• 한국통신학회논문지
• /
• 제39C권1호
• /
• pp.60-69
• /
• 2014

감시경계 분야에서 진동센서를 이용한 발자국 탐지방안 연구가 지속적으로 이루어지고 있다. 진동센서는 탐지성능은 우수하나 야외 환경에서 사용 시 잡음에 매우 민감하게 반응한다. 본 논문에서는 비선형 주파수 차감 후 기본 발자국 모델 신호와 입력 신호 간의 교차상관을 수행하여 잡음은 감쇄시키고 발자국 신호는 증대시켜 탐지성능을 높일 수 있는 NSSC 방법을 제안한다. 이러한 잡음 제거과정 이후 탐지 이벤트 구간에 대한 식별 과정을 수행함으로써 실제 사람 발자국 여부를 최종 판단한다. 제시된 알고리즘의 성능 검증을 위하여 맑은 날, 비 오는날에 수집된 발자국 신호에 대한 실험 결과를 제시하였다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2007년도 동계학술발표대회 논문집
• /
• pp.99-104
• /
• 2007

Tracer gas technique is widely used to measure the ventilation rates and/or ventilation effectiveness of building spaces. However, the conventional method using a single tracer gas can measure only outdoor air change rates in a single zone. This paper deals with the multi-gas tracer technique to measure air exchange rates between rooms. Interzonal air movements are important to characterize overall ventilation performance of complicated multi-zone buildings. Experiments are conducted in a simple two-room model with known airflow rates using tracer gases of SF6 and R134a. The concentration decays of two tracer gases are measured after simultaneous injections in each room. The governing equations are derived from the continuity and the mass balance of each room. The data reduction procedure are developed to obtain the inter-room airflow rates using the governing matrix inversion, and various data manipulation methods are tested, such as data shift, interpolation, smoothing, and etc, to improve the estimate and interpretation of the results.

• 전자공학회논문지 IE
• /
• 제48권1호
• /
• pp.45-50
• /
• 2011

본 논문에서는 UHF RFID 시스템을 콘크리트 블록에 매립하기 위해 다양한 종류의 RFID tag를 선택하여 실험한다. 매립된 tag의 수신율을 측정하기 위해 매립 깊이를 달리하고, 재질을 바꿔가며 감쇄율을 측정한다. 실험결과에서 콘크리트의 혼합비율은 성능에 큰 영향을 주지 않는 것을 알 수 있다. 본 연구는 GPS 신호를 사용할 수 없는 유비쿼터스 환경의 실내에서 위치기반의 서비스를 위해서 필요한 위치정보를 얻어 내는 방법인 RFID 시스템의 기반시설 매립에 초점을 맞춰 진행한다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.119-122
• /
• 2000

Recently polymer insulators are being used for outdoor high voltage applications. Polymer insulators for transmission line have significant advantages over porcelain and glass insulators, especially for ultra-high voltage transmission lines. Their advantages are light weight, vandalism resistance and hydrophobicity. Polymer insulators are a relatively new technology, but their expected life is still unknown. Therefore these estimating technique are very important. Their life time is related to weathering and operating condition. Multi-aging test is requested because aging factor is occurred by multi-aging than unique aging. The aging test about polymer insulators have mainly carried out by IEC 61109. This paper presents multi-stress chamber experiments and tracking wheel test to examine the tracking and erosion performance of polymer insulator for transmission. Multi-stress testing is able to demonstrate deficiencies of polymer insulator materials and designs, including the nature of interfaces in insulation design. We have investigated IEC 61109 Annex C (5000h aging test) and CEA tracking wheel test as test methods of artificial accelerated aging. The aging degree of polymer insulator is estimated by leakage current, measurement of hydrophobicity degree, damage conditions of insulator surface, withstand voltage test etc.

• 한국환경보건학회지
• /
• 제23권4호
• /
• pp.57-66
• /
• 1997

Successful energy conservation and good indcfor air quality (IAQ) are highly dependent on ventilation system. Air filtration is a primary solution of indoor air control strategies in terms of reducing energy consumption and improving ihdoor air quality. A conventional system with bypass filter, as it is called variable-air-volume/bypass filtration system (VAV/BPFS), is a variation of the conventional variable air volume (VAV) systems, which is designed to eliminate indoor air pollutant and to save energy. Bypass filtration system equipped with a high-efficiency particulate filter and carbon absorbent provides additional cleaned air into indoor environments and maintain good IAQ for human health. The objectives of this research were to compare the relative total decay rate of indoor air pollutant concentrations, and to develop a mathematical model simulating the performance of VAV/BPFS. All experiments were performed in chamber under the controlled conditions. The specific conclusions of this research are: 1. The VAV/BPFS system is more efficient than the VAV system in removing indoor air pollutant concentration. The total decay rates of aerosol, and total volatile organic compound (TVOC) for the VAV/BPFS system were higher than those of the conventional VAV system. 2. IAQ model predictions of each pollutant agree closely with the measured values. 3. According to IAQ model evaluation, reduction of outdoor supply air results in decreased dilution removal rate and on increased bypass filtration removal rate with the VAV/BPFS. As a results, we recommends the VAV/BPFS as an alternative to conventional VAV systems.

