• 제목/요약/키워드: Outer Zone

검색결과 227건 처리시간 0.028초

미국남동부 대륙주변부의 기원 : 화산성 혹은 비화산성? (The Origin of the Southeastern United States Continental Margin: Is it Volcanic or Non-Volcanic?)

  • 오진용
    • 자원환경지질
    • /
    • 제27권6호
    • /
    • pp.571-577
    • /
    • 1994
  • 미국 대서양 대륙주변부는 북미와 아프리카 대륙의 중생대 분열의 산물로서 화산성 기원 혹은 비화산성 기원인가에 대해 논란이 있어 왔다. 이를 규명하기 위하여 미국 남동부 해안에서 채취한 다채널 탄성파 단면도에 나타난 기반암들의 영상을 조사하였다. 가장 핵심적인 탄성파 영상의 하나는 전체적으로 쐐기 형상을 보이는 해양방향의 경사반사층들(seaward-dipping reflectors; SDR)이다. 이들은 화산성 열개주변부의 상징적인 기반암 구조로 알려져 있다. 연구지역에는 2 개조의 해양경사층 쐐기구조가 존재하였다: 하나는 기반암 경첩대 (basement hinge zone) 부근이고 ('the hinge SDR wedge'라고 명명), 다른 하나는 미국 동해안 자기이상대 (the East Coast magnetic anomaly)의 바다 쪽에 위치한다 ('the outer SDR wedge'라고 명명). 또한, 기반암 경첩대의 동쪽 지각에서는 "7.2 km/s 층"으로 알려진 높은 속도의 하부지각층과 함께 원만한 기복의 모호 불연속면 등이 관찰되었다. 이러한 기반암 구조와 잘 알려진 화산성 기원의 대륙주변부의 지각구조를 비교해 보아 미국 남동부 대륙주변부를 화산성 기원의 대륙주변부로 특징지었다.

  • PDF

콘관입으로 인한 과압밀점토의 과잉간극수압의 분포 (Excess Pore Pressure Induced by Cone Penetration in OC Clay)

  • 김태준;김상인;이우진
    • 한국지반공학회논문집
    • /
    • 제22권11호
    • /
    • pp.75-87
    • /
    • 2006
  • 본 논문에서는 과압밀된 점토에서 피에조콘 관입으로 인한 과잉간극수압의 공간적인 분포를 알아내기 위한 대형 토조시험을 실시하고 분석결과를 제시하였다. 시험결과에 의하면 콘 주변의 전단영역에서 과잉간극수압은 콘 표면으로부터 전단영역의 경계까지 직선적으로 증가하며, 소성영역에서는 대수적으로 감소하여 소성영역 경계에서 영으로 접근하였다. 또한 전단영역의 크기는 콘 반경의 2.2-1.5배 정도이며 과압밀비 증가 시 전단영역의 크기는 감소하는 반면 소성영역의 크기는 과압밀비에 상관없이 콘 반경의 약 11배로 일정하였다. 본 연구에서는 변형률 속도와 응력이 방성 효과를 고려하여 MCC(Modified Cam Clay) 모델과 공동확장이론으로부터 피에조콘 위치에서의 과잉간극수압을 예측하였으며, 전단영역에서 ${\Delta}u_{shear}$의 선형증가와 전단 및 소성영역에서 ${\Delta}u_{oct}$의 대수적 감소를 가정하여 과잉간극수압의 공간적 분포를 예측하기 위한 방법을 제시하였다. 이러한 방법으로 예측된 간극수압의 분포는 대형 토조시험에서의 콘 관입시험 결과와 비교를 통해 검증되었다.

평관형 및 나선 그루브형 열사이폰 내부 작동유체의 포화온도와 단열부의 표면온도에 관한 연구 (A Comparison between the Internal Saturation Temperature of Working Fluid and the Surface Temperature of Adiabatic Zone of Two-Phase Closed Thermosyphons with Various Helical Grooves)

  • 한규일;조동현;박종운;이상진
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2004년도 춘계학술대회
    • /
    • pp.1243-1249
    • /
    • 2004
  • This study is focused on the comparison between the internal saturation temperature of the working fluid and the surface temperature of adiabatic zone of two-phase closed thermosyphons with various helical grooves. Distilled water, methanol and ethanol have been used as the working fluid. In the present work, a copper tube of the length of 1200mm and 14.28mm of inside diameter is used as the container of the thermosyphon. Each of the evaporator and the condenser section has a length of 550mm, while the remaining part of the thermosyphon tube is adiabatic section. A experimental study was carried out for analyzing the performances of having 50, 60, 70, 80, 90 helical grooves. A plain thermosyphon having the same inner and outer diameter as the grooved thermosyphons is also tested for the comparison. The results show that the numbers of grooves and the type of working fluids are very important factors for the operation of thermosyphons. A good agreement between the internal saturation temperature of working fluid and the surface temperature of adiabatic zone of two-phase closed thermosyphons with various helical grooves is obtained.

