• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.8
• /
• pp.844-853
• /
• 2008

This paper describes the design of a FEM(Front End Module) having power detection function for mobile handset application. The designed FEM consists of a MMIC(Monolithic Microwave Integrated Circuits) power amplifier chip, SAW Tx filter and duplexer, diode power detector and stripline matching circuit. An LTCC(Low Temperature Co-fired Ceramics) technology is adopted for miniaturized FEM. The frequency band is $824{\sim}869$ MHz which is the uplink Tx band of the CDMA mobile system. The size of designed FEM is $7.0{\times}5.5{\times}1.5\;mm^3$, which is an ultra-small size even though the power detector circuit is included. All sub-components of FEM have been developed and measured in advance before being integrated into FEM. The measured output power and gain are 27 dBm and 27 dB, respectively. In addition, the measured ACPR characteristics are 46.59 dBc and 55.5 dBc at 885 kHz and 1.98 MHz offset, respectively.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.31 no.5D
• /
• pp.697-703
• /
• 2011

Studies have shown that research and development has positively impacted the upbringing of construction industry. However, its economic effect has not yet been fully investigated. This study develops an economic effect analysis model for R&D performance. In-depth interview and review of the literature produced a total of 11 performance indicators that considered the public characteristics of construction industry. A case study which involved the Expressway & Transportation Research Institute was conducted in order to verify the proposed model. The result showed that the return on investment of the institute was 3.3 times of the R&D investment. The proposed model is expected to help researchers analyze an economic effect analysis model for R&D performance.

• Progress in Medical Physics
• /
• v.16 no.3
• /
• pp.111-115
• /
• 2005

We have designed the multi channel detector for the quality assurance of clinical photon beams. The detector was composed of solid phantom inserted by six plane-parallel ionization chambers at different depth. The chamber as a mini plane parallel chamber was made of carbon coated microfilms. In this study the electrical characteristics of the six chambers in the solid phantom were evaluated using 6 MV photon beam. The leakage currents were less than 0.5 pA, reproducibility was less than 0.5$\%$, linearity was less than 0.5$\%$, and dose rate effect was less than 0.7$\%$. In addition the effect of dose variation from other chambers was estimated to maximum 0.8$\%$ approximately. The developed detector can be used for quality determination in output dosimetry or measurement of percentage depth dose approximately for clinical photon beam.

• Journal of Distribution Science
• /
• v.13 no.4
• /
• pp.45-53
• /
• 2015

Purpose - Online shopping enables consumers to conveniently purchase products irrespective of the time and place. As a result, several online shopping companies have emerged to cater to this growing market and, therefore, the competition among them has become increasingly intense. This paper evaluates the comparative efficiency of online shopping companies for a multi-year period (2009-2013), in order to help online shopping managers identify major drivers for enhancing management efficiency and the subsequent competitiveness. Research design, data, and methodology - The researchers collected the data from 2009 to 2013 from the distribution yearbook. This paper analyzes the marketability (sales figures), profitability (business profits), and management conditions (net profits) of domestic online shopping enterprises by incorporating information on human resources (number of employees) and material resources (total assets and capital). Therefore, the number of employees, total assets, and capital are selected as input variables, and sales figures, business profits, and net profits as the output variables. In this study, Data Envelopment Analysis (DEA) was used to measure the comparative efficiency of domestic online shopping companies. In addition, the Malmquist Productivity Index was used to evaluate the trend of change of Decision Making Units' (DMUs') efficiency for a multi-year period. Results - First, as of 2013, Interpark (2.415) was found to be the most efficient online shopping enterprise, followed by Aladdin Communications (2.117), Hyundai Home shopping (1.867), Home&Shopping (1.176), NS Home shopping (1.170), Commerce Planet (1.126), CJ O Shopping (1.105), Ebay Korea (1.088), and GS Home Shopping (1.051). Second, this study recognizes how the management efficiency has changed for the period 2009-2013. Third, the lesser the capital and employees, the more are the net profits, and the better is the management efficiency of domestic online shopping companies. Lastly, the productivity of such companies is influenced by endogenous factors rather than exogenous factors such as shifts in business environment and technological advances. Conclusions - DHC Korea influenced various distribution channels to reach customers through the Internet. Consequently, this helped in increasing the awareness about its products, in addition to an increase in sales. These achievements can be attributed to the characteristics of online shopping companies. Although it is easy for these companies to suggest goods for one-off purchases, they however have difficulties in retaining customers. Overcoming this challenge can be one of the ways to benchmark a successful case of an efficient company. For example, an online shopping company can attract customers by developing a corresponding mobile application as a convenient way to shop online. Additionally, they can satisfy customers by quick delivery of purchased products, which is possible by building an effective logistics network. Our study indicates that the productivity of an online shopping company was influenced by endogenous factors driven by improvements in managerial practices rather than exogenous factors. Accordingly, online shopping companies should adopt strategies to improve their operational efficiency rather than sales volume-oriented management.

