cm long. Xylem sap can be obtained from over 10 year old trees that grew well and have over 10 cm stems in diameter.

• Journal of Technologic Dentistry
• /
• v.26 no.1
• /
• pp.69-76
• /
• 2004

The objective of this finite element method study was to analyze the stress distribution induced on a supporting bone by 3.75mm, 4.0mm, 5.0mm diameter of dental implant fixture(13mm length). 3-dimensional finite element models of simplified gold alloy crown(7mm height) and dental implant structures(gold cylinder screw, gold cylinder, abutment screw, abutment, fixture and supporting bone(cortical bone, cancellous bone) designs were subjected to a simulated biting force of 100 N which was forced over occlusal plane of gold alloy crown vertically. Maximum von Mises stresses(MPa) under vertical loading were 9.693(3.75mm diameter of fixture), 8.885(4.0mm diameter of fixture), 6.301(5.0mm diameter of fixture) and the highest von Mises stresses of all models were concentrated in the surrounding crestal cortical bone. The wide diameter implant was the good choice for minimizing cortical bone-fixture interface stress.

• Journal of Technologic Dentistry
• /
• v.6 no.1
• /
• pp.19-26
• /
• 1984

This Experimental study was performed to study the effect of the heat soaking and the diameter of pattern on the casting ability of three nonprecious alloys manufactured for porcelain-metal restorations, with respect to their ability to reproduce test pieces by casting over a selected range of uniform diameters. Samples of total 60 were constructed and divided into 6 groups according to the two variables, the diameter and the heat soaking. The completed cast samples were examined visually and measured with a caliper calibrated to 0.05mm. The results obtained were as follows: 1. Length cast was significantly related to the diameter to be cast, especially in the case of the marrowest diameter of 230m. 2. Length cast not significantly related to the heat soaking. 3. The completeness of casting was significantly related to the diameter to be cast, particularly in the case of the narrowest diameter of 230m. 4. The completeness of casting was not significantly related to the heat soaking. 5. All of the three nonprecious alloys used for this experiment were significantly different from an ideal alloy in the completeness of casting.

• The Korean Journal of Nuclear Medicine
• /
• v.28 no.3
• /
• pp.350-356
• /
• 1994

Purpose : Hepatic arterial perfusion scintigraphy with Tc-99m-macroggregated albumin (HAPS) study was carried out in 16 patients with hepatocellular carcinoma(HCC) and in six patients without liver tumor to evaluate HAPS findings of hepatocellular carcinoma and usefullness of HAPS. Materials and Methods : HAPS with planar and SPECT study were performed in 22 patients after conventional hepatic or celiac arteriography. For HAPS study, 4-5 mCi of MAA mixed with 2ml of saline was injected into proper hepatic artery or its distal branches at the rate of approximately 1ml/sec. We analysed 21 HCCs over 2cm in diameter(average diameter; 6.4cm) and 17 of 21 HCCs were over 4cm in diameter(Table 1). CT, sonography and angiography were performed within two week in all 16 patients and liver scan was performed in 12 patients. Results : Three different pattern of tumor perfusion were observed in 16 patients with HCC (Table 2). 1) diffuse increased perfusion in 16 of 21(76%)(Fig. 1) 2) increased peripheral perfusion in 4 of 21(19%) (Fig. 2) 3) diffuse decreased perfusion in 1 of 21 (5%) Arteriovenous shunt indicated by lung uptake of MAA were observed in 9 of 16(56%)(Fig. 4). In contrast, angiography demonstrates arteriovenous shunt in 2 of 16(13%). There was no accumulation of radioactivity on RBC-blood pool scan in all six patients with HCC examined (Fig. 1). Conclusion : HAPS is useful study in evaluation of perfusion pattern or vascularity of HCC and in detection of arteriovenous shunt.

