Browse > Article
http://dx.doi.org/10.14347/kadt.2020.42.2.113

Difference between shrinkage rate of irradiation amount of 3D printing UV curable resin and shrinkage rate according to a constant temperature water bath  

Kim, Dong-Yeon (4RD Dental Laboratory)
Publication Information
Journal of Technologic Dentistry / v.42, no.2, 2020 , pp. 113-120 More about this Journal
Abstract
Purpose: This study is to compare and analyze the shrinkage of the specimen after UV irradiation of UV cured resin at 5, 15, and 30 minutes. Methods: A cylindrical UV cured specimen was produced using a stainless steel mold. UV cured resin specimens were prepared in three groups: 5 minutes cured (5M), 15 minutes cured (15M), and 30 minutes cured (30M). The measurement was made in total 3rd. The measurement was made in total 3rd. The primary measurement was made after 24 hours using a digital measuring instrument. The 2nd and 3rd measurements were deposited in a constant temperature water bath and the shrinkage was measured. The measured data was calculated by referring to the ASTM C326 linear measurement calculation method. T-test and One-way ANOVA were performed to test the significance between groups. The post-test was conducted with Tukey (α=0.05). Results: When the inner diameter and the outer diameter of the three groups not placed in the water bath were compared and analyzed, the contraction was the smallest at 6.8% in the 5M group, and the contraction was the largest at 7.3% in the 30M group. In the outer diameter, the contraction of the 5M group was the smallest at 3.5%, and the contraction of the 30M group was the largest at 4.5%. Shrinkage decreased in all three groups immersed in a water bath for 3-7 days. Conclusion: In the UV cured resin specimen, the shrinkage increased as the amount of UV irradiation increased.
Keywords
UV; Curing; Resin; Shrinkage;
Citations & Related Records
Times Cited By KSCI : 4  (Citation Analysis)
연도 인용수 순위
1 ASTM C 326. Standard test method for drying and firing shrinkages of ceramic whiteware clays. 2009.
2 Cho NY, Lee IB. Polymerization shrinkage, hygroscopic expansion and microleakage of resin-based temporary filling materials. Restor Dent Endod, 33, 115-124, 2008.
3 Do HS, Kim DJ, Kim HJ. Application of UVcurable materials. JAIK, 4, 41-51, 2003.
4 Endruweit A, Johnson MS, Long AC. Curing of composite components by ultraviolet radiation: A review. Polym compos, 27(2), 119-128, 2006.   DOI
5 Feilzer AJ, de Gee AJ, Davidson CL. Increased wall to wall curing contraction in thin bonded resin layers. J of Dent Res, 68, 48-50, 1989.   DOI
6 Gjelvold B, Mahmood DJH, Wennerberg A. Accuracy of surgical guides from 2 different desktop 3D printers for computed tomography-guided surgery. J Prosthet Dent, 121(3), 498-503, 2019.   DOI
7 Iga M, Takeshige F, Ui T, Torii M, Tsuchitani Y. The Relationship between polymerization shrinkage measured by a modifed dilatometer and the inorganic filler content of light-cured composites. Dent Mater, 10, 38-45, 1991.   DOI
8 ISO 4049. International Organization for Standardization. Dentistry-Polymerbased filling, restorative and luting materials. 2009.
9 Kim DY, Kim JH, Kim HY, Kim WC. Comparison and evaluation of marginal and internal gaps in cobalt-chromium alloy copings fabricated using subtractive and additive manufacturing. J Prosthodont Res, 62, 56-64, 2017.   DOI
10 Kim DY, Jeong ID, Kim JH, Kim HY, Kim WC. Reproducibility of different coping arrangements fabricated by dental microstereolithography: Evaluation of marginal and internal gaps in metal copings. J Dent Sci, 13, 220-225, 2018a.   DOI
11 Lin WS, Harris BT, Pellerito J, Morton D. Fabrication of an interim complete removable dental prosthesis with an inoffice digital light processing threedimensional printer: a proof-of-concept technique. J Prosthet Dent, 120(3), 331-334, 2018.   DOI
12 Kim MS, Kim WG, Kang W. Evaluation of the accuracy of provisional restorative resins fabricated using dental 3D printers. J Korean Soc Dent Hyg, 19, 1089-1097, 2019.
13 Kim SB, Kim NH, Kim JH, Moon HS. Evaluation of the fit of metal copings fabricated using stereolithography. J Prosthet Dent, 120(5), 693-698, 2018b.   DOI
14 Lee HY, Im YG, Kim BG, Lim HS, Kim JH. The effect of water immersion on the surface strength and the flexural strength of the acrylic resin for occlusal appliances. J Oral Med Pain, 35(1), 75-81, 2010.
15 Park JH, Choi NS. Polymerization shrinkage distribution of a dental composite during dental restoration observed by digital image correlation method. Compos Res, 30, 393-398, 2017.   DOI
16 Park JS, Park MG. Effect of aging treatment on the flexural properties of polymer provisional restoration materials. Korean J Dent Mater, 40, 215-221, 2013.
17 Revilla Leon M, Ozcan M. Additive manufacturing technologies used for processing polymers: current status and potential application in prosthetic dentistry. J Prosthodont, 28(2), 146-158, 2019.   DOI
18 Shin DH, Park YM, Park SH. Correlation between UV-Dose and shrinkage amounts of postcuring process for precise fabrication of dental model using DLP 3D printer. J Korean Soc Manuf Process Eng, 17, 47-53, 2018.
19 Watts DC, Cash AJ. Determination of polymerization shrinkage kinetics in visible-light-cured materials: methods development. Dent Mater, 7, 281-287, 1991.   DOI
20 Yang HS, Park SW, Lim HP, Yun KD, Park C, Lee DY. Proposal of practical digital implant treatment protocol: A case report. J Kor Dent Assoc, 57, 529-533, 2019.