• Environmental and Resource Economics Review
• /
• v.15 no.4
• /
• pp.643-672
• /
• 2006

This study has assessed the industrial human toxicity index by means of toxic substances emissions in South Korean industry. The data used in analysis are the 146 kinds of the toxic chemicals emissions and final demands, total outputs in the input-output table. As a results, human carcinogenic index was $11.86198{\times}10^3$ for overall industries, and $0.26360{\times}10^3$ for average. The industries of higher human toxicity index can be ranked as follows: Mother vehicles and parts (7.85033) > Pig iron and crude steel(4.57409) > Primary iron and steel products(4.36668) > Other transportation equipments and parts(3.43293) > Inorganic basic chemical products(2.64379), etc. Such result can be considered as the priority order of regulation based on industrial characteristics, when the demand and industrial policies should be carried out for the deduction fof toxic substances.

• Journal of the Korean Ceramic Society
• /
• v.42 no.3 s.274
• /
• pp.178-181
• /
• 2005

Silicon oxynitride (SiON) layers deposited upon a $SiO_2/Si$ buffer layer placed upon silicon wafers have been obtained by using PECVD from $SiH_4,\;N_2O$, and $N_2$. It can be seen that the refractive index, measured by using a prism coupler, for the SiON films can be varied between 1.4480 and 1.4958 at a wavelength of 1552 nm by changing the process parameters. Optical planar waveguides with a thickness of $6{\mu}m$ and a refractive index contrast ($\Delta$n) of $0.36\% have been deposited. Also, etching experiments were performed using ICP dry etching equipment on thick SiON films grown onto Si substrates covered by a thick $SiO_2$ buffer layer. A polarization maintaining single-mode fiber was used for the input and a microscope objective for the output at $1.55{\mu}m$. As a result, a low index contrast SiON based waveguide is fabricated with easily adjustable refractive index of core layer. It illustrates that the output intensity mode is a waveguiding single-mode.

• The Transactions of the Korean Institute of Electrical Engineers A
• /
• v.48 no.9
• /
• pp.1140-1146
• /
• 1999

In this paper, a force estimation method is proposed for force control without force sensor. For this , a disturbance observer is applied to each joint of an {{{{ { n}_{ } }}}} degrees of freedom manipulator to obtain a simple equivalent robot dynamics(SERD) being represented as an n independent double integrator system. To estimate the output of disturbance observer due to internal torque, the disturbance observer output estimator(DOOE) is designed, where uncertain parameters of the robot manipulator are adjusted by the gradient method to minimize the performance index which is defined as the quadratic form of the error signal between the output of disturbance observer and that of DOOE. when the external force is exerted, the external force is estimated by the difference between the output of disturbance observer and DOOE, since output of disturbance observer includes the external torque signal as well as the internal torque estimated by the output of DOOE. And then, a force controller is designed for force feedback control employing the estimated force signal. To verify the effectiveness of the proposed force estimation method, several numerical examples and experimental results are illustrated for the 2-axis direct drive robot manipulator.

• The Journal of Fisheries Business Administration
• /
• v.41 no.3
• /
• pp.21-44
• /
• 2010

The paper estimates changes in total factor productivity and technical efficiency change index and technical change index using Malmquist productivity index(MPI) in fisheries wholesale products over the time period of 2006 through 2008. The model considers a number of employees and operating costs as input factors, and sales and EBIT(earnings before tax and interest) as output factors. The results indicate that, between 2006 and 2007, there is in general technical progress in which TCI(Technical Change Index) indicates 2.7994 in the sale scale of 50 million won through 100 million won, while there are no efficiency in TECI(Technical Efficiency Change Index), PECI(Pure Efficiency Change Index) and SECI(Scale Efficiency Change Index) which are estimated to be around 1. Between 2007 and 2008 technical efficiency and technical progress are generally declined, compared to those of 2006 and 2007. Wilcoxon's rank-sum test shows that there are statistically significant difference of TCI and MPI between two periods at the level of 5%, while there are statistically significant difference of TECI, PECI and SECI between two periods at the level of 5%.

• Proceedings of the Korea Inteligent Information System Society Conference
• /
• 2000.11a
• /
• pp.427-436
• /
• 2000

The prediction of stock price index is a very difficult problem because of the complexity of the stock market data it data. It has been studied by a number of researchers since they strong1y affect other economic and financial parameters. The movement of stock price index has a series of change points due to the strategies of institutional investors. This study presents a two-stage forecasting model of stock price index using change-point detection and artificial neural networks. The basic concept of this proposed model is to obtain Intervals divided by change points, to identify them as change-point groups, and to use them in stock price index forecasting. First, the proposed model tries to detect successive change points in stock price index. Then, the model forecasts the change-point group with the backpropagation neural network (BPN). Fina1ly, the model forecasts the output with BPN. This study then examines the predictability of the integrated neural network model for stock price index forecasting using change-point detection.

• Journal of the Korea Convergence Society
• /
• v.5 no.4
• /
• pp.163-169
• /
• 2014

A stable neural network control scheme for unknown non-linear systems is developed in this paper. While the control variable is optimised to minimize the performance index, convergence of the index is guaranteed asymptotically stable by a Lyapnov control law. The optimization is achieved using a gradient descent searching algorithm and is consequently slow. A fast convergence algorithm using an adaptive learning rate is employed to speed up the convergence. Application of the stable control to a single input single output (SISO) non-linear system is simulated. The satisfactory control performance is obtained.