• Journal of Korea Foresty Energy
• /
• v.20 no.1
• /
• pp.62-72
• /
• 2001

To elucidate the behaviors of alkali swelllng of woods. the dimensional change in cross section of cell elements of four major Korean woods during alkali swelling were examined by an optical microscory, an imaging analysis method and an X-ray diffrartion During alkali swelling, tracheid diameter of Larix kaempferi wood showed greater swelling property than that of Pinus koraiensis wood, and the cell wall swelled highly over 10% sodium hydroxide solution treatment. The radial diameter of vessel elements in earlywood shrunk, but it swelled slightly in tangential direction. When treated with 5% NaOH, the wall thickness of wood fiber increased about three times over the original one. The thickness of cell wall in all elements and the diameter of wood fiber and tracheid showed almost isotropic shrinkage. The diameter of cell elements during the mercerization process decreased, but cell wall thickness Increased. Crystal transformation of cellulose in wood was not occurred by alkali treatments. but relative crystallinity and crystallite width of the woods increased slightly. Consequently, it was demonstrated that the swelling properties of woods were dependant on wood species, cell elements and alkali concentration.

• The Journal of the Korean life insurance medical association
• /
• v.9
• /
• pp.122-129
• /
• 1990

Authors analyzed sonographic findings of 59 cases of hepatic hemangioma, with had been diagnosed through examination in our Medical. dept, from Januray, 1985 to December 1989. The results of the analysis are as follows: 1) The hepatic hemangioma was found in 59 cases(0.33%) among the 17,714 insureds. 2) In all 59 cases who have hemangioma, hemangioma was found in 37 cases(0.35%) among the 10,724 insureds of male, and in 22 cases(0.31%) among the 6,990 insureds of female. 3) The possessing rate of hemangioma in male was increased by age regardless of sex-5/2,120 cases(0.24%) in $21{\sim}30$ years, 25/8,122 cases(0.31%) in $31{\sim}40$ years, 16/4,997 cases(0.32%) in $41{\sim}50$ years, 8/1,775 cases(0.45%) in $51{\sim}60$ years, and 5/359 cases(1.39%) in over 61 years. 4) The tumor involved right lobe of the liver in majority(71.4%) 5) The size of tumor was 10 lesions in under 10 mm, 58 lesions in $31{\sim}50$ mm, and 6 lesions in over 51 mm. The smallest tumor was 8 mm in diameter and the largest was 72 mm in diameter and 78 lesion(92.8%) were less than 50 mm in size. 6) Posterior acoustic enhancement was noted in 4 lesions among 68 lesions of less than 30 mm in long diameter, and in 4 lesions among 16 lesions more than 30 mm in long diameter. 7) Echographically most of the lesions presented as a round or oval high homogeneous echogenic mass, although a few mass appeared to be hypoechoic or Mixed echogenic. Finally a small round echogenic, sharply-marginated and internally homogeneous lesion is highly suggestive of hemangioma. If the hypoechoic lesion has homogeneous internal echoes and/or strong marginal echoes, it is also suggestive of hemangioma.

• Korean Journal of Optics and Photonics
• /
• v.18 no.4
• /
• pp.256-263
• /
• 2007

High NA objective design by using SELFOC materials was studied, and two kinds of objective for optical pick-up were designed. The SELFOC materials have radial gradient index distribution, and it gives additional degree of freedom in optical design. Therefore, we expect that optical design of high NA objective without aspheric surface will be possible. In this study, the variation of ms spot diameter was investigated as a function of quadratic constant and refractive index on axis for various combinations of axial thickness and entrance pupil diameter. For the survey, Code V was used for optimization and evaluation of the objective lenses. The result suggested that larger quadratic constant and higher refractive index on axis could give us better imaging performance for all combinations of axial thickness and pupil diameter. Based on the survey, we designed high NA objectives for DVR. There were two kinds of design solution consisting two spherical SELFOC lenses. The solution I had positive-positive lens configuration with short over-all-length, but it had poor off-axial performance compared with the solution II. The solution II had negative-positive lens configuration with good off-axial imaging performance. But the solution II had some disadvantages, long over-all-length and large diameter of the second lens.

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.5_6
• /
• pp.319-323
• /
• 2003

Let P be a set of n points in the plane. A minimum spanning tree(MST) is a spanning tree connecting n points of P such that the sum of lengths of edges of the tree is minimized. A diameter of a tree is the maximum length of paths connecting two points of a spanning tree of P. The problem considered in this paper is to compute the spanning tree whose diameter is minimized over all spanning trees of P. We call such tree a minimum-diameter spanning tree(MDST). The best known previous algorithm[3] finds MDST in $O(n^2)$ time. In this paper, we suggest an approximation algorithm to compute a spanning tree whose diameter is no more than 5/4 times that of MDST, running in O(n$^2$log$^2$n) time. This is the first approximation algorithm on the MDST problem.