• 제목/요약/키워드: Output Energy

검색결과 2,824건 처리시간 0.033초

CDS센서를 이용한 이동 가능형 태양추적시스템 설계 (Design of movable Tracking System using CDS Type Sensor)

  • 심명규;지언호;전순용
    • 전자공학회논문지SC
    • /
    • 제47권6호
    • /
    • pp.6-11
    • /
    • 2010
  • 태양광발전은 발전 셀의 특성상 태양광의 일사량에 따라 발전량이 달라지며, 태양과 셀 단면이 이루는 각도에 의하여 발전량에 차이를 가져온다. 일사량은 경도와 위도로 분류되는 지구표면의 위치와 계절에 의하여 결정되는 반면, 태양과 발전 셀의 단면이 이루는 각도는 고정된 위치에서 태양광발전 장치의 각도를 가변함으로서 변경가능하다. 실용적인 발전효율 향상 방안으로 태양광 발전 장치의 각도 조절방법이 많이 사용되며, 이를 위한 태양추적장치에 대한 연구가 활발하다. 본 연구에서는 태양광발전 효율향상을 위한 태양추적시스템에 관한 연구를 진행하였다. 본 연구의 태양추적시스템은 광도전효과(Photo conductive effect)를 이용한 반도체 포토센서를 이용하여 태양의 위치확인을 위한 센서부를 구성하였으며, 센서의 출력신호를 마이크로프로세서를 이용하여 해석하고, 태양을 추적하기위한 구동부 제어신호를 발생시켰다. 태양추적시스템의 성능분석을 위한 태양발전장치(10W)를 제작하였으며, 실험을 통하여 연구에서 설계및제작된 태양추적장치의 유용성을 확인하였다.

3상 4선식 전력계통에서 전압제어 방식의 역률보상시스템 (Power Factor Compensation System based on Voltage-controlled Method for 3-phase 4-wire Power System)

  • 박철우;이현우;박영균;정상현
    • 전자공학회논문지
    • /
    • 제54권8호
    • /
    • pp.107-114
    • /
    • 2017
  • 본 논문에서는 3상 4선식 전력계통에서 새로운 전압제어 방식의 역률보상시스템을 제안한다. 제안하는 전압제어 방식의 역률보상시스템은 슬라이닥을 이용하여 가변되는 출력전압을 커패시터에 인가하는 것으로 보상에 필요한 무효전력을 생성한다. 기존의 커패시터 뱅크 방법을 이용하는 역률보상시스템은 선택 가능한 커패시터 용량이 한정되어 있어 부하 상황에 따라 역률보상 오차가 발생하지만, 제안 시스템은 변화하는 부하를 추종하여 오차 없이 역률을 100%까지 보상할 수 있다. 본 논문에서는 3상 4선식 전력계통에서 전압제어 방식의 역률보상시스템과 제어 알고리즘을 개발하였고 모의실험과 실험을 통해 성능을 확인한다. 제안 시스템을 수용가에 설치할 경우 역률 개선을 통한 전기료 감소, 선로손실 감소, 부하 용량 증대 효과가 기대된다. 특히 발전 사업가 측에서는 역률 보상 성능의 향상으로 송전 여유 용량 확보와 발전량 절감이 가능하다.

전자소자에서의 $\frac {1}{f}$잡음에 관한 연구 (A Study on the Theory of $\frac {1}{f}$ Noise in Electronic Devies)

