• 한국기계가공학회지
• /
• 제16권3호
• /
• pp.100-106
• /
• 2017

A universal outer diameter measurement module was developed using a linear variable differential transformer (LVDT). This outer diameter measurement module enables simultaneous measurement of outer diameter, displacement, and perpendicularity of bench-type high-precision products by combining analogue and digital measurement principles with mechanically precise and fine adjustment functions. The developed module showed a performance of 0.001mm in measurement resolution, 0.001mm in measurement accuracy, reference surface abrasion lower than Ra 0.1864, and measurement stability of 0.002mm. Therefore, we have acquired domestic measurement technology to improve productivity by securing technical competitiveness for universal diameter measurement technology, lower production costs through import substitution, and increased quality of products with more precise measurement technology. Furthermore, a substitution effect is expected for expensive import measurement system equipment used in production, research, and inspection sites in industries that produce precision processing products such as automobile and machine components.

• 대한임베디드공학회논문지
• /
• 제18권3호
• /
• pp.117-124
• /
• 2023

In the machine vision inspection equipment, diameter measurement is important process in inspection of cylindrical object. However, machine vision inspection equipment requires complex algorithm processing such as camera distortion correction and perspective distortion correction, and the increase in processing time and cost required for precise diameter measurement. In this paper, we proposed the algorithm for diameter measurement of cylindrical object using the laser displacement sensor. In order to fit circle for given four input outer points, grid search algorithms using root-mean-square error and mean-absolute error are applied and compared. To solve the limitations of the grid search algorithm, we finally apply the singular-value-decomposition based circle fitting algorithm. In order to compare the performance of the algorithms, we generated the pseudo data of the outer points of the cylindrical object and applied each algorithm. As a result of the experiment, the grid search using root-mean-square error confirmed stable measurement results, but it was confirmed that real-time processing was difficult as the execution time was 10.8059 second. The execution time of mean-absolute error algorithm was greatly improved as 0.3639 second, but there was no weight according to the distance, so the result of algorithm is abnormal. On the other hand, the singular-value-decomposition method was not affected by the grid and could not only obtain precise detection results, but also confirmed a very good execution time of 0.6 millisecond.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.742-747
• /
• 2004

Hard disk drives (HDD) in computer are used extensively as data storage capacity. PIV measurement system was used fur 2-dimensional visualization of the unsteady flow between co-rotating disks in air both with a shroud and both with a actual-like case. Geometric parameters are gap height (H) between disks in the case of shroud. The lobe- structured boundary between inner region and outer region was visualized, and the number of dominant vertices was determined clearly. It is found from flow visualization that the number of vortex cells can be correlated with Reynolds number based on H which is defined as R $e_{H}$ =ΩRH/v ranging from 7.96$\times$10$^2$ to 1.43$\times$10$^4$, and decreases as the disk speed increases. In the case of a actual-like case, the boundary between inner region and outer region appears cleary when head position located at outer diameter with no damper. It is detected with a case of head position middle diameter that the tip wake is generated behind HGA using PIV measurement and calculation.n.

• 한국기계가공학회지
• /
• 제12권3호
• /
• pp.61-68
• /
• 2013

Automatic measurement system is required since cycle time and cost of production are increased by various factors in manual systems. This paper presents a machine vision based prototype measurement system for the automotive axisymmetric shape parts which are generally measured by a manual system that is required the tolerance of the part is very small on each machined surface. This measurement system adopts a method in which optical lens is transferred along the profile of the part to minimize measurement cycle time. The main interest of this paper is a development of an optimum measurement algorithm to the outside diameter of the parts that can be applied to various combinations of hardware. The operating system used to implement the whole system is Window XP and corresponding environment.

• 대한치과기공학회지
• /
• 제42권2호
• /
• pp.113-120
• /
• 2020

Purpose: This study is to compare and analyze the shrinkage of the specimen after UV irradiation of UV cured resin at 5, 15, and 30 minutes. Methods: A cylindrical UV cured specimen was produced using a stainless steel mold. UV cured resin specimens were prepared in three groups: 5 minutes cured (5M), 15 minutes cured (15M), and 30 minutes cured (30M). The measurement was made in total 3rd. The measurement was made in total 3rd. The primary measurement was made after 24 hours using a digital measuring instrument. The 2nd and 3rd measurements were deposited in a constant temperature water bath and the shrinkage was measured. The measured data was calculated by referring to the ASTM C326 linear measurement calculation method. T-test and One-way ANOVA were performed to test the significance between groups. The post-test was conducted with Tukey (α=0.05). Results: When the inner diameter and the outer diameter of the three groups not placed in the water bath were compared and analyzed, the contraction was the smallest at 6.8% in the 5M group, and the contraction was the largest at 7.3% in the 30M group. In the outer diameter, the contraction of the 5M group was the smallest at 3.5%, and the contraction of the 30M group was the largest at 4.5%. Shrinkage decreased in all three groups immersed in a water bath for 3-7 days. Conclusion: In the UV cured resin specimen, the shrinkage increased as the amount of UV irradiation increased.

