• 디지털산업정보학회논문지
• /
• 제12권4호
• /
• pp.71-79
• /
• 2016

This study proposes a performance model of a shared bus multi-processor system and analyzes the effect of input/output types on system performance and overload of shared resources. This system performance model reflects the memory reference time in relation to the effect of input/output types on shared resources and the input/output processing time in relation to the input/output processor, disk buffer, and device standby places. In addition, it demonstrates the contribution of input/output types to system performance for comprehensive analysis of system performance. As the concept of workload in the probability theory and the presented model are utilized, the result of operating and analyzing the model in various conditions of processor capability, cache miss ratio, page fault ratio, disk buffer hit ratio (input/output processor and controller), memory access time, and input/output block size. A simulation is conducted to verify the analysis result.

• 센서학회지
• /
• 제21권4호
• /
• pp.303-310
• /
• 2012

We carried out the power performance evaluation for 1.5 MW${\times}$2 by using anemometer installed on WTGS(Wind Turbine Generator System) in the wind farm at Shi-hwa bang-a-mu-ri. In this paper, we compared and analyzed the performance of guaranteed output and measured output of WTGS which includes output curve, output coefficient, AEP(Annual Energy Product) and availability, etc.. The power performance of WTGS was optimized in the low wind speed sections(3 m/s ~ 10 m/s) and the measured output was more produced by AEP 109 % and availability 112 % than the guaranteed output. In addition, we could also cut the high cost of testing WTGS performance by using anemometer as a substitute for weather mast.

• 한국시뮬레이션학회논문지
• /
• 제8권4호
• /
• pp.1-8
• /
• 1999

This paper proposes an ATM switch architecture called Output Queued Batcher-Banyan switch (OQBBS). It consists of a Sorting Module, Expanding Module, and Output Queueing Modules. The principles of channel grouping and output queueing are used to increase the maximum throughput of an ATM switch. One distinctive feature of the OQBBS is that multiple cells can be simultaneously delivered to their desired output. The switch architecture is shown to be modular and easily expandable. The performance of the OQBBS in terms of throughput, cell delays, and cell loss rate under uniform random traffic condition is evaluated by computer simulation. The throughput and the average cell delay are close to the ideal performance behavior of a fully connected output queued crossbar switch. It is also shown that the OQBBS meets the cell loss probability requirement of $10^{-6}$.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1995년도 추계학술대회 학술발표 논문집
• /
• pp.59-70
• /
• 1995

Output performance improvement using fuzzy logic to the conventional control scheme for a magnetic levitation system is presented in this paper, Adverse characteristics of nonlinearity, unstability, system parameter variation, etc, in the levitation system are partially overcome by the general fuzzy control action. Using a PD type compensator, a coarse framework of output performance is provided to the levitation system. Then a fine regulation to the output performance requirement is obtained by the natural description of the control action in the form of fuzzy logic controller. This control action soothes the adverse characteristics of the levitation system. In this way a better output performance can be obtained in a real time experiment.

• 한국통신학회논문지
• /
• 제32권3C호
• /
• pp.323-330
• /
• 2007

CDMA 셀룰라 망의 기지국에 이용될 수 있는 선형 스마트 안테나를 이차원으로 확장시켜 성능의 척도인 출력 신호대잡음비(Output SNR: Output Signal to Noise Ratio), 출력신호대간섭비(Output SIR: Output Signal to Interference Ratio), 출력신호대간섭잡음비(Output SINR: Output Signal to Interference plus Noise Ratio)를 도출 하였다 Beam forming algorithm 으로 SCGM(Simplified Conjugate Gradient Algorithm)을 설정하고 입력신호대 잡음비, antenna element 숫자, 간섭신호의 분포 등을 변화시키며 평면 스마트 안테나의 성능을 simulate 하였다. 간섭신호들의 방위각(Azimuth angle)이 -90도 에서 +90도 사이에서 고르게 분포할 때, 평면 스마트 안테나의 성능은 같은 숫자의 element를 갖는 선형 스마트 안테나의 성능에 근접함을 보였다.