  • 송명호
    • 한국통신학회논문지
    • /
    • 제3권1호
    • /
    • pp.18-25
    • /
    • 1978
  • 반도체 소자에서 생기는 1/f 형의 잡음의 근원이 무엇인가에 대해 지금까지 여러 이론이 나왔다. 그중에도 Mcwhorter's Surface model이 대표적인 이론이었다. 그러나 Hooge는 이론에 반기를 들고 나왔다. Hooge의 이론에 의하면 thermo cell이나 Concentration cell에서의 1/f-형의 잡음이 표면효과(surface effect)가 아니라는 것이다. 본 논문에서는 이 두 대표적인 이론을 종합검토할 수 있는 Langenvin type의 Boltzmann transport equation에 입각하여 새로운 일반이론을 세웠다. 본 논문에서는 N형 채널을 갖고 있는 금속산화물반도체 전계효과 트랜지스터에서 단일준의 Shockley-Read-Hall recombination center에 의한 단락회로에서 드레인의 1/f-형 잡음스펙트럼을 계산하기 위해 시간에 따라 변화하는 양을 포함시키므로써 각 에너지대의 케리어에 대해 준-페르미준위를 정의할 수 없다고 가정했으므로, 1/f-형의 잡음은 다수케리어 효과에 기인한다고 가정했다. 이러한 가정하에서 유도된 1/f-형의 잡음은 금속산화물반도체 전계효과 트랜지스터에서 1/f-형의 잡음에 중요한 요인들을 모두 보여주었다. : 적주파에서 플렛티유를 나타내지 않았고 채널의 면적 A와 드레인 바이어스 전압 V에 비례하고 체널의 길이 L에 반비례한다. 본 논문의 모델에서는 1/f-응답에서 1/f2에 대한 잡음스트럼의 전이주파수와 P-n 합다이오우드의 surfact center에 관계되는 완화시간(relaxation time)에 대응하는 주파수 사이를 구별하여 설명할 수 있었다. 본 논문의 결과에서 1/f-형 잡음스펙트럼은 격자산란이 주원인이 된다. 금속산화물반도체 전계효과 트랜지스터를 살펴보면 격자산란이 주로 표면에서 일어나기 때문에 1/f-형 잡음이 표면효과라고 말할 수 있다.

  • PDF

아연공기전지용 Pr1-x (Sr, Ca)xCoO3 양극촉매 제조 및 전기화학적 특성 (Preparation and Electrochemical Properties of Pr1-x (Sr, Ca)xCoO3 Cathode Materials for Zinc Air Batteries)

  • 허상훈;엄승욱;김현수
    • 전기화학회지
    • /
    • 제12권4호
    • /
    • pp.342-348
    • /
    • 2009
  • 아연공기이차전지는 고에너지밀도형이고 환경친화적이며 낮은 제조단가와 수용액계의 전해질 사용으로 다른 종류의 전지에 비해 매우 안전한 특성을 가진다. 하지만, 고출력 방전에 취약한 단점이 있으며 수용액에서 산소발생 및 환원반응은 매우 높은 과전압 하에서 일어나 전지효율의 감소 및 수명단축의 결과를 가져온다. 따라서 충 방전이 개시되면서 초기 OCV로부터 전압강하를 최소화 시키는 것이 성능 개선의 관건인데 이는 고성능의 촉매개발로 해결해야 한다. 본 연구에서는구연산법을 이용하여 $Pr_{1-x}(Sr,\;Ca)_x\;CoO_3$분말을 합성하고 각 분말들의 물성을 XRD, SEM, TGA 등을 이용하여 측정하고, 이를 이용한 양극의 환원 및 산화분극과 순환전압전류 등의 전기 화학적 특성을 평가하여 기존에 연구했던 $La_{1-x}Sr_xCoO_3$, $La_{1-x}CaxCoO_3$ 등의 촉매 성능보다 향상된 결과를 얻을 수있었다.

원자력 추진 잠수함의 특성과 농축우라늄 사용 (The characteristics of nuclear powered submarine and the use of enriched uranium)

