• Journal of Information Technology Services
• /
• v.11 no.1
• /
• pp.141-153
• /
• 2012

USM(Unit Service Management System) is the development tool and methodology to handling the event process in a U-City integrated platform by using the minimum unit services. USM can be one of the SOA development methodology. Minimum unit service has a minimum business logic that can be executed with input and output parameters. Minimum unit service consists of three parts : service profile, service input and output parameters and service execution information. USM provides two types of the execution method. One is module execution and the other is web service execution. The development of the event sinario by the USM development methodology can reduce the cost and duration of the u-service development by raising the rate of reusing minimum unit service.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.05a
• /
• pp.712-713
• /
• 2011

In this paper, the AMBA AXI slave unit that can verify the pipelined arithmetic unit is proposed and the 2-stage 16-bit pipelined multiplier is introduced as design example. The proposed AXI slave unit consists of input buffer block memory, control registers, pipelined arithmetic unit, control unit, output buffer block memory, and AXI slave interface unit. The main operational procedures are divided into the following steps, such as burst-mode input data loading for the input buffer memory, programming of control registers, arithmetic operations for block data in the input buffer memory, and burst-mode output data unloading from output buffer memory to host processor. Because the proposed AXI slave unit is general structure, it can be efficiently applicable to AMBA AXI and AHB slave unit with pipelined arithmetic unit.

• Proceedings of the IEEK Conference
• /
• 2003.11c
• /
• pp.378-381
• /
• 2003

The Channel Coding Unit (CCU) is an integral component of Payload Data Transmission System (PDTS) for the Multi-Spectral Camera (MSC) data. The main function of the CCU is channel coding and encryption. CCU has two channels (I ＆ Q) for data processing. The input of CCU is the output of DCSU (Data Compression ＆ Storage Unit). The output of CCU is the input of QTX which modulate data for RF communication. In this paper, there are the overview, short H/W description and operation concept of CCU.

• Journal of Korean Society of Rural Planning
• /
• v.25 no.3
• /
• pp.1-9
• /
• 2019

Population is important as a fundamental element of local industry and economy, and census data is essential to regional planning and policy making. Although there have been many researches on population and regional planning, there are few studies on population considering spatial unit. In this study, the population of three spatial scales were compared in order to establish the spatial unit suitable for the rural planning. The study area is Gangwon, Chungcheong-Nam, Chungcheong-Buk, Jeolla-Nam, Jeolla-Buk, Gyeonsang-Nam, Gyeonsang-Buk and Jeju province. Population were compared using statistical data analysis, GIS visualization, and spatial statistics. The mean, maximum, minimum, and variance of population were calculated and the coefficient of variation according to spatial unit was compared. The mean, maximum, minimum, and variance of population were calculated and the coefficient of variation according to spatial unit was compared. As the results, the census output area unit is difficult to interpret spatial analysis results. Administrative district unit has the limit that includes areas where the population does not live. The grid unit is well suited to the geographical characteristics but has many disadvantages of the grid with small population. Therefore, It is necessary to complement the limits of the Eup and Myeon-dong administrative district through the grid unit data.

• Journal of Technology Innovation
• /
• v.15 no.1
• /
• pp.203-233
• /
• 2007

This study investigates how characteristics in the value-chain industrial cluster affect the R&D investment and the output of firms in each industries. For this, we try to extract the inter-industrial networking structure from the input-output table in which 17 manufacturing sectors are included. In particular, we will give shape to the "unit structure" which shows the intermediary flows of goods and services between industries in order to get an unit of final demand in a certain industry. Using this "unit structure", we can try the inter-industrial networking analysis and get some indices of centrality and centralization related to the characteristics of each industries in the value-chain industrial cluster. The results show that the centrality in the value-chain industrial cluster does not have any consequence for the R&D investment and the output in each industries. However, there is a correlation between the centralization in the value-chain industrial cluster and the R&D investment and the output of firms in each industries. These results may be very suggestive in bringing up a new frame of industrial cluster policy in a macro level.