• Proceedings of the KIPE Conference
• /
• 2009.11a
• /
• pp.225-227
• /
• 2009

본 논문에서는 전압형 3상 ZSI(Z-source Inverter)의 입력전압과 커패시터 충전전압을 검출하고 ZSI의 기본 정의를 이용해 지령전압에 대한 변조지수(Modulation Index)를 결정하는 방법과 출력전압 제어가 가능한 변형된 SVM(공간벡터 변조방식)으로 구성된 알고리즘을 소개한다. 제안된 알고리즘은 ZSI의 이득과 변조지수의 정의를 이용한 간단한 방법으로 변조지수를 변화시켜 출력전압을 일정하게 유지하는 방법이다. PSIM을 통하여 타당성을 입증하였다.

• Journal of Korea Trade
• /
• v.27 no.5
• /
• pp.113-136
• /
• 2023

Purpose - Global production chains and their impacts on economic growth have drawn extensive attention from researchers. Close relationships among global production chains, export and economic growth have been illuminated, as evidenced by the fast and stable economic growth of East Asian economies. These economies perform various roles within global production chains using offshoring, in which the impact of import on domestic gross output is as strong as that of export. The impact of import on economic growth would depend on whether imported inputs substitute or complement domestic inputs production, which is likely to vary according to individual countries' functions within global production chains. The economic growth of concerned countries would also be diverse. However, little attention has been paid to the impact brought by imports compared to its significance. Design/methodology - The principal methodology used in this paper is structural decomposition analysis (SDA), widely chosen to elucidate the impact of various factors on domestic gross output using input-output tables. This paper extracts trade data of six Asian economies from the World Input-Output Database (WIOD) 2016 release that covers 43 countries for the period 2000-2014. The extracted data is then categorised into 37 sectors. First, this paper calculates the Feenstra-Hanson Offshoring Index (OSI) of each country. It then applies SDA to measure the changes in each economy's gross output, export, import input coefficients, and domestic input coefficients. Finally, after taking the first difference from pooled time-series data, it estimates the correlations between imported input coefficients and OSI using the ordinary least square (OLS) method. Findings - The main findings of this paper can be summarised as follows. Firstly, all six countries have increasingly engaged in global production chains, as evidenced by the growing size of OSI. Secondly, there are negative correlations in five countries except Japan, with sectoral differences. Thirdly, changes in import input coefficients are not negative in all six countries, indicating that offshoring does not necessarily substitute for domestic inputs production but does complement it and, therefore, fosters their economic growth. This is observed in China, Indonesia, Korea and Taiwan. Offshoring has led to an increase in the use of imported inputs, which has, in turn, stimulated domestic inputs production in these countries. Originality/value - While existing studies focus on the role of export in evaluating the impact of participating global production chains, this paper explicitly examines the unexplored impact of import on domestic gross output by considering both the substitution and the complementary effect, using the WIOD. The findings of this paper suggest that Asian economies have achieved fast and stable economic growth not only through successful export management but also through effective import management within global production chains. This paper recommends that the Korean government and enterprises carefully choose offshoring strategies to minimise disruption to domestic production chains or foster them.

• Environmental and Resource Economics Review
• /
• v.15 no.3
• /
• pp.425-450
• /
• 2006

The index of energy intensity(energy/GDP) has been a primary policy concern since it can clarify industry sectors which use energy intensively and generate $CO_2$ emission heavily. Although energy intensity index may be suitable for estimating $CO_2$ emission from an isolated industry sector, we need an index for induced $CO_2$ emission since industrial activities are interconnected in terms of input and output. By employing Environmental Input-Output Table 2000, this paper analyses the flow of energy demand and pollutants after first estimating an induced $CO_2$ emissions from various industrial sectors and economic activities. The paper reports higher induced $CO_2$ emissions from industry sectors with larger energy intensity since they produces goods or services retaining relatively considerable environmental load. Furthermore, it is shown that environmental load and $CO_2$ emissions in overall economy are likely increasing when the products of energy intensive industrial sector is used as inputs for less intensive sectors' production process. The result suggests we need consistent policy efforts to reduce energy intensity to lower $CO_2$ emissions.

• Journal of Sensor Science and Technology
• /
• v.32 no.4
• /
• pp.223-231
• /
• 2023

An integrated-optical biochemical sensor structure that can perform homogeneous and surface sensing using a 2×2 balanced-bridge Mach-Zehnder interference structure based on the optimized SOI slot optical waveguide was described, and its performance and characteristics were evaluated. Equations for the two output optical powers were derived and examined using the transfer matrices of a 3-dB coupler and phase shifter (channel waveguide). The length of the 3-dB coupler was determined such that the two output optical powers were same using these formulas. In homogeneous sensing, the effect of the refractive index of an analyte in the range of 1.33-1.36 on the two output optical power distributions was numerically derived, and the sensitivity was calculated based on each output and the difference between the two outputs, the former and the latter being 7.5796-19.0305 [au/RIU] and 15.2601-38.1351 [au/RIU], respectively. In the case of surface sensing, the sensitivity range of the refractive index of 1.337 based on each of the two outputs was calculated as -2.2490--3.5854 [au/RIU] and 1.2194-3.8012 [au/RIU], and the sensitivity range of 4.8048-7.0694 [au/RIU] was confirmed based on the difference between the two outputs.