  • 장준섭
    • Strategy21
    • /
    • 통권41호
    • /
    • pp.261-293
    • /
    • 2017
  • Nuclear power is a way of attaining an enormous amount of energy with relatively small amount of resources and after it has been introduced to the submarine since 1954, there are approximately 150 of nuclear powered submarine currently on a mission around the world. This is due to the maneuverability, mountability and covertness of nuclear submarines. However, there are other tasks, not only the high level of nuclear technology that are needed to be dealt with in order to construct nuclear powered submarine. The biggest task of all is to secure the enriched uranium. Accordingly, this research is about the way of enriching and securing the nuclear fuel that are used in the nuclear submarine with the characteristics, merits and demerits of the nuclear submarine. Due to the fact that the pressurized water reactor in South Korea is the reactor that was originally built for the development of nuclear powered submarine, many parts is designed to be suitable for the submarine propulsion. However, in order to apply this to submarine it is needed to consider additional requests such as the position of reactor, accident-coping system, radioactive covering, reactor output adjustment and ship's pitch and roll in order to apply this to submarine. Nuclear submarines have much higher speed based on the powerful propulsion in comparison with diesel-electric submarine and also have bigger loading area. Besides, there is no need to snorkel and they also have advantages in covertness with the multi-noise proof system. The nuclear technology in South Korea has seen the dramatic development since 1962 and in 1998 reached to the level that we have succeeded in the localization of nuclear plant and exported the world-class one-piece small-sized reactor (SMART) to UAE. To operate these reactors, we import the whole quantity of low-enriched uranium and having our own uranium enrich facility is not probable because of the budget and international regulations. With the ROK/US nuclear agreement revised on 2015 November, the enrichment of uranium that are available without special permission has changed up to 20%. According to the assumption that we use the 20% enrichment of Uranium on U.S. virginia class submarine, it is necessary to change the fuel after 11 years and it will cause additional cost of 1 billion dollars. But the replace period by the uranium's enrichment rate is not fixed so that it is possible to change according to the design of reactor. Therefore, I would like to make a suggestion on two types of design concepts of nuclear submarine that can be operated for 30 years without nuclear fuel change by using the 20% enriched uranium from ONNp.First of all, it is possible by increasing the size of reactor by 3 times and it results in the 1,000t increase of the weight. And secondly, it is by designing the one piece reactor to insert devices such as steam turbine, condenser into the inside of nuclear core like the Rubis class submarines of France.

각막 내피 세포 영상내 육각형 경계의 검출과 보완법 (Extraction and Complement of Hexagonal Borders in Corneal Endothelial Cell Images)

  • 김응규
    • 전자공학회논문지
    • /
    • 제50권3호
    • /
    • pp.102-112
    • /
    • 2013
  • 본 연구에서는 저 명암 대비 영상에서 잡음이 많은 육각형을 포함하는 윤곽 검출과 보완의 2단계 처리방법을 제안한다. 이 방법은 라플라시안-가우시안 필터(LGF)의 조합과 형상에 의존하는 필터의 아이디어에 기초한다. 먼저, 1단계에서는 모서리에서 특히 육각형상의 에지를 검출하기 위한 검출기로서 6개의 마스크를 갖는 알고리즘을 사용한다. 여기에서 두 개의 삼각화살 모양의 필터는 육각형의 삼각화살 모양의 접속부를 검출하기 위해 사용되고, 기타 네 개의 필터는 육각형 주변의 에지를 검출하기 위해 사용된다. 자연영상으로서 보통 규칙적인 육각형상의 각막 내피 세포를 선택하며, 이 각막 내피 세포의 형상을 자동적으로 계측하는 것은 임상진단에 있어서 중요하다. 그 유효성을 평가하기 위해 제안 방법과 기존 방법을 잡음을 포함하는 육각형 영상에 적용한다. 그 결과, 제안 알고리즘이 기존의 다른 방법에 비해 잡음에 대한 강인성과 출력 신호 대 잡음비, 에지 일치율 및 검출 정확도의 면에서 보다 양호한 검출률을 나타냈다. 다음으로, 2단계에서는 에너지 최소화 알고리즘에 의한 세선화 영상의 결손 부분을 보완한 후 임상진단에 필요한 정보를 제공하는 세포의 면적과 분포를 계산한다.