• Journal of Biomedical Engineering Research
• /
• v.38 no.4
• /
• pp.183-189
• /
• 2017

Electrosurgical Unit(ESU) is medical equipment that cut or coag tissues using electrical energy. It is used in hospitals' outpatient clinic room and operating room. Improper use of an ESU may cause fatal injuries to the patient, such as burns. So, before using an ESU, make sure that it is supplying enough energy for cut and coag by measuring the output power and checking the output power cable. In this study, we developed a simple ESU power measurement system PW100 that allows anyone to check the basic output power. And PW100 can check the state of the cable associated with the output power before using ESU. Then, we compared the measured output power of the PW100 with an ESU Analyzer which was commercialized, and compared the performance. In the experiment, the output power measured by the PW100 was lower value than an ESU Analyzer's that. However, the PW100's output power measured in the 5% error range and showed stable reproducibility by a low %RSD value.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2023.11a
• /
• pp.173-174
• /
• 2023

In this study, unit-water content was measured using a frequency domain reflecometry(FDR) sensor that complements the problems of the existing unit-water content measurement method to evaluate the unit-water content affecting the workability, durability, and quality of high strength concrete. The experiment used the unit-water content of high strength concrete as a variable, and the accuracy and probability distribution of the unit-water content measured through deep learning were analyzed for the output value output through the FDR sensor. In the case of the unit-water content predicted by deep learning analysis, a high accuracy and high distribution of more than 93% were found within the error range of ± 10 kg/m³. In the future, research is needed to secure high reliability by utilizing data obtained through experiments with various variables.

• Proceedings of the KIEE Conference
• /
• 2003.11c
• /
• pp.349-352
• /
• 2003

A personal low-frequency stimulator is a portable device to relax muscle pains of a person. The stimulator generates combined low-frequency pulses to be applied to pads attached to painful muscles. This paper reports a development of such device with its characteristic analyses. The major components of our stimulator are MCU, high-voltage generating circuit part, high-voltage switching circuit part, input switch part and display unit. High-voltage generating circuit is designed by using a boost converter circuit and allows user control of the output voltage. High-voltage switching circuit, controlled by MCU, generates output voltage to be applied to pads. Input switch part is composed of power supply, intensity selection, mode selection and memory. Display unit adopts a text LCD module to display modes, Intensity, output frequency and user set-up time. Our designed safety circuit, to protect human body from possible electric shock, slowly increases the output voltage to the selected output intensity. It continuously checks the output pulse shape and disable the output when dangerous pulses are detected. This paper also shows some experimental results.

• Smart Structures and Systems
• /
• v.24 no.5
• /
• pp.617-630
• /
• 2019

Currently most of the vision-based structural identification research focus either on structural input (vehicle location) estimation or on structural output (structural displacement and strain responses) estimation. The structural condition assessment at global level just with the vision-based structural output cannot give a normalized response irrespective of the type and/or load configurations of the vehicles. Combining the vision-based structural input and the structural output from non-contact sensors overcomes the disadvantage given above, while reducing cost, time, labor force including cable wiring work. In conventional traffic monitoring, sometimes traffic closure is essential for bridge structures, which may cause other severe problems such as traffic jams and accidents. In this study, a completely non-contact structural identification system is proposed, and the system mainly targets the identification of bridge unit influence line (UIL) under operational traffic. Both the structural input (vehicle location information) and output (displacement responses) are obtained by only using cameras and computer vision techniques. Multiple cameras are synchronized by audio signal pattern recognition. The proposed system is verified with a laboratory experiment on a scaled bridge model under a small moving truck load and a field application on a footbridge on campus under a moving golf cart load. The UILs are successfully identified in both bridge cases. The pedestrian loads are also estimated with the extracted UIL and the predicted weights of pedestrians are observed to be in acceptable ranges.

• Korean Journal of Optics and Photonics
• /
• v.19 no.1
• /
• pp.43-47
• /
• 2008

Nowadays, the pattern size of BLU (Back Light Unit) adopted in TFT-LCD (Thin Film Transistor Liquid Crystal Display) is typically a few tens of micrometers. However, recently, researches on the TFT-LCD output characteristics depending on various types of BLU patterns are being performed in order to improve the output and uniformity. In this study, we analyzed the influence of pattern size, distribution, and areal ratio on the output characteristics.