• 한국산학기술학회논문지
• /
• 제16권2호
• /
• pp.952-962
• /
• 2015

열간 링 롤링 공법은 열간단조 후의 잠열을 이용하기 때문에 가공 부하가 적고 최종 환형제품에 가까운 제품을 제조하는 장점이 있다. 본 연구에서는 열간 링 롤링 공법에 의한 대형 직경의 환형 부품의 다중형상 링 제조를 목표로 AFDEX2D 및 AFDEX3D/HEXA/RING 시뮬레이터(simulator)를 이용하여 열간 단조공정부터 링 롤링 공정까지 연계된 공정을 유한요소 해석하였다. 또한 링 롤링공정의 유한요소해석 시간을 줄이기 위해 소성변형이 일어나고 있는 영역에서만 요소망을 조밀하게 재구성하는 이중요소 시스템을 적용하였다. 이 유한요소해석 결과를 바탕으로 실제 공정을 설계하고 실험하여 개발된 제품이 품질 규격을 만족하는지를 확인하였다. 또한 링 롤링 실험 완성품을 통하여 부품의 품질수준 및 공정능력을 평가하였다. 그 결과, 개발된 환형 부품은 40%의 투입재료 감소과 최종 제품의 원소재 회수율이 24% 증가하였다. 또한 링 롤링 제품은 내, 외경의 진원도가 0.5mm로 우수하였으며 공정능력 분석결과 외경 Cpk 1.49, 내경 Cpk 0.85를 확보하여 환형 부품의 다중 형상 열간 링 롤링 공정의 최적화를 실현하였다.

• 한국전자파학회논문지
• /
• 제29권12호
• /
• pp.907-914
• /
• 2018

무선충전은 전선 없이 전자기기를 충전할 수 있다는 사용자의 편의적인 측면에 장점이 커 활발히 연구개발되고 널리 보급되었다. 하지만 무선충전패드에서 수신기의 중심이 어긋날 경우에 충전이 되지 않아 수신기의 중심을 잘 맞춰야 한다는 점은 사용자의 편의성이라는 무선충전의 효용성을 크게 저감시킨다. 본 논문은 이러한 무선충전의 한계를 극복하고자 수신기의 위치 자유도를 향상시키기 위한 코일 설계를 진행하였다. Tx 코일이 Rx 코일과 사이즈가 비슷할 때보다 외경 크기가 클 때 중심에서 효율은 다소 저하되었지만, 중심이 어긋날 경우의 효율이 개선되어 Rx 코일의 위치 자유도가 향상됨을 알 수 있었다. 이 때, Tx 코일에 내측 코일이 추가로 구성된 이중코일 구조를 제안하여 효율을 추가적으로 향상시킬 수 있었다. 자유도 개선 결과를 시뮬레이션과 측정을 통해 효율을 확인하였고, 경향성이 일치함을 볼 수 있었다. 측정 결과, 105~210 kHz 동작 주파수에서 송수신 코일의 전송거리 3 mm, 오정렬 15 mm일 때, 수신 코일에 전류가 1A 흐를 때 기준으로 기존 Tx 코일의 전송 효율은 37 %, 외경 크기를 키운 코일의 효율은 45 %, 내측 코일을 추가한 이중 코일은 47 %로 효율이 향상되었다.