  • PDF

주거지 주변가로 Zone 30 구역 선정기준 및 운영방안 연구 (The Study on Choice Standard and Operation Method on Zone 30 in the Outskirts Street of Residential Area)

  • 심관보;고명수;조성근
    • 대한교통학회지
    • /
    • 제27권5호
    • /
    • pp.39-49
    • /
    • 2009
  • 본 연구는 현재의 보행자 보호구역 선정기준 문제점을 분석하여 현실에 맞는 기준 재정립에 관해 기술하였다. 구체적인 사항으로는 보행자 교통사고의 문제점에 대하여 통계자료를 기본으로 보행자 교통사고의 추이, 사고의 발생 유형, 행동유형 등을 종합적으로 분석하고 보행자 교통사고의 감소를 위한 대책으로 보행자 보호구역을 지정 운영하고 있는 국내 외의 사례를 활용하여 국내의 Zone30 구역 선정 기준을 도출하였다. 또한, 현장조사를 통해 교통량과 속도가 보행자 사고에 미치는 영향을 분석하여 정량적인 기준을 제시하였으며, 정량적 기준 외에 사고유형, 도로기능, 사고위치 등 보행자 교통사고 발생건수 등의 사고특성을 분석하여 기준을 제시하였다. 특히 교통사고의 통계자료를 활용하여 보행자 안전성에 역점을 두었다. 또한, Zone30 구역의 안전시설 설치에 관한 설치기준 및 운영방안의 체계적인 정립이 이루어지지 않아 각 지방 단위별로 일관성이 없고 혼란이 발생하여 Zone30 구역에 설치될 시설설치 표준지침 수립과 운영방안을 제시하였으며, Zone30 구역 교통운영별 시설물 배치도를 제시하여 설치기준을 제시하였다.

자동차 후면 유리 열선의 열전달특성에 따른 성애제거 성능평가 및 성능검증 방법에 관한 연구 (A Study on the Performance Test and Verification of Heat Transfer characteristics in Automobile Rear Window Heater)

  • 전환영;이찬규;배효준;이상재
    • 동력기계공학회지
    • /
    • 제9권2호
    • /
    • pp.73-80
    • /
    • 2005
  • Both theoretical and experimental investigations were conducted to analyze defrosting behavior of a window heater operating in the low outdoor temperature($-20^{\circ}C$). To achieve this purpose, first a warm-chamber experiment($23^{\circ}C$) was performed to measure inner and outer surface temperature of the rear window(heated by the electric heater supplying 195 W) as functions of both time and position. Secondly, a cold chamber experiment was made to continuously record defrosting process of the frosted window. From the comparisons of the two experimental results, it was found that there was a similarity between the spatial distributions of both temperature and remaining frost. Thus, the temperature data from the warm-chamber experiments can be utilized to predict an expected zone covered with remaining frosts, and this approach can also be adopted in the inspection process in order to economically guarantee optimized performance of the window heater. Finally, an analytical model based on one-dimensional, steady-state heat transfer theories was proposed and successfully predicted the outer surface temperature of the rear window surrounded by cold air($-20^{\circ}C$) for the given operating conditions(heater power, inside and outside heat transfer coefficients, and surrounding air temperature, etc.).

  • PDF

Performance Analysis of a Cellular Networks Using Power Control Based Frequency Reuse Partitioning

  • Mohsini, Mustafa Habibu;Kim, Seung-Yeon;Cho, Choong-Ho
    • 한국통신학회논문지
    • /
    • 제40권3호
    • /
    • pp.559-567
    • /
    • 2015
  • This paper focuses on evaluating the performance of a cellular network using power control based frequency reuse partitioning (FRP) in downlink (DL). In our work, in order to have the realistic environment, the spectral efficiency of the system is evaluated through traffic analysis, which most of the previous works did not consider. To further decrease the cell edge user's outage, the concept of power ratio is introduced and applied to the DL FRP based cellular network. In considering network topology, we first divide the cell coverage area into two regions, the inner and outer regions. We then allocate different sub-bands in the inner and outer regions of each cell. In the analysis, for each zone ratio, the performance of FRP system is evaluated for the given number of power ratios. We consider performance metrics such as call blocking probability, channel utilization, outage probability and effective throughput. The simulation results show that there is a significant improvement in the outage experienced by outer UEs with power control scheme compared to that with no power control scheme and an increase in overall system throughput.