• Journal of Power Electronics
• /
• 제10권2호
• /
• pp.187-193
• /
• 2010

This paper proposes a cooling system using thermoelectric elements for improving the output of building integrated photovoltaic (BIPV) modules. The temperature characteristics that improve the output of a BIPV system have rarely been studied up to now but some researchers have proposed a method using a ventilator. The efficiency of a ventilator depends mainly on the weather such as wind, irradiation etc. Because this cooling system is so sensitive to the velocity of the wind, it is unable to operate in the nominal operating cell temperature (NOCT) or the standard test condition (STC) which allow it to generate the maximum output. This paper proposes a cooling system using thermoelectric elements to solve such problems. The temperature control of thermoelectric elements can be controlled independently in an outdoor environment because it is performed by a micro-controller. In addition, it can be operated around the NOCT or the STC through an algorithm for temperature control. Therefore, the output of the system is increased and the efficiency is raised. This paper proves the validity of the proposed method by comparing the data obtained through experiments on the cooling systems of BIPV modules using a ventilator and thermoelectric elements.

• 융합신호처리학회논문지
• /
• 제15권3호
• /
• pp.80-84
• /
• 2014

Dark channel prior는 열화되지 않은 실외 영상의 경우 각 픽셀과 이웃 픽셀의 컬러 채널 중에 하나는 0에 가까운 값을 가진다는 것으로, 열화된 영상의 열화 정도를 추정하는 데 활용될 수 있다. 즉, 영상이 블러에 의해 열화되면 dark channel 값이 주변 픽셀과의 평균을 통해 증가하게 된다. 본 논문에서는 이러한 dark channel의 변화를 이용하여 영상블러의 세기를 측정하는 방법을 제안한다. 주어진 크기의 가우시안 블러와 수평 모션 블러를 삽입한 영상에 대한 실험을 통해 제안된 방법의 유용성을 검증한다.

• 한국멀티미디어학회논문지
• /
• 제11권6호
• /
• pp.860-868
• /
• 2008

Human detection techniques in outdoor scenes have been studied for a long time to watch suspicious movements or to keep someone from danger. However there are few methods of human detection in overhead or near-field view scenes, while lots of human detection methods in far-field view scenes have been developed. In this paper, a set of five features useful for human detection in overhead view scenes and another set of four useful features in near-field view scenes are suggested. Eight feature-candidates are first extracted by analyzing geometrically varying characteristics of moving objects in samples of video sequences. Then highly contributed features for each view scene to classifying human from other moving objects are selected among them by using a neural network learning technique. Through experiments with hundreds of moving objects, we found that each set of features is very useful for human detection and classification accuracy for overhead view and near-field view scenes was over 90%. The suggested sets of features can be used effectively in a PTZ camera based surveillance system where both the overhead and near-field view scenes appear.

• 한국정보통신학회논문지
• /
• 제12권8호
• /
• pp.1495-1504
• /
• 2008

2007년부터 흰색 바탕의 자동차 번호판이 등록되어 사용되고 있다. 본 논문은 그레이 레이블링 기법과 퍼지 추론 방법을 이용하여 새롭게 사용되고 있는 흰색 번호판을 추출하기 위 한 방법을 제안한다. 먼저 비재귀 Flood-filling 알고리즘을 개선한 그레이 레이블링(labeling) 기법으로 번호판 후보 영역을 추출한다. 추출된 레이블에 대한 적합도를 퍼지 추론 시스템에 의해 산출한 후 후보 레이블 중에서 가장 적합도가 높은 레이블 영역을 최종 번호판 영역으로 추출한다. 실내외 주차장 및 거리에서 핸드폰 및 디지털 카메라로 획득한 다양한 자동차 번호판 영상을 대상으로 실험한 결과 94%의 추출 성공율을 나타내었다.

• Smart Structures and Systems
• /
• 제24권5호
• /
• pp.607-616
• /
• 2019

The video deflectometer based on digital image correlation is a non-contacting optical measurement method which has become a useful tool for characterization of the vertical deflections of large structures. In this study, a novel imaging model has been established which considers the variations of pitch angles in the full image. The new model allows deflection measurement at a wide working distance with high accuracy. A monocular video deflectometer has been accordingly developed with an inclination sensor, which facilitates dynamic determination of the orientations and rotation of the optical axis of the camera. This layout has advantages over the video deflectometers based on theodolites with respect to convenience. Experiments have been presented to show the accuracy of the new imaging model and the performance of the monocular video deflectometer in outdoor applications. Finally, this equipment has been applied to the measurement of the vertical deflection of Yingwuzhou Yangtze River Bridge in real time at a distance of hundreds of meters. The results show good agreement with the embedded GPS outputs.