• Journal of the Korea Organic Resources Recycling Association
• /
• v.12 no.2
• /
• pp.110-120
• /
• 2004

This research sought to analyze the food waste collection and transportation system in Korea's related public resource-making facilities, address related problems, and suggest a reasonable alternative measure. For the food waste sorting-out and discharging methods, apartments and similar housings use containers, and individual-style housings use 'quantity-proportional' bags. The sorting and discharging methods should be improved to boost the reuse of resource-made output. The analysis of collection and transportation costs by local governments indicates that they range from 30,000 won to 150,000 won per ton, varying greatly by characteristics of local governments, thus suggesting a need to establish costs calculation criteria to justify the costs. Charges imposed to each household were not greatly problematic in the case of quantity-proportional bags; however, in the case of apartments and similar housings, charges varied greatly, suggesting a need to impose differentiated charges calculated on the basis of collection and transportation costs according to regions. Many places used household-garbage collection vehicles to collect food waste, raising the possibility of causing complaints on leaching water and bad odors. Thus, exclusive food waste collection vehicles should be gradually introduced. Also, in certain places, vehicles should travel more than 20km to collect food waste, and in such cases, a cargo transferring system should be introduced to boost efficiency in carriage.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.567-573
• /
• 2020

This study was done to develop indicators for cities that can be used in the long term and in a sustainable manner. Activation indicators were developed to improve the resilience in the downtown area of Seo-gu, Incheon. Preliminary indicators were derived from prior studies on similar indicators of resilience for urban regeneration, and an expert opinion survey was conducted to analyze the suitability and importance of the indicators. Activation indicators were established for improving urban resilience in six areas: population stability, social inclusion, industrial diversity, local productivity, environmental sustainability, and social-based convenience. From 60 preliminary indicators, 42 indicators were selected through the expert opinion surveys for securing an economically active population, establishing a living infrastructure, improving the settlement environment, and upgrading industry to reflect the characteristics of the West, including industrial complexes. It was found that diversification is necessary. Further study is still necessary to improve the objectivity of the indicators and calculate a resilience index. The significance of this study is that it looks at quantitative indicators, complements other studies on regional decline diagnosis, and presents realistic alternatives suitable for domestic situations based on the concept of resilience.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.291-298
• /
• 2020

The power generation of a PV system changes according to the weather variables, such as solar radiation and temperature. In particular, the output characteristics of photovoltaic systems, which are sensitive to changes in solar radiation, can be produced effectively and reliably in various weather conditions through MPPT (Maximum Power Point Tracking) control. This paper proposes a fuzzy-based MPPT control method to improve the efficiency and stability of the power production from a solar system. To verify the performance of the proposed method, under the same weather environment, the efficiency and stability of the newly proposed fuzzy logic were compared and evaluated empirically with P&O (Perturb and Observe), a representative algorithm of MPPT control. Furthermore, the circuits designed to improve the reliability and reliability of the hardware were manufactured from Printed Circuit Boards (PCB) to conduct experiments. Based on the results of the experiment during a certain period, the fuzzy-based MPPT proposed in this paper improved the efficiency by more than 4.4% compared to the MPPT based on the existing P&O algorithm and decreased the fluctuation width by more than 39.7% at the maximum power point.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.10
• /
• pp.1-7
• /
• 2020

In recent years, as LED display systems are actively spread, study on effective control methods for an LED driver for driving the systems has been in progress. The most representative among them is the uniform brightness control method for the LED driver channel. In this paper, we propose an LED driver IC for BLU with current compensation and system protection functions to minimize channel luminance deviation. It is designed for current accuracy within ±3% between channels and a channel current of 150 mA. In order to satisfy the design specifications, the channel amplifier offset was canceled out by a chopping operation using a channel-driving PWM signal. Also, a pre-charge function was implemented to minimize the fast operation speed and luminance deviation between channels. LED error (open, short), switch TR short detection, and operating temperature protection circuits were designed to protect the IC and BLU systems. The proposed IC was fabricated using a Magnachip 0.35-um CMOS process and verified using Cadence and Synopsys' Design Tool. The fabricated LED driver IC has current accuracy within ±1.5% between channels and 150-mA channel output characteristics. The error detection circuits were verified by a test board.

• The KIPS Transactions:PartD
• /
• v.18D no.6
• /
• pp.501-508
• /
• 2011

A knowledge map, which has been recently applied in various fields, is discovering characteristics hidden in a large amount of information and showing a tangible output to understand the meaning of the discovery. In this paper, we suggested a knowledge map for research trend analysis based on keyword-relation networks which are constructed by using a database of the domestic journal articles in the computer engineering field from 2000 through 2010. From that knowledge map, we could infer influential changes of a research topic related a specific keyword through examining the change of sizes of the connected components to which the keyword belongs in the keyword-relation networks. In addition, we observed that the size of the largest connected component in the keyword-relation networks is relatively small and groups of high-similarity keyword pairs are clustered in them by comparison with the random networks. This implies that the research field corresponding to the largest connected component is not so huge and many small-scale topics included in it are highly clustered and loosely-connected to each other. our proposed knowledge map can be considered as a approach for the research trend analysis while it is impossible to obtain those results by conventional approaches such as analyzing the frequency of an individual keyword.

• Journal of Information Management
• /
• v.31 no.1
• /
• pp.12-42
• /
• 2000

Digital library research has attracted much attention. While many research projects are funded by government agencies and national and international bodies, some are run by specific academic and research institutions and libraries. While some digital library projects, such as the ELINOR project in the UK, the first two phases of the eLib(Electronic Libraries) programme in the UK, and the first phase of the DLI(Digital Library Initiative) in the USA, are now over, a number of other projects are currently under-way in different parts of the world. Beginning with the definitions and characteristics of digital libraries proposed by various researchers, this paper provides brief accounts of some major digital library projects that are currently in progress, or are just completed, in different parts of the world. There follows a review of digital library research under 16 major headings. Literature for this review has been identified through a search on the LISA CD-ROM database and a Dialog search on library and information science databases, and the resulting output has been supplemented by a scan of the various issues of D-Lib Magazine and Ariadne, and the Web sites of various organizations and institutions engaged in digital library research. The review indicates that we have learned a lot through digital library research within a short span of time. However, a number of issues are yet to be resolved. The paper ends with an indication of the research issues that need to be addressed and resolved in the near future in order to bring the digital library from the researcher's laboratory to the real life environment.