Ultrastructure of the Developing Epicarp in Fruit of Nerium indicum Mill. (Apocynaceae)-I

  • Thomas, Vinoth;Dave, Yash
    • Journal of Plant Biology
    • /
    • 제34권1호
    • /
    • pp.1-8
    • /
    • 1991
  • A sequential sub-cellular study of the epicarp of Nerium indicum has been performed. Outer epidermis of the ovary wall is covered externally with a thin cuticle. Cytoplasm possesses most of the cell organelles in the ovary stage itself. Outermost zone of the pericarp is the epicarp, developing from the outer epidermis. In the developing fruit, cell organelles are found with its maximum intensity. In mature fruit, the epicarp becomes multilayered due to additional development of few collenchymatous cells close to the outermost layer. Epicarpic cell possesses large central vacuole, around which a thin layer of cytoplasm is present. Number of cell organelles are considerably reduced in the mature fruit. In the ovary stage starch grains are electron transparent, while in the mature fruit it is fruit it is electron transluscent.

  • PDF

밀폐된 동시 회전 디스크 내의 주기적 유동 교란의 분포 (Distributions of oscillating flow fluctuation in the flow between corotating disks confined)

  • 공대위;주원구
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2006년도 춘계학술대회논문집
    • /
    • pp.392-395
    • /
    • 2006
  • The configuration of coaxial co-rotating contained in shroud provides a useful model for investigating the characteristics of flow in the HDD. Reynolds number is defined as $Re_R={\Omega}{R_o}^2/{\upsilon},\;Re_H={\Omega}R_oH/{\upsilon}$ in present study. An experimental investigation was performed for turbulence profiles and PSD distribution and vortices frequency behavior for various range of $Re_R=2.43{\times}10^4{\sim}3.61{\times}10^5$. A laser Doppler anemometry (LDA) is used to obtain the velocity field of unobstructed co-rotating disks flow. Airflow pattern visualization between inner and outer region was compared with turbulence profiles measured from LDA. Outer detached shear layer and dead-zone without oscillating velocity fluctuation to circumferential mean were quantitively traced.

  • PDF

3D Radiation-Hydrodynimics for surface turbulence of Low-mass Stars

  • Bach, Kiehunn;Kim, Yong-Cheol
    • 천문학회보
    • /
    • 제44권1호
    • /
    • pp.84.3-84.3
    • /
    • 2019
  • We investigate 3D radiation-hydrodynamics (RHD) for surface convection of the solar-type low-mass stars (M = 0.8, 0.9, and 1.0 Msun). The outer convection zone (CZ) of low-mass stars is an extremely turbulent region composed of partly ionized compressible gases at high temperature. Particularly, the super-adiabatic layer (SAL), the top of the CZ is the transition region where the transport of energy changes drastically from convection to radiation. In order to accurately describe physical processes, a realistic treatment of radiation should be considered as well as convection. As a starting model, the initial stratification in the outer envelope calculated using the solar calibrations in the context of the standard stellar theory. When the numerical fluid becomes thermally relaxed, the thermodynamic structure of the steady-state turbulent flow was explicitly collected. In this presentation, we compared thermodynamic properties of turbulent convection of the solar-type low-mass stars.

  • PDF

점 용접 너깃부에서의 변형률 측정에 의한 피로균열성장 예측 (Prediction of the Fatigue Crack Growth from Strain Measurement on Spot Welded Nugget Zone)

  • 김덕중
    • 한국공작기계학회:학술대회논문집
    • /
    • 한국공작기계학회 1997년도 추계학술대회 논문집
    • /
    • pp.140-145
    • /
    • 1997
  • In case of spot-welded joints, the fatigue cracks generally originate from the weld interfaces of the neighborhood nugget tips, and propagate toward the outer surfaces of the sheets. Generally, because fatigue crack was observed in nugget around, strain gage was attached at nugget zone. Accordingly, it was very difficult to detect the generation time of fatigue crack in spot-welded joints and to measure the propagation speed of fatigue crack. We developed the non-destructive method, according to which th fatigue crack propagation rate can be quantitatively estimated by utilizing information obtained from strain gages bonded on the electrode indentations of spot welds. The results measured by real crack were compared with the data which was measured by strain gauge method in fatigue testing. And so fatigue strength was evaluated by stress intensity factor. In this study behavior of fatigue crack propagation under repeated load were considered.

  • PDF