• Journal of Advanced Marine Engineering and Technology
• /
• 제35권8호
• /
• pp.1070-1077
• /
• 2011

본 연구는 해양소수력발전소에서의 튜블러 수차의 성능평가를 위한 현장시험 및 그 결과에 대한 내용을 포함하고 있다. 현장시험용 수차의 발전기 최소출력은 측정된 유효낙차, 출력 그리고 효율을 이용하여 검토되었다. 정격 및 최대 출력시험은 수차 설치현장의 조수간만의 차에 의한 영으로 인하여 동일한 실험조건을 확보할 수 없었기 때문에 모델시험에 의한 성능 데이터를 이용하여 환산된 값을 사용하였다. 현장시험에 의한 수차의 성능은 최소출력, 정격출력, 최대출력 운전점에서 보증출력 및 보증효율을 만족시키는 결과를 나타냄을 확인하였다.

• 전력전자학회논문지
• /
• 제24권4호
• /
• pp.273-278
• /
• 2019

This study proposes a method for improving the overmodulation performance of a three-phase inverter to obtain an enhanced output torque for the AC motors. In the inverter-fed AC motor drives, the output torque of the motor can be enhanced by utilizing the overmodulation region as well as the linear modulation regions of the inverter. The overmodulation method is used for this overmodulation operation of the inverter. However, the voltage gain, the ratio of the output voltage of the inverter to the reference voltage achieved by the conventional overmodulation methods becomes nonlinearly smaller than unity. Therefore, the effect of improving the output torque of the AC motors is insignificant even when the overmodulation region is utilized. In this study, we propose a method that improves the overmodulation performance of the inverter by compensating the limited amount of the reference voltage in the overmodulation operation to enhance the output torque of the AC motors. The effectiveness of the proposed method is verified through the simulations and experiments with an 800 W permanent magnet synchronous motor.

• 한국통신학회논문지
• /
• 제16권2호
• /
• pp.128-136
• /
• 1991

A neural network of multi layer perception type, learned by error back propagation learning rule, is generally used for the verification or clustering of similar type of patterns. When learning is completed, the network has a constant value of output depending on a pattern. This paper shows that the intensity of neuron's out put can be controlled by a function which intensifies the excitatory interconnection coefficients or the inhibitory one between neurons in output layer and those in hidden layer. In this paper the value of factor in the function to control the output is derived from the know values of the neural network after learning is completed And also this paper show that the amount of an increased neuron's output in output layer by arbitary value of the factor is derived. For the applications increased recognition performance of a pattern than has distortion is introduced and the output of partially damaged neurons are first managed and this paper shows that the reduced recognition performance can be recovered.

• Journal of Electrical Engineering and information Science
• /
• 제1권2호
• /
• pp.58-66
• /
• 1996

An adaptive input-output linearization technique of an interior permanent magnet synchronous motor with a specified output dynamic performance is proposed. The adaptive parameter estimation is achieved by a model reference adaptive technique where the stator resistance and the magnitude of flux linkage can be estimated with the current dynamic model and state observer. Using these estimated parameters, the linearizing control inputs are calculated. With these control inputs, the input-output linearization is performed and the load torque is estimated. The adaptation laws are derived by the Popov's hyperstability theory and the positivity concept. The robustness and the output dynamic performance of the proposed control scheme are verified through the computer simulations.

• 한국산학기술학회논문지
• /
• 제16권12호
• /
• pp.8753-8759
• /
• 2015

터빈 발전 사이클에서의 안정적인 발전 출력 유지관리를 위해서는 검증된 성능 측정 데이터 그룹과 이를 바탕으로 한 발전 출력 성능 계산 절차의 수립이 필요하다. ASME PTC(Performance Test Code)의 성능 계산 절차를 기반으로 본 연구에서는 터빈 출력에 의한 발전기 출력 성능 산정을 위해서 터빈 팽창선 모델과 발전기 출력 측정 데이터의 입력 검증 모델을 구성하였다. 또한 불확실한 측정 데이터에 대한 검증 모델도 구성하였다. 지난 연구에서는 신경회로망과 커널 회귀의 학습 방법을 사용하였으나 본 연구에서는 미측정 데이터에 대한 보완을 하기 위하여 서포트 벡터 머신 모델을 사용하여 발전기 출력 계산 데이터의 학습 모델을 구성하였으며, 학습 모델 구성을 위해서 관련 변수의 선정을 위한 절차와 학습 데이터 구간을 설정하는 알고리듬을 개발하였다. 학습의 결과 오차는 약 1% 범위 안에 있게 되어 추정 및 학습 모델로서 유용함을 입증하였다. 이 학습 모델을 사용하여 측정 데이터 중 상실된 부분에 대한 추정 모델을 구성함으로써, 터빈 사이클 보정 성능 계산의 신뢰성을 향상시킬 수 있음을 검증하였다.