• Journal of Information Processing Systems
• /
• 제1권1호
• /
• pp.36-40
• /
• 2005

TRISO (Tri-Isotropic)-coated fuel particle is widely applied due to its higher stability at high temperature and its efficient retention capability for fission products in the HTGR (high temperature gas-cooled reactor), one of the highly efficient Generation IV reactors. The typical ball-type TRISO-coated fuel particle with a diameter of about 1 mm is composed of a nuclear fuel particle as a kernel and of outer coating layers. The coating layers consist of a buffer PyC, inner PyC, SiC, and outer PyC layer. In this study, a digital image processing algorithm is proposed to automatically measure the thickness of the coating layers. An FBP (filtered backprojection) algorithm was applied to reconstruct the CT image using virtual X-ray radiographic images for a simulated TRISO-coated fuel particle. The automatic measurement algorithm was developed to measure the coating thickness for the reconstructed image with noises. The boundary lines were automatically detected, then the coating thickness was circularly by the algorithm. The simulation result showed that the measurement error rate was less than 1.4%.

• 대한치과보철학회지
• /
• 제44권2호
• /
• pp.165-173
• /
• 2006

Purpose: With gold electroforming system fir the double crown, the secondary crown is electroformed directly onto the primary crown. An even thick layer of high precision can be acquired. It is thought that the retention of electroformed outer crown is primarily acquired by the adhesive force (surface tension) through the saliva which is interposed between precisely fitted inner and outer crown. The purpose of this study was to investigate the effect of taper and surface area of inner crown on the retentive force of electroformed outer crown according to the presence of saliva. Materials and methods: 32 titanium inner crowns with cervical diameter of 8 mm and cone angles of 0, 2, 4, 6 degrees, which had same surface area by regulated height, were machined on a lathe. Another 32 titanium inner crowns with cone angles of 0, 2, 4, 6 degrees, which had doubled surface area by increased cervical diameter. were fabricated. Eight specimens of each group, for a total of 64 titanium inner crowns, were prepared. The electroformed outer crowns were fabricated directly on the inner crowns by using electroforming machine(GAMMAT free, Gramm Technik, Germany). The tertiary frameworks were waxed-up on the electroformed outer crown and cast using nonprecious alloy($Rexillium^(R)III,\;Jeneric^(R)/Pentronh^(R)$ Inc., USA). The cast metal frameworks were sandblasted with alubimium oxides and cemented using resin cement(Superbond C&B, Sun Medical Co., Japan) over the electroformed copings of each specimen. Then, artificial saliva($Taliva^(R)$, Halim Pharm. Co., Korea) was sprayed between the inner and outer crown, and they were connected under 5 kg force. The retentive force was measured by the universal testing machine(Tinius Olsen 1000, Tinius Olsen, USA) with a cross-head speed of 66.67 mm/sec. The direction of cross-head travel was exactly aligned with the path of removal of the respective specimens. This measurement procedures for retentive force of electroformed outer crown with artificial saliva were repeated in the same way without presence of artificial saliva. Results and Conclusion: The following conclusions were drawn: 1. The retentive force of electroformed outer crown was decreased according to increased taper of inner crown(P<.05). 2. The retentive force of electroformed outer crown showed no significant differences according to surface area and the presence of artificial saliva(P>.05).

• 한국임상수의학회지
• /
• 제25권6호
• /
• pp.501-505
• /
• 2008

Serial ultrasonographic examinations were performed on 9 Miniature Schnauzer bitches from day 15 of gestation until parturition to determine the ultrasonographic measurement of gestational structures. Ovulation was designated the day that plasma progesterone concentration exceeded 4.0 ng/ml (day 0). Extra-fetal structures were measured from day 17 or 18 to 60. Outer uterine diameter (OUD) increased from $6.50{\pm}1.06mm$ ($Mean{\pm}SD$) to $50.89{\pm}5.62mm$, inner chorionic cavity diameter (ICCD) increased from $2.10{\pm}0.15mm$ to $37.15{\pm}4.36mm$, and length of placenta (PL) increased from $7.50 {\pm}1.41mm$ to $40.62{\pm}3.27mm$. OUD and ICCD were significantly and linearly relative to gestational age especially through day 37, whereas PL was not significantly relative to gestational age. Of the extra-fetal structures, ICCD was the most accurate for estimation of gestational age before day 38 of gestation. Fetal structures increased at a linear rate to parturition. Fetal crown-rump length (CRL) increased from $2.55{\pm}0.07mm$ on day 22 to $85.25{\pm}9.89mm$ on day 48. Fetal head diameter (HD) increased from $3.43{\pm}0.64mm$ on day 27 to $25.06{\pm}0.41mm$ on day 63. Fetal body diameter (BD) increased from $ 5.96{\pm}0.84mm$ on day 30 to $43.76{\pm}3.36mm$ on day 63. Of the fetal structures, HD was the most accurate for estimation of gestational age after day 38 to parturition.