Dynamic Control Allocation for Shaping Spacecraft Attitude Control Command

  • Choi, Yoon-Hyuk;Bang, Hyo-Choong
    • International Journal of Aeronautical and Space Sciences
    • /
    • 제8권1호
    • /
    • pp.10-20
    • /
    • 2007
  • For spacecraft attitude control, reaction wheel (RW) steering laws with more than three wheels for three-axis attitude control can be derived by using a control allocation (CA) approach.1-2 The CA technique deals with a problem of distributing a given control demand to available sets of actuators.3-4 There are many references for CA with applications to aerospace systems. For spacecraft, the control torque command for three body-fixed reference frames can be constructed by a combination of multiple wheels, usually four-wheel pyramid sets. Multi-wheel configurations can be exploited to satisfy a body-axis control torque requirement while satisfying objectives such as minimum control energy.1-2 In general, the reaction wheel steering laws determine required torque command for each wheel in the form of matrix pseudo-inverse. In general, the attitude control command is generated in the form of a feedback control. The spacecraft body angular rate measured by gyros is used to estimate angular displacement also.⁵ Combination of the body angular rate and attitude parameters such as quaternion and MRPs(Modified Rodrigues Parameters) is typically used in synthesizing the control command which should be produced by RWs.¹ The attitude sensor signals are usually corrupted by noise; gyros tend to contain errors such as drift and random noise. The attitude determination system can estimate such errors, and provide best true signals for feedback control.⁶ Even if the attitude determination system, for instance, sophisticated algorithm such as the EKF(Extended Kalman Filter) algorithm⁶, can eliminate the errors efficiently, it is quite probable that the control command still contains noise sources. The noise and/or other high frequency components in the control command would cause the wheel speed to change in an undesirable manner. The closed-loop system, governed by the feedback control law, is also directly affected by the noise due to imperfect sensor characteristics. The noise components in the sensor signal should be mitigated so that the control command is isolated from the noise effect. This can be done by adding a filter to the sensor output or preventing rapid change in the control command. Dynamic control allocation(DCA), recently studied by Härkegård, is to distribute the control command in the sense of dynamics⁴: the allocation is made over a certain time interval, not a fixed time instant. The dynamic behavior of the control command is taken into account in the course of distributing the control command. Not only the control command requirement, but also variation of the control command over a sampling interval is included in the performance criterion to be optimized. The result is a control command in the form of a finite difference equation over the given time interval.⁴ It results in a filter dynamics by taking the previous control command into account for the synthesis of current control command. Stability of the proposed dynamic control allocation (CA) approach was proved to ensure the control command is bounded at the steady-state. In this study, we extended the results presented in Ref. 4 by adding a two-step dynamic CA term in deriving the control allocation law. Also, the strict equality constraint, between the virtual and actual control inputs, is relaxed in order to construct control command with a smooth profile. The proposed DCA technique is applied to a spacecraft attitude control problem. The sensor noise and/or irregular signals, which are existent in most of spacecraft attitude sensors, can be handled effectively by the proposed approach.

디젤엔진에 있어서 연료의 성분이 아산화질소 배출에 미치는 영향 (Effect of fuel component on nitrous oxide emission characteristics in diesel engine)

  • 유동훈
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제38권9호
    • /
    • pp.1045-1050
    • /
    • 2014
  • 아산화질소($N_2O$, Nitrous Oxide)는 이산화탄소($CO_2$, Carbon Oxide), 메탄($CH_4$, Metane)이어 세 번째로 지구온난화에 기여하는 물질로 알려져 있다. $N_2O$의 지구온난화 계수는 대기 중에서 안정하고, 성층권에서 광분해 된 후 이차적인 오염의 원인이 되기 때문에 $CO_2$의 310배에 이른다. $N_2O$의 생성에 대한 조사는 보일러와 같은 연속적인 연소를 갖는 동력원에 대하여 몇몇의 연구자들에 의한 보고가 있었다. 하지만, 디젤엔진에 있어서 연료의 성분이 $N_2O$ 배출에 미치는 영향에 대한 조사는 실시되어지지 않은 상태이다. 그러므로 본 연구에서는 디젤엔진에서 연료 중에 질소와 황 농도에 의해 변화되는 $N_2O$ 배출율에 대하여 조사하였다. 실험에 사용한 엔진은 12kW/2400rpm의 4행정 직접분사식 디젤엔진이고, 실험엔진의 운전조건은 75% 부하에서 이루어졌다. 연료 중의 질소와 황 농도는 Pyridine, Indole, Quinoline, Pyrrol, Propionitrile, Di-tert-butyl-disulfide의 6 종류 첨가제를 사용하여 증가시켰다. 결과에 의하면, 질소성분 0.3% 이하를 갖는 디젤연료는 첨가제의 종류와 농도와 관계없이 $N_2O$ 배출률에 영향을 미치지 않았다. 하지만, 연료 중 황 첨가제의 증가는 배기가스 중의 $N_2O$ 농도를 증가시켰다.

당뇨병성 궤양에 사용되는 레이저의 특성에 대한 연구 (Review of the Properties of the Laser and the Spectrum of Laser Instruments for Diabetic Ulcer)

  • 강기완;강자연;정민정;김홍준;서형식;장인수
    • 한방안이비인후피부과학회지
    • /
    • 제29권4호
    • /
    • pp.14-23
    • /
    • 2016
  • Objectives : One of major complications of diabetes, diabetic ulcer is also one of the main reasons for amputation, and the prevalence rate is 4-10%. Laser therapy is widely used for leg ulcer and diabetic ulcer, and it is known to improve wound epithelialization, cellular content, and collagen deposition. The purpose of this study is to investigate the properties of the laser and the spectrum of laser instruments for diabetic ulcer. Methods : We performed literature search using the PubMed, Cochrane, CINAHL and Web of science for the data in English. In addition, other databases were checked for different languages such as OASIS and NDSL for the literature in Korean, CNKI in Chinese, and CiNii and J-STAGE written in Japanese. We excluded all review article and experimental studies, and only clinical studies using laser or light emitting diode (LED) for diabetic ulcer were selected. Results : A total twenty papers were selected. Different light sources were used as follows: LED, HeNe, InGaAlP, GaAlAs, GaAs, CO2, and KTP. The number of LED studies was 9, and HeNe laser was 7, and InGaAlP and GaAlAs laser was 2, GaAs, CO2, and KTP laser was 1 for each. Various energy density of the clinical study were reported. Conclusions : It is suggested that to select appropriate laser type and give the adequate output power to treat diabetic ulcer. Further evaluation and research for the condition of laser therapy to treat diabetic ulcers are warranted.

Directions towards sustainable agricultural systems in Korea

  • Kim, Chang-Gil
    • 한국작물학회:학술대회논문집
    • /
    • 한국작물학회 2017년도 9th Asian Crop Science Association conference
    • /
    • pp.3-3
    • /
    • 2017
  • The question of how to establish sustainable agricultural systems has become as prominent as questions related to water, energy and climate change. High input/high output agriculture has brought with it many adverse effects; the massive deterioration of soil and water in both quantity and quality, increased greenhouse gas emissions and an increased prevalence of unsafe foods. Additionally, urbanization and climate change has worsened the shortage of farmland and reduced the supply of agricultural water. Given these challenges, maintaining, conserving and efficiently using agri-environmental resources, through fostering of sustainable agriculture, have emerged as key tasks in solving these problems. What is needed therefore is research, based on systematic and comprehensive empirical analyses, that can propose plans and methods for establishing an appropriate sustainable agricultural system. The empirical analysis of sustainable agricultural system is approached separately from economic, environmental and social aspects. An analysis of environment effect reveals that the available phosphate level is 1.3~2.1 times greater than the optimal amount in rice paddies, upland fields and orchards. Further examination has revealed that the excess nutrient is polluting both ground water and surface water. Analytical results for economic feasibility show that factors of production have been invested heavily in the rice crop. Under these conditions, sustainable agriculture, including low-input agriculture, appears to be a possible alternative that will facilitate simultaneous improvements in both economic feasibility and environment effects. Analysis results for sociality reveal that social factors include the value of producer, association and interior networks. Social conditions are comprised of leadership, consumers' awareness, education and conflict solutions. In addition, analysis as to the degree investments contribute to improving agricultural value added has revealed that the direct payment program is the most effective instrument. Experts confirm that economic feasibility can be improved by scientific and well-reasoned nutrient management on the basis of soil testing. Farmers pointed to 'economic factors' as being the largest obstacle to switching to the practice of sustainable agriculture. They also indicate 'uncertainty with regards to sustainable agriculture technology' as an impediment to practicing sustainable agriculture. Even so, farmers who believe environmental and regional issues to be the most pressing problems have expanded their practice of sustainable agriculture. The keys to establishing sustainable agriculture system are classified into the following four aspects. Firstly, from an economic aspect, the research indicates that agricultural policy needs to be integrated with environmental policy and that the function of market making based on the value chain needs to be revitalized. Secondly, from an environmental aspect, there is a need for an optimal resource management system to be established in the agricultural sector. In addition, sustainable agriculture practice will need to be extended with attendant environmentally-friendly and sustainable intensive technology also requiring further development. Thirdly, from a social aspect, green agriculture management needs to be fostered, technology and education extended, and social conflict mediated. Lastly, from a governance aspect, it will be necessary to strengthen good governance, assign and share suitable roles and responsibilities, build a cooperation system and utilize community supported agriculture